Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 09, 2001, 11:13 PM
Buildn it one stick at a time!
G.F. Beurling's Avatar

Looking for 8'-9' DH Mosquito Kit.


Guys,
I don't know of any gas or glo Mossie models out there that I can build a 90"- 108" model. I don't want to form my own canopy, as well as I prefer to have as many pre-made parts supplied as possible. The Brian Taylor 81" model is too small, and his 124" too large. Can you help?
Sign up now
to remove ads between posts
Jun 10, 2001, 07:42 PM
Balsa Builder
Paul Susbauer's Avatar
Hey Randall, I see you're still looking for a twin to build. Glad you liked the article.

A relative of mine from Canaday (Eh?) He's built a smaller Mossie before that used two Saito .45's and now he's building the Brian Taylor Mossie (81" span) with two Saito .65's.

He said that the Mossie is one of his favorite twins to fly as every thing is basically set at the thrust line (nothing too high or too low.

One note though, the flaps cause it to balloon a lot so you might want to mix in some elevator with it.
Jun 11, 2001, 12:11 AM
Sloping off....
leccyflyer's Avatar
Randall

See my reply to your other post in the Scale Modelling forum.

Brian