Project QR-1 - Rutan Quickie Racer - Page 8 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 13, 2009, 01:42 PM
Registered User
Geode's Avatar
A wake up call from Alex to revive this project from hibernation ......

Wing will get bagged with 1.5oz glass, 2mm CF spar and 3oz CF spar cap.

Fuselage .... to glass or not glass? It's pretty beeffy now, seems like I can get away without glassing. What do you think?
Sign up now
to remove ads between posts
Jun 13, 2009, 02:41 PM
Firecracker!
BillO's Avatar
Nice to see you back on this project! Fuse is EPP, right? What about just a coat of thinned Goop and strapping tape?
Jun 13, 2009, 04:55 PM
Composites Kid
Alex.Schweig's Avatar
Quote:
Originally Posted by Geode
A wake up call from Alex to revive this project from hibernation ......


You donīt need to glass it.

You may be able to sheet it in cartulina and PU, which works great and is super-tough, or you can use brown paper and PU, which is lighter.

Iīve seen wings for electrics made this way and its almost as strong as balsa sheeting.
Jun 14, 2009, 03:14 PM
Registered User
Geode's Avatar
Bill & Alex,

Thanks for the tips. Life is a lot easier with tape and Goop/PU.
Sep 22, 2009, 04:22 AM
Registered User
wher is a quickie?
Last edited by mindaugasj; Jan 29, 2010 at 11:15 AM.
May 04, 2010, 12:25 PM
Registered User
Matt Chester's Avatar
Any progress on your project?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
trying to find CG for burt rutan quickie aaronredbaron Modeling Science 31 Jun 01, 2012 03:00 PM
A good Axis project. Stuart Warne Scale Kit/Scratch Built 57 Apr 27, 2005 07:27 AM
WTB: St. Croix Burt Rutan Quickie Matt Chester Aircraft - Fuel - Airplanes (FS/W) 0 Apr 19, 2004 01:19 PM
Info needed on the Rutan Quickie Mike Hall Modeling Science 12 Apr 16, 2004 06:21 AM
Scale PSS Project Mr B.... Slope 10 Jun 12, 2003 01:13 AM