Answered ad about Dooling engine from nero1156. I got response from Jonathan Alvarez. I never looked to make sure it was from nero1156so made deal and sent money to pay pal for pay pal account for davismichelline. Known as Tristan Levens.Money was sent through freinds so there is no recourse. for me. Never send money through friends.Got no response and no motor.

RadioMaster TX-16S
- Crossfire Micro Tx V1
- FPV Monitor
- 5.8 GHz Receiver w/ RHCP Antenna

Maybe you can answer this. I'm using a DX6 Radio, AR631 Spektrum Receiver and Hitec HS425BB Analog Servos. I see where to choose Analog on my radio, but not sure if it's confirmed??? How do you tell? Also does the AR631 Receiver work with Analog Setting on my Radio and with the Analog Servos? And, do all Spektrum Receivers work well with Analog Servos?

Model airplane news contacted me on fb to feature my TSR-2 rocketplane this month!

1. The BetaFPV SuperG Gemini module fits the X20 Pro perfectly, unlike the HappyModel ES24TX Slim Pro which I've been using on the X20/X18/TWIN X-Lite but would not seat on the X20 Pro.

2. Latest ETHOS ELRS Script supports Gemini just fine

3. ETHOS 1.5.x now supports selectable baud rates for ELRS Modules.

I am concerned that I will pull the aileron wire(s) out of the crimp connectors when removing the wing from the fuselage. I tried to repair a broken wire from one crimp. The solder held but the blob was too big for the crimp connector to be locked into the plastic housing. The board has exposed contacts that are 1 mm spacing and I don’t want to risk a bad solder joint.

To reduce damage to the wires and crimp connection I have installed a loop of spider wire fishing line into a hole that I drilled in the white plastic housing.

Hemostats or needle nose plyers could be used to remove the connector with out stressing the wires but this pool string works just as well.

Before building an RC model plane I typically like to research the pilot for Christian connections and build a 1/48 scale model of his or her plane. The smaller plastic models usually contain amazing detail. The build helps me catch nuances, too.

Eddie Rickenbacker frequently called upon the name of the Lord when flying and later in life when he was stranded for 21 days in a raft with a B-17 crew. An article that he wrote appeared in the first edition of Guidepost magazine.

This plastic model was a Christmas gift and built by DML Models. It is a 1/48 scale model, but the box had been opened and the bust was not included in this model kit. It also contained photoetched parts. I made a trip to the Air Force Museum in Dayton, Ohio, for close-up research. Camoflage was a new challenge for me on this build.

The cockpit has a shelf around the front which made instrument placement interesting. I stayed pretty close to production standards, including making masks from green Frog painters tape. One glitch was the decals. They required soaking in water for at least 30 minutes. Most of the bigger decals, like roundels, shattered when trying to remove them. The final roundels were used from another kit. However, the nomenclature on the rudder and the hat-in-the-ring logo remained largely intact.

Maybe, just maybe, I’ll build an RC version one day. If you have any suggestions let me know....Continue Reading

I have for your consideration a Carl Goldberg ARF Tiger 400. The kit contains all necessary hardware, prop, spinner, wheels and motor. This is the smaller model of the Carl Goldberg Tiger ARF. This plane can easily be assembled to be ready to fly in less than a day.

Enhanced the Vertical Stab of my 2nd used Hangar9 F4U-1D 50-size (57-inch wingspan). This model had already suffered during previous owner who flew it at Grass Field only and flip-overs were a common thing.

Well, it happened again on my watch as the model veered off the textile runway and onto the adjacent grass area and it performed a flip-over. The Vertical stab is made of soft Balsa only construction and the need for some rigid and stronger construction is certainly needed as I was shocked that there were no harder wood in its Vertical stab. This now will be at least resistant to damage in case another flip-over occurs.

Hangar9 F4U 1D 50 size Vertical Stab Enhancements 04-14-2024 (1 min 53 sec)

Several r/C airplanes for sale or trade. Also parts and supplies. There are sailplanes powered modes.
1007 summit Street HenryettaOklahoma. I have a workshop out front.

This week I did something radical. I rounded up four RC planes that I enjoyed and took them to my LHS to sell:
1. Ford Flivver 1/5 scale my first build from plans
2. DW Hobbies kit: Hansa Brandenburg w.29 in a 1920 Denmark Sea Rescue livery
3. DW Hobbies Kit: Griffin -- a well-worn flying "warmliner"
4. Parkzone Extra 300

All four of these would be welcome in most everyone's hangar. However, I made a life decision that jettisoned these.

I want to build, display, and fly RC scale models that stand for something. As a Christian, I would ideally want them to reflect a pilot who was a Christian. Anything merely historical or just cool to fly just won't make the cut for me right now. And there’s some things I’d love to build some day.

But I’m responding to a higher calling. I'd like to be known as flying planes with a purpose.

Over these past 8 years, I have many RC planes that have been game-changers for me. Being associated with a Piper PA-14 Family Cruiser that carries markings like Nate Saint is where it started. Spend much time in my blogs and you'll notice something different. I did too. Eliminating four planes may not sound like much, but after letting two go last year began the step. One is in a museum and the other is waiting on pickup from a guy in Texas.

What are you known for? Would it require you to focus on your own priorities and letting go?

This is my Uncut 4S Golden Hour Flight with the Brand New E-flite Micro Draco RC STOL Bush Plane.

Uncut 4S Golden Hour Flight | E-flite Micro Draco RC STOL Bush Plane (5 min 25 sec)

Episode 196: "Cops and Robbers" is now live!
https://rcroundtable.com/podcasts/mp...pisode_196.mp3

In this episode, Lee and Terry chat with Garret Hultgren about Altitude Hobbies and using drones for police work.
-Multiplex Pacer (3:30)
-Meet Garret (10:00)
-Police drones (30:00)
-But DJI (46:00)
-Heli event report (1:03:30)
-Workbench updates (1:07:45)
-National Fun Fly (1:27:00)

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: contact@rcroundtable.com

So, sometimes a Red Neck just gets overwhelmed.

I'd planned on flying Draco during the totality of last week's solar eclipse. Got everything set up (I thought), with some drones, videos cameras and Draco locked and loaded with 4 GoPros.

BUT, I fooled around way too long with my big video camera, and blew through my 4 minutes of darkness, watching the whole thing like a neanderthal staring at fire. By the time I got Draco cranked up, the backside of the eclipse had burst the Hill into sunlight, but I figured to just go ahead and have a flying day in the somewhat calm air that hadn't been around in the past few weeks.

So, here's Draco, playing over the hill. The sun is still partially blocked, but is so bright that the GoPros couldn't discern it with the settings I'd chosen.

Hope all my buds made it safely through the event with functioning retinas!

Draco Goes Flying, But Missed the Eclipse (3 min 34 sec)

Yep Les Amis,
NE RATEZ PAS CETTE VIDEO !!!
Encore du lourd avec le fameux HOVERAir X1... Nouvelles fonctions et améliorations !
Bon visionnage et, Je compte sur vous 😊

HOVERAir X1 X1 Upgrade / Améliorations - Mon SMART cadreur - ANNONCE IMPORTANTE ! (17 min 54 sec)

🧐NOTATAZ : 19,5/20 Un MUST HAVE !!!
Chez Banggood (VENTE FLASH) :
- HOVERAir X1 (352€) : https://www.banggood.com/custlink/3GDVfom4Ei
- HOVERAir X1 Combo : https://www.banggood.com/custlink/D3KVuaD4Rn
Site officiel :
- HOVERAir X1 ( coupon HOVER10EU) : https://shrsl.com/4hlv9
- HOVERAir Batterie : https://shrsl.com/4ayr5
- HOVERAir Hub de chargement : https://shrsl.com/4ayr6
Sur AMAZON :
- HOVERAir X1 X1 (Amazon) : https://amzn.to/3PZCm6I
Le vélo de la vidéo :
- ENGWE P275 ST : https://shrsl.com/4hi5j

😏Prévisions et Nouveautés, Bientôt en TEST en vidéo :
- KFPLAN KF603 Mer Terre Air : https://www.banggood.com/custlink/mKG5gr5BD9
- ENGWE P275 ST : https://shrsl.com/4hi5j
- Fafrees F20 X-Max : https://bit.ly/3Ugk0B6
- Lankeleisi MG600 Plus : https://pboost.me/8yb2
- DUOTTS N26 ( coupon 100€ TAZKILLER85) : https://bit.ly/3uVM1ns
- Montre KOSPET TANK T3 Ultra : https://s.zbanx.com/r/s8HQ2F6jrZY5
- SG PINECONE FORSET 1201 pro (coupon BG1201RC ) : https://www.banggood.com/custlink/DKvtAe3JdH
- Intelligent Pump engwe : https://shrsl.com/4h2wf
- Tronsmart HALO 200 : https://amzn.to/3TGud84

COMMENT AIDER LA CHAINE :
- FAIRE UN DON à la chaîne (...Continue Reading

Yep les AMIS,
Modifs et Upgrades en version Carbone ... Quelques conseils et mon avis final !
Bon visionnage à TOUS et merci à TOUS de votre soutien 😘

RLAARLO Omni Terminator carbon Upgrade & Big Lipo - Conseils Démo Avis ! (18 min 12 sec)

🧐NOTATAZ : 19/20 Toujours un Must Have !!!

- OMNI-T version métal : https://bit.ly/42JDOPL
- OMNI-T version carbone : https://bit.ly/3IcnSMc
- OMNI-T version ROLLER (sans élec) : https://bit.ly/48xyPDa
- Pièces détachées OMNI-T : https://bit.ly/3SOqlRV
- Lipo 3S 4500 mAh XT60 : https://amzn.to/3Pz2IMI
Radio et récepteur utilisé :
- Radiocommande Rlaarlo CT8A (avec RX Gyro) : https://rlaarlo.com/products/8-chann...l?ref=cBC5KGcT
- Récepteurs pour CT8A : https://rlaarlo.com/products/8-chann...n?ref=cBC5KGcT
Vu précédemment :
- AK 787 Carbon RTR : https://bit.ly/3Tmn5PC
- AK 787 Metal RTR : https://bit.ly/46W179l
- AK 787 Carbon Roller : https://bit.ly/489CuqK
- AK 787 Metal Roller : https://bit.ly/48gVq7g
- AK 787 Carbon RTR 2 moteurs : https://bit.ly/48eaIcD
- Rlaarlo AK-917 Carbone ( 328€ avec ce coupon 10% FOR AK-917 ): https://bit.ly/3nHkVMR
- Rlaarlo AK-917 Métal (coupon 10% FOR AK-917 ) : http://bit.ly/3GkgH4i
- Desert Buggy AM-D12 (coupon AMD12) : https://rlaarlo.com/pages/am-d12?ref=cBC5KGcT
- AM-D12 pièces détachées : https://rlaarlo.com/collections/rlaa...s?ref=cBC5KGcT
- Lipo 2S 3300mAh 35C (XT60) : https://bit.ly/3MiGFZD
- Roues avant mousse : https://bit.ly/...Continue Reading

After 10 years of debugging firmware, hacking CAD models, etching boards, reworking solder, rewinding motors, the lion kingdom saw an RC golf cart in the field. It was negotiating grass without any problem.


https://batcaddy.com/products/batcaddy-x3r

This one has a full transmitter, skid steering, heading hold for $700. They claim at least 18 holes or 4 miles of range but getting 8 miles of range has a $1000 tag. Maybe it goes farther without any payload or more range can be hacked with cheaper batteries. The rigid, smooth wheel design wasn't expected on grass.

https://motogolf.com/products/bat-ca...ric-golf-caddy

This one just has a power assist but no RC or steering.

The remote control is an interesting design. It's very specific to golf needs & emphasizes autonomy. A timer button drives it forward by fixed distances, using odometry. The speed of the timer button is set by a pot on the truck itself. It probably maxes out at 4 mph. Continuous forward & backward use single press buttons to increment the speed. Stopping is a different button & definitely not a matter of letting go. Turning requires holding a button.

It has a passive braking system based on a gearbox. They're probably good old geared, brushed motors.

A separate panel on the truck itself allows odometry movement.

Honestly thought it would be up to the level of brushless, direct drive motors & fully proportional remote control but they're able to charge a lot of money for a...Continue Reading

Quadra 75. Aanco retracts w custom made struts. Smoke.38 lbs. Fiberglass fuselage; built up wing .
Middle-Century Jet 81" DLE 55RA
front - 69 " built from BT plans in 1994 and still flying albeit w several upgrades

I bought decals from Ebay. The yellow Wrangler on the side looks different than the yellow 3 on top. The blue background is showing through on the Wrangler, but not on the 3. They look the same on the decal sheet, but the yellow Wrangler is not made as thick or maybe the not the same material as the yellow 3. It looks like 2 different color yellows on the body.

Once again thanks to illsmoq for being nice enough to let this go needed some oil on its motor and flys amazing the transmitter was refurbished by me (broken switch, screen not working, sound module not beeping things like that) and it does just fine controlling the models I hope to have many more flights with this little plane its one of the better ones!

Also figured out oil makes the paint really sticky whoops