Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Nov 12, 2012, 07:05 AM
wazoo22 is online now
Find More Posts by wazoo22
Registered User
wazoo22's Avatar
France, Bourgogne, Nevers
Joined Feb 2012
1,034 Posts
V-tail with OSD Pro-- possible?

Tried two external mixers, with elevator through the osd pro and rudder direct. One worked, but had a big lag time. The other worked, but twitched, as if it were counting to seven, then started over. some weird timing issue.

How can I use a v-tail with the osd pro?
wazoo22 is online now Find More Posts by wazoo22
Reply With Quote
Sign up now
to remove ads between posts
Old Nov 12, 2012, 12:40 PM
billpa is offline
Find More Posts by billpa
billpa's Avatar
Joined Nov 2003
4,982 Posts
Hi, I would recommend posting your v-tail question to the OSD Pro thread here, listing the types of mixers you have tried, brand of model & radio, etc. Chances are someone has set up the same config before.
billpa is offline Find More Posts by billpa
Site Sponsor
Reply With Quote

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted EzOSD, OSD PRO with GPS or Dlink OSD Juninou FPV Equipment (FS/W) 1 Oct 23, 2012 02:35 PM
Discussion Eagle Eyes Ground Station with other OSD than OSD Pro ? BillyJo FPV Talk 3 May 26, 2012 09:56 AM
Discussion Updating/flashing OSD Pro firmware without data logger, possible? sleziak Eagle Tree Systems 1 Jan 10, 2012 12:50 PM
Sold Sharon Pro 3.7 V Tail with additional X Tail fuse and stabs lestingoy Aircraft - Sailplanes (FS/W) 7 May 23, 2010 10:22 PM