OV-10 - Looking for kit or plans. - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Mar 09, 2003, 01:59 PM
Registered User
VfrOnly's Avatar

OV-10 - Looking for kit or plans.

Iíve been looking for an OV-10 kit with no luck. Iím beginning to doubt if one exist. If anyone out there knows where I could find one, or at least some plans, it would be greatly appreciated.
Sign up now
to remove ads between posts
Mar 09, 2003, 02:27 PM
Gravity sucks.
mrittinger's Avatar
I think K and A models has one for twin 400's. Hobby Hangar has kit for two geared 05's .

Mar 09, 2003, 03:24 PM
Registered User
VfrOnly's Avatar
Fantastic, I appreciate it. I canít wait to get this project started. My father spent 30 years flying for the Marine Corps and was in the first OV-10 squadron. I am going to surprise him at his birthday picnic this summer with a surprise fly-by. Should be interesting. Thanks again.
Mar 09, 2003, 03:38 PM
KOMET 44's Avatar
Rich Uravitch offers a larger version of his bronco too.(81"W.S.)He is the designer of the hobby hangar OV-10.Plans are avalibile from M.A.N. www.rcstore.com good luck,stefanP
Jun 20, 2003, 04:59 PM
Cleared Hot!
Merlin_FAC's Avatar
VFROnly, what's your dad's name? Point him to this website, we'd love to have him aboard:


(shameless plug off now hehehe)
Jun 21, 2003, 06:04 AM
It's a Great Day to Fly
LenBFP's Avatar

I have plans for an OV-10 that takes 2 sp400 motors. The DXF is 2.6MByte in size. Will your email accept that? Contact me at:


and I will send it.

I also have a GIF that is 175KByte, but I am not sure if it will print at the correct size.

Last edited by LenBFP; Jun 21, 2003 at 06:27 AM.
Jun 27, 2003, 10:36 PM
Registered User

This is what the model from the plans would look like. My friend built it and I was the test pilot.

He used two geared Speed 300 motors and cut down GWS 3 bladed props. Batterys were 6 cell Sanyo 3000 and 3300.

It flew during it's maiden flight but when we tried 7 cells we had some problem and I crashed the plane. Fortunately the damage was only minor. I would suggest you keep it light. And try changing the airfoil, since the one specified in the plan is quite thick.
Jun 29, 2003, 01:43 AM

Yep - still have it

I have a K&A kit of the OV-10 - yours if you want it for $80 + shipping.

Also found my MEC Zero untouched "kit" ARF...forgot I had purchased a 'spare'

Good to dig through the piles of stuff sometime!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
OV-10 - Looking for kit or plans. VfrOnly Parkflyers 2 Mar 09, 2003 08:15 PM