Thread Tools
Feb 03, 2009, 04:26 PM
It took me 30 years?!?!!!
Could also be with a Reaper 25? Or is this more in between the 25 and the 35? (Do they make a "30"?)
Sign up now
to remove ads between posts
Feb 03, 2009, 04:49 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
Maybe if we ask nicely, Scott will design a 30. OTOH, the 25 makes a lot of power and would pull it around fine...
Feb 03, 2009, 04:57 PM
Registered User
I would definitely like to see a Reaper 30. Stronger than the 25 but just under the the 35 for these 40"ers. Scott?
Steve
Feb 03, 2009, 04:57 PM
Team Extreme Flight
Doc Austin's Avatar
We've waited long enough. Are they here yet?
Feb 03, 2009, 05:00 PM
May the Farce be with you...
refugeefromcalif's Avatar
Quote:
Originally Posted by Doc Austin
We've waited long enough. Are they here yet?
And in Yellow?

George
Feb 03, 2009, 05:05 PM
Registered User
CFisher1421's Avatar
Quote:
Originally Posted by refugeefromcalif
And in Yellow?

George

Your wish... is his command...

Or were you talking about a yellow motor???
Feb 03, 2009, 05:14 PM
May the Farce be with you...
refugeefromcalif's Avatar
Quote:
Originally Posted by CFisher1421
Your wish... is his command...

Or were you talking about a yellow motor???
Yellow Slick. Black, (Reapah), motor.

George.
Feb 03, 2009, 06:00 PM
Registered User
GoldCraft's Avatar
Oh Yeah....Ill have one in Yellow!
Feb 03, 2009, 06:20 PM
www.ReaperBrushless.com
The Reaper's Avatar

Reaper GR30


hey guys

we have a design for one but in this economy i dont think i will be putting it into production , if you guy want them i would have to do a private preorder and make a limited run of 50 pieces so i would need 50 guys to get together to order them ahead of time. We may end up doing the same thing on the GR60XL

scott

Quote:
Originally Posted by blucor basher
Maybe if we ask nicely, Scott will design a 30. OTOH, the 25 makes a lot of power and would pull it around fine...
Feb 03, 2009, 06:47 PM
Just fly,its just money.
Scott,

Ill be number one on that preoder

Will
Feb 03, 2009, 07:14 PM
Registered User
GoldCraft's Avatar
The Thrust 30 looks pretty good....might be a bit heavy

Motor specs
Outside Diameter 37.2mm
Length 37mm
Weight (gr/oz) 105gr / 3.7oz
Motor Shaft Dia. 5.0mm
Mounting Bolts Dia. M3
Max efficiency Current A * 18-28A
Peak current A (15 sec)* 39A
Battery pack range ** 2~4 LiPo / 6-12 NiCd
Poles 14
KV rpm/V 905
Recommended ESC PA Quantum 40
Peak Watts 420 watts
Last edited by GoldCraft; Feb 03, 2009 at 07:20 PM.
Feb 03, 2009, 07:44 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
I'd suggest guys planning for the 42" Slick keep the motor selection under 90 grams...70-85 or so is best.
Feb 03, 2009, 10:04 PM
Team 3DHS
BoneDoc's Avatar
Looks great... I still can't believe that it's a 42" and not the 51"
Feb 04, 2009, 08:17 AM
Registered User
mattk0's Avatar
Quote:
Originally Posted by blucor basher
I'd suggest guys planning for the 42" Slick keep the motor selection under 90 grams...70-85 or so is best.
Looks like the Motrolfly 2810-1200 (http://shop.subsonicplanes.com/produ...3&productId=13) would be a good fit too..

From the subsonicplanes.com site:
MAX CURRENT 32A
VOLTAGE 7.4 TO 11.1
NON-LOAD CURRENT 1.36A
EFFICIENCY 87.4%
RESISTANCE 0.029 OHMS
WEIGHT 88 GRAMS
BATTERY 2-3 LIPO
NOMINAL POWER 230 WATTS
PROP RANGE 10X5 TO 12X6
SUGGESTED ESC FM30A
Feb 04, 2009, 10:08 AM
Registered User
ambientech's Avatar
This Scorpion motor looks very good!!

Scorpion 3008-28

Stator Diameter ............................ 30.0 mm (1.181 in)
Stator Thickness ............................. 8.0 mm (0.315 in)
No. of Stator Arms ................................................ 12
No. of Magnet Poles ............................................... 14
Motor Wind ........................................... 28 Turn Delta
Motor Wire ...................... 10-Strand 0.19mm (32 AWG)
Motor Kv ........................................... 1253 RPM / Volt
No-Load Current (Io) ................................. 1.53 Amps
Motor Resistance (Rm) ............................. 0.072 Ohms
Max Continuous Current ............................... 30 Amps
Max Continuous Power ................................ 400 Watts
Weight ........................................ 85.5 Grams (3.02 oz)
Outside Diameter ......................... 37.50 mm (1.476 in)
Shaft Diameter .............................. 4.97 mm (0.197 in)
Body Length .................................. 25.9 mm (1.019 in)
Overall Shaft Length ....................... 64.5 mm (2.539 in)
http://www.innov8tivedesigns.com/pro...products_id=72


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video 3DHS 51" AJ Slick - Cow pasture 3D blucor basher Electric Plane Talk 33 Dec 04, 2010 07:52 PM
Video 3DHS 89" AJ Slick Electric blucor basher Electric Plane Talk 28 Dec 04, 2010 04:31 PM
Sold 3DHS AJ Slick NIB trade for trex 450v2 hairymuffin Aircraft - Electric - Airplanes (FS/W) 3 Oct 11, 2008 08:39 PM
Video 3dhs AJ Slick harrier machine FlopGun Electric Plane Talk 3 Oct 08, 2008 11:04 PM