Now only if we could get all the crack brotherhood together for some combat, that would be Epic.

That 14gm motor looks like a good canidate for frankenyak. Hmm!

Ok........Well first I built and painted Brads, brought the old shredder scheme back. Then I started working on mine which I should have in the air today.

Originally Posted by hercdriver7777

Let the Crack Combat begin!

Way ahead of you... I've already taken out a Flyzone Corvalis with mine

EDIT: Whoah wait what? New plane???

Nice Dan your have a real flare when it comes to plane art.

Thanks bro

Telnik 43" or Crack Yak 32" - which ones easier to learn 3D on and impress the ladies at the park?

Originally Posted by Left Coast DJ

Telnik 43" or Crack Yak 32" - which ones easier to learn 3D on and impress the ladies at the park?

Crack Yak 32... you will have a fan club after a short time of going to the same part... lol...!!
.
cdee
.

Man... if only that wing used the same batteries as the CY or maybe 1300's I'd be all over it. Bigger one in the future maybe??

so how do i get a Dan 5.0 custom painted wing?

cause those are bad ass.

Guys I wanted to share a little build trick we've been toying with in order to keep from gluing your servos in permanently, and this works outstanding.

For servo installation simply run a bead around the servo and let cure. As for the servo slot just smear Welders into the foam it you don't want a bead of Welders in there. This is easily an over night cure on the glue too. If the glue is at all tacky it will be in there like concrete. If done correctly the two Welders surfaces create a rubbery hold that keeps the servo from moving but makes removing them very easy...

Originally Posted by Left Coast DJ

Telnik 43" or Crack Yak 32" - which ones easier to learn 3D on and impress the ladies at the park?

If you need a plane to impress the ladies you need to re-think your stratergy Mate

Originally Posted by Kris...

If you need a plane to impress the ladies you need to re-think your stratergy Mate

yea, but if you are impressing a lady with a plane, it might be the lady you want to latch onto...
.
cdee
.

Originally Posted by KamikazePilot

Now only if we could get all the crack brotherhood together for some combat, that would be Epic.

That 14gm motor looks like a good canidate for frankenyak. Hmm!

Combat crackathon at SEFF?

Crack Series Motors..!!

for those of you that have not noticed, there have been some new motors added to the Crack Series family.

http://www.twistedhobbys.com/Crack-S...Motors_c80.htm

The 50g motor works really well in the 39" models, 80g in the 44" models and the 100g in the 48" models for monster power.
.
cdee
.

Originally Posted by hercdriver7777

Combat crackathon at SEFF?

you got me thinking about coming out now...
.
cdee
.