Originally Posted by rclab1

I did use the 7C radio trims and it stopped the twitching, .....
then when I went full right (and full left) went back to center,
then came back the twitch some more? I tried trimming it left and right,,,,,
it kept twiching at center (neutral point)and also when I had
it stopped all the way to the right and all the way to the left.....
twitched some more on the extreme end (full Left, full Right)
????
is it because I dont have a UBEC?

that gyro appears to be a g401b. heres a link to everything you could possibly want to know. link

the full left / full right you are experiencing is from the gyro being in heading hold mode. the gyro needs to see a negative value on its control channel to be in rate mode. not sure the easiest way to do this on futaba... on spektrum, its easiest to gear endpoints.
-sj

Aaron_gx

"The black and red wires go to your battery. 9-30V input. This'll keep your 5v system supplied quite nicely. Plug the reciever plug into your reciever's spare port somewhere...."

that 9-30V input,....what do you yourself use? a separate Lipo pack?

Originally Posted by rclab1

Aaron_gx

"The black and red wires go to your battery. 9-30V input. This'll keep your 5v system supplied quite nicely. Plug the reciever plug into your reciever's spare port somewhere...."

that 9-30V input,....what do you yourself use? a separate Lipo pack?

My summit is brushless, I run 11.1lipo. I just take power right from the deans connector for the esc.

SonicJ
that gyro appears to be a g401b. heres a link to everything you could possibly want to know. link

the full left / full right you are experiencing is from the gyro being in heading hold mode. the gyro needs to see a negative value on its control channel to be in rate mode. not sure the easiest way to do this on futaba... on spektrum, its easiest to gear endpoints.
-sj

thanks,
I still have figure out my Radio (7CAP Futaba) then I'll sort out that gyro. too complicated for me right now.....

Originally Posted by rclab1
Aaron_gx

"The black and red wires go to your battery. 9-30V input. This'll keep your 5v system supplied quite nicely. Plug the reciever plug into your reciever's spare port somewhere...."

that 9-30V input,....what do you yourself use? a separate Lipo pack?
My summit is brushless, I run 11.1lipo. I just take power right from the deans connector for the esc.

I run the stock EVX-2 ESC and brushed motor with (2) 2s Lipo's.
How do I connect that UBEC?
Do I connect it to One of my Lipos powering the ESC?
confused here....also
I know I plug the servo connector end to the batt port of my RC rx.

also, I snip the red wire on the esc connector going to the RC rx.

any updated Vids guys.....
come on,,,,,entertain us.... :-)

Originally Posted by rclab1

any updated Vids guys.....
come on,,,,,entertain us.... :-)

Make your own. Show us what you're up to.

HariEdo.....hahahaha LOL....
I will, let me learn how to put up Vids....

Originally Posted by rclab1

any updated Vids guys.....
come on,,,,,entertain us.... :-)

The summit is out of commission right now... Camera, tilt servo were borrowed for my airplane projects...

I can run the summit in the wintertime, cant fly in the wintertime

I keep seeing some cool construction sites I want to explore though. In good time, in good time.

I wonder what oh what has happened to wobby? He must be up to something BIG. He never stays quiet this long.

Originally Posted by rclab1

HariEdo.....hahahaha LOL....
I will, let me learn how to put up Vids....

simple... drive, record, upload. Easy like pie.

Editing is another story though...

I have a plan to do a long range test with my car.

But have to go over small streams along the beach as i go.
so water proffed stuff and put some wings on my car to make it go over areas of water.


this is kind on entertaining, because it is different and the future video should be cool

EKRANOCAR for FPV (1 min 35 sec)

Originally Posted by rclab1

any updated Vids guys.....
come on,,,,,entertain us.... :-)

.........

Originally Posted by David22

I have a plan to do a long range test with my car.

But have to go over small streams along the beach as i go.
so water proffed stuff and put some wings on my car to make it go over areas of water.


this is kind on entertaining, because it is different and the future video should be cool

David, you've been planning this for a long time... Less talk more action
j/k of course... My "caged beast" is anything but long range.

I was wondering about wobby also. Sure hope he is okay.

been flying a plane instead recently

The local BMX bike track was redone and fixed up the other day so i want to try that as well.

trouble shooting my ground staion to make it work better at this time, but for sure will make more vids with my car

slash 2X4 front wheel drive

There is also a club that guys race cars at. i would like to go there when everyone else is not there and practice the course.

FPV

then show up and do the race with them, fpv

I think I can beat them

if it is easier inthe air it sould be also on the ground?