Complete YS X6 system for sale.

The system has never been installed.
Will be shipped from Denmark EU.

800 USD via Paypal

Hi guys just a quick question will here be any issues if I use my 2.4 radio with the 2.4 wifi module?

thanks

Originally Posted by rukie

Hi guys just a quick question will here be any issues if I use my 2.4 radio with the 2.4 wifi module?

thanks

I use it all the time without any problem what so ever.

Just do a range check but I am sure it will be just fine.

Regards

Willie

That is a basic version or standard with 16 WP ?

It's the 4 WP version

hi willy, can you tell me difference between x4 and x6 please. is it only the gimbel controll or also some difference in flying like att hold or gps acurracy?
thanx

Originally Posted by anyvision

hi willy, can you tell me difference between x4 and x6 please. is it only the gimbel controll or also some difference in flying like att hold or gps acurracy?
thanx

Depending on what you want to fly. If you want to fly octo, then you don't have Gimbal control. Everything smaler with 4 and 6 motors you do have gimbal control. GPS and alt hold are about the same.

Regards

Willie

Guys,
1) is present in YS-X4 the features RTH, or I only present in ys-x6?
2) There is a limit in 4 waypoint ys-x6. Are 4 waypoints with no limits as in YS-X4?
3) the software GDS for ipad/iphone iOS is only possible on the YS-X6, right?
4) I would use a long range data link but I can not use the system 900mhz, because used by the 3g mobile phones in italy.
So I would use the datalink module 433mhz, but I would use the scherrer uhf 433mhz to control RC. How should I do?
I noticed the Wi232 modules 869mhz, ok to europe, but it is not very powerful for long range..

Originally Posted by giuseppe10091989

Guys,
1) is present in YS-X4 the features RTH, or I only present in ys-x6?
2) There is a limit in 4 waypoint ys-x6. Are 4 waypoints with no limits as in YS-X4?
3) the software GDS for ipad/iphone iOS is only possible on the YS-X6, right?
4) I would use a long range data link but I can not use the system 900mhz, because used by the 3g mobile phones in italy.
So I would use the datalink module 433mhz, but I would use the scherrer uhf 433mhz to control RC. How should I do?
I noticed the Wi232 modules 869mhz, ok to europe, but it is not very powerful for long range..

1. yes
2. both 4 wayponts 200m but if you upgrade the 4 to to navigator then you have unlimited range.
3. the two systems use the same grounstation software
4. how far do you want to fly? I don't see Multirotors as longrange capable because of limitations on battery power? all my multirotors give me between 5 and 15 minutes depending on payload. how far can you fly in 15 minutes and come back? I can do that on any 2.4g radio with no longrange system.

Regards

Willie

Originally Posted by Willie

1. yes
2. both 4 wayponts 200m but if you upgrade the 4 to to navigator then you have unlimited range.

then the standard has 4 waypoints, but are not unlimited...blocked to 200m. So would be better ys-x4 for long range. Right?

Originally Posted by Willie

3. the two systems use the same grounstation software

Are you sure? I had read that ys-x4 will have a GDS iOS in the future...not now...

Originally Posted by Willie

4. how far do you want to fly? I don't see Multirotors as longrange capable because of limitations on battery power? all my multirotors give me between 5 and 15 minutes depending on payload. how far can you fly in 15 minutes and come back? I can do that on any 2.4g radio with no longrange system.

using motors from 370kv, propellers 1655 and 6s 15AH battery 1850gr ... I can give 40-50min ... I have yet to test it...Using a 800mm quad frame with weight 500g...and I need to carry only a gopro with fpv camera and a small tx 1.3g 500mw. So maybe I was going to go for 433mhz as datalink and 2.4g with amplifier to control RC. But I prefer use the 433mhz to control rc. I do not really like the 2.4g to control long range.

Originally Posted by giuseppe10091989

then the standard has 4 waypoints, but are not unlimited...blocked to 200m. So would be better ys-x4 for long range. Right?

standard YS-X4 has also 200m limit upgraded YS-X4 to navigator has no limit

Are you sure? I had read that ys-x4 will have a GDS iOS in the future...not now...

I use the same software on my pc and Android for both systems. Ipad and Iphone software does not work if it is not jailbreaked, that is on the YS-X6. here I dont know about the YS-X4 but as I understand it is the same.

using motors from 370kv, propellers 1655 and 6s 15AH battery 1850gr ... I can give 40-50min ... I have yet to test it...Using a 800mm quad frame with weight 500g...and I need to carry only a gopro with fpv camera and a small tx 1.3g 500mw. So maybe I was going to go for 433mhz as datalink and 2.4g with amplifier to control RC. But I prefer use the 433mhz to control rc. I do not really like the 2.4g to control long range.

Keep us posted on your flight time. I am very interested.

Originally Posted by Willie

I use it all the time without any problem what so ever.

Just do a range check but I am sure it will be just fine.

Regards

Willie

Thanks willie!

I really hope nothing happens (mine is still in china) sent it back for repair (long story)

I have lot invested in this ysx6 build and i dont want any problems on radio frequencies.

By the way what is your range using a modem and the ysx6 module? Im planning to extend the range (once I have it flying) using a 2.4 ghz signal booster.

Anybody have experience on this, while using a 2.4 radio?

Originally Posted by rukie

Thanks willie!

I really hope nothing happens (mine is still in china) sent it back for repair (long story)

I have lot invested in this ysx6 build and i dont want any problems on radio frequencies.

By the way what is your range using a modem and the ysx6 module? Im planning to extend the range (once I have it flying) using a 2.4 ghz signal booster.

Anybody have experience on this, while using a 2.4 radio?

I never fly the copter out of sight and I never have communication problems. I do use a 2.4 sinal booster when I do long distance with a Skywalker but not on the copter.

Regards

Willie

Originally Posted by Willie

I never fly the copter out of sight and I never have communication problems. I do use a 2.4 sinal booster when I do long distance with a Skywalker but not on the copter.

Regards

Willie

whats your setup on the skywalker? do you have a blog for it?or a thread entry? Im also exploring that possibility using instead of using the 433 lrs for around 2-4km run.

Originally Posted by giuseppe10091989

using motors from 370kv, propellers 1655 and 6s 15AH battery 1850gr ... I can give 40-50min ... I have yet to test it...Using a 800mm quad frame with weight 500g...and I need to carry only a gopro with fpv camera and a small tx 1.3g 500mw. So maybe I was going to go for 433mhz as datalink and 2.4g with amplifier to control RC. But I prefer use the 433mhz to control rc. I do not really like the 2.4g to control long range.

Please check your calcs again using eCalc. Make sure you change the pull down tab to Without Drive. I am sure you have made a mistake somewhere