I dont know what I'm going to put it on , but I just ordered the new 2012 zyx gyro. I think I want to try it on a plane . I like myGee Bee that has as3x system in it.
I hope JOHN Z adds this to his software I cant read chiniese

Originally Posted by VISTAVEGA

I dont know what I'm going to put it on , but I just ordered the new 2012 zyx gyro. I think I want to try it on a plane . I like myGee Bee that has as3x system in it.
I hope JOHN Z adds this to his software I cant read chiniese

I received the shipping notice from oomodel today, so soon I will know if I can talk to it.

01011001 01101111 01110101 00100000 01100011 01100001 01101110 00100000 01100100 01101111 00100000 01101001 01110100 00100000 01001010 01101111 01101000 01101110 01011111 01001110 01011010

translated for us noobs

You can do it John_NZ

I ordered mine last night from hobby wing, says they shipped it already . does anyone know were to find program for it?Even if its chiniese like to down load it and c what its like.

Originally Posted by John_NZ

I received the shipping notice from oomodel today, so soon I will know if I can talk to it.

i'm confident it will talk to you john if not the zyx-s must be crazy....

thank

Originally Posted by VISTAVEGA

I ordered mine last night from hobby wing, says they shipped it already . does anyone know were to find program for it?Even if its chiniese like to down load it and c what its like.

http://www.kingwjg.com/tool/ZYX3.0CHS.rar

thks John

Hi, I got rid of "Wobble of Death" by shortening servo arm ball distance from 12 to 8 mm, on my CopterX 450, like you told me.
All was nice, BUT... Today I flew twice, then decided to remove the training kit and, sadly, I immediatly got "WOD" again :-(
The training kit seemed to somewhat stabilize the heli / FBL module.
What can I do now to get rid of it again ? Lower some gain ?
Thanks in advance for any help.

I've put 9 flights on my 450 copterx with cx3x1000 after fixed servo problem . Found out I like it better on f3c mode better than soft 3d not quit as quick on the sticks. I have a 450 x from blade with the 200 dollar beastx ,It flys a little better but not $170 dollars better

Also had the wobble of death on my 450pro with Tarot FBL head. Just managed to dial it out... finally. My problem was that the blades were not at 0 pitch at mid stick with an un-altered pitch curve. I used the default servo to swash lengths for a flybar 450pro and this was the problem. Linkage lengths for a 450pro with a tarot head need to be in the 35-36mm vicinity with the servo horns at a approx right angle to the swash/servo linkages. Pitch range is around 26 degrees, +12, -14 with mid stick at around -1 with collective range set at 60 in John_NZ's software. Should also mention I used the reccomended distance of 12.5-13mm for control ball mounting on the servo horns.
I had a pitch range of 26 degrees with collective set at 60 when I was having WOD issues but zeroing the pitch at mid stick (or close to) has fixed the issue.
So responsive yet stable.Now I just have to improve my flying skill so I can fly it without fear of wrecking it Heli kept wanting to tip as I was putting on power for lift off, was a close one. Ah well back to the flymentor SE v2 for now.

Thanx to all those in this thread who have contributed and helped me nut out the WOD issue on my heli.

Originally Posted by VISTAVEGA

I've put 9 flights on my 450 copterx with cx3x1000 after fixed servo problem . Found out I like it better on f3c mode better than soft 3d not quit as quick on the sticks. I have a 450 x from blade with the 200 dollar beastx ,It flys a little better but not $170 dollars better

The F3C mode is very smooth, but the tail was too slow for my liking.

Do bear in mind you can easily tame down the response of the hotter presets by using expo and D/R.

Originally Posted by 2Doggs

The F3C mode is very smooth, but the tail was too slow for my liking.

Do bear in mind you can easily tame down the response of the hotter presets by using expo and D/R.

And by lowering the roll/pitch agility settings.

Originally Posted by beenflying

And by lowering the roll/pitch agility settings.

....and then you end up with a chimera, with the tail of a Soft 3D grafted onto the head of an F3C....!

can I go into the tail settings in advanced menue and set it the same as soft 3 d?
I did notice the tail didnt stop quit as fast but still very aceptible .

Any possibility of producing an Android app to use with the bluetooth dongle in post #1? Probably wouldn't need all of the setup options but maybe the advanced and parameter setting options.
Could fine tune with a phone at the field then