help with tx and rx cristals - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 06, 2009, 01:46 PM
Registered User

help with tx and rx cristals

i have a 4 channel heli 2 futaba 8 channel rxs a 6 channel tx.i cant figure out how or what cristals will work with them.can someone advise?i have several cristals the futaba rx says high band on one and nothing on other they are FP-R138dp dual conversion.the tx is a old 6 channel futaba. i have these cristals 72.110 dual conversion rx 16 bottom of rx says 16 72.110 mhz the tx has a 16 72.110 gws cristal.i get nothing also i have alot that says stuff like type 72-4b fm rx or 72-6 fm tx also type 72-4 fm on back says 72.790 have tried matching them up with nothing so far
Sign up now
to remove ads between posts
Feb 06, 2009, 07:13 PM
trex 500esp msh protos
henryd123's Avatar
remember you must change the transmitter from ppm to pcm to use that receiver,after you have changed it you have to switch off then back on again to implement the change. its only the receiver that needs the dual conversion crystal,the tx uses the standard tx crystal

Last edited by henryd123; Feb 06, 2009 at 07:13 PM. Reason: typo

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Beginner needs help with Tx/Rx/ESC oneilljm Beginner Training Area (Aircraft-Electric) 9 Sep 06, 2008 06:58 PM
Discussion Help with Tx Rx joeyjojojjjjjj DIY Electronics 2 May 23, 2008 03:50 PM
Help with TX/RX klong66 Radios 7 Mar 24, 2005 11:17 PM
Help with Tx/Rx combo choice crooser Radios 2 Nov 14, 2004 11:51 PM
Help with TX training system rtucker Beginner Training Area (Aircraft-Electric) 9 Apr 12, 2002 07:24 PM