|
|
|
For sale
I have a few engines and radios for sale.
OS 45 SX- missing needle valve $45.00 NIB OS .46AX $75.00 Evolution .46 # tanks run $45.00 Tower Hobbies T424 4 channel radio $40.00 Futaba T6L 6 channel Radio $50.00 Both radios will come with the receiver shown, I will throw in a receiver battery pack and your choice of all the servos I have(20 or so). I will also sell servos for $5.00 each. I have a mix of Futaba Hitec and a couple other brands I cant remember. Some New in Package PM or text 817-718-5129 |
|
|
|
|
|
|
FREE ! AS3X programming cables
I have 2 AS3X programming cables that I will give to any club member that needs them. I have both the USB cable that works with your personal computer and the "smart phone" cable that works with the iStore and PlayStore apps. If you use AS3X receivers and would like to have these cables, just get in touch and we'll figure out how to get them to you.
Gary James |
|
|
|
|
|
30 Futaba S 3102 servos for sale SOLD
I have 30 Futaba S 3102 servos for sale. I have tested each one to make sure they work. $15.00 Each or if you want more than 4 it will be $13.00 each.
WYSIWYG Thanks for looking Product Number: FUTM0034 Stall Torque (4.8V): 64 oz/in. (4.6kg.cm) Torque: 4.8V: 51.0 oz-in (3.67 kg-cm) 6.0V: 64.0 oz-in (4.61 kg-cm) Speed: 4.8V:0.25 sec/60° 6.0V:0.20 sec/60 Motor Type: 3-Pole Motor Modulation: Analog Potentiometer Drive: Indirect Drive Bearing Type: Bronze Bearings Gear Type: All Metal Gears Dimensions: 1.1" x 0.5"x 1.2" (28 x 13 x 30mm) Weight: .7oz. (21g) |
|
Last edited by Stealdesk; May 04, 2019 at 08:48 AM.
|
|
|
|
Tonegawa Seiko PS-050 - Professional Series Muscle Servo
I am selling these for 125.00 each. The mounts have been shortened slightly will not affect operation. WYSIWYG
Tonegawa Seiko PS-050 high torque servos A precision electro-mechanical servo motor for Radio Control applications with requirements exceeding those of recreational hobby models... The "Muscle" servo for RPV's, UAV's, & UVS projects. Industrial and special effects robotics...ruggedly designed and built for hostile environments and performance-critical applications. SPECIFICATIONS: Operating Voltage: V min-max: dedicated 4.8-12.0 VDC, not shared w/receiver Recommended operating voltage: Vin: 6.0-8.4 VDC Starting torque: Ms 65.33 Kg/cm (907 oz/in) @ 6.0 VDC 91.50 Kg/cm (1271 oz/in) @ 8.4 VDC Speed: 0.29 Sec/60 deg (no load) at 6v 0.21 sec/60 deg (no load) at 8.4V Weight: 280 grs (10 oz) Size: Length: 100mm (3.94") including mounting flange 75mm (2.95") body only Width: 44mm (1.73") Height: 93mm (3.66") w/output arm installed 79mm (3.10") body only |
|
|
|
|
|
GONE Free pick up curb side
1109 greendale dr Bedford TX 76022 |
|
Last edited by Stealdesk; May 13, 2019 at 04:49 PM.
|
|
|
|
Large B25 Mitchell 7 ft wingspan
Large b25 for sale or trade to anyone interested it has a little left to be finished but will make a very nice plane when finished I just don’t have the time and I’d like to see someone finish and fly it ..it measures 5ft 2 and half inches long that measurement is not including nose cone and tail section .. wingspan is 7 ft wing tip to wing tip .. make me a offer I have everything to finish the plane just no motors esc controller and so on..just servos retracts and wiring for flaps has been done if u want pics text me at 8173437739 thank you and godbless
|
|
|
|
||
|
Quote:
I just purchased a Carbon Cub S+ with AS3X and I would be very glad if I could get this USB to PC programming cable Thanks in advance if still available |
|
|
||
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
Discussion | For Sale/ Trade/ Wanted at the South Eastern FPV Event | HansAuf | 6th Annual South Eastern FPV Event | 9 | Jun 06, 2016 05:52 PM |
Discussion | For Sale/ Trade/ Wanted @ SEFF | Vapor Trails | SEFF 2016 | 94 | Apr 16, 2016 11:56 AM |
Discussion | For sale/wanted | techspy | Weak Signals Show 2016 | 55 | Apr 03, 2016 05:26 PM |
Discussion | My Swyft if for sale in the For Sale/Wanted area | Tim K | DLG Hand Launch Gliders & F3K | 1 | Dec 07, 2008 08:46 PM |