6.5 foot span B-24 Liberator - RC Groups
Thread Tools
Jan 10, 2009, 09:24 PM
Registered User
Douglas C's Avatar

6.5 foot span B-24 Liberator

I am building a very large (for me ) blue foam B-24 Liberator.
Sign up now
to remove ads between posts
Jan 10, 2009, 09:28 PM
Registered User
Douglas C's Avatar


The wing is 6 feet 7 inches in span. I started with a flat bottom piece cut to the wing plan form and then cut the ribs to match the airfoil minus the thickness of the fan fold foam. All the electronics were then installed before the top skin.
Jan 10, 2009, 09:30 PM
Registered User
Douglas C's Avatar

motors and speed controls

I used for inexpensive Tower Pro motors from Grayson. All the speed controls were disabled and I use a SportBEC to power the reciever.

Jan 10, 2009, 09:36 PM
Registered User
Douglas C's Avatar


The fuselage was built from 1/2 inch blue foam so that I could sand the corners down to make the b-24 shape. It is not perfect scale but I think its looking pretty good so far.
Jan 10, 2009, 09:41 PM
Registered User
Douglas C's Avatar

Clear parts

All the clear parts were done by Keith Sparks of Parkflyer Plastics and they are just great. He has a whole line of pilots also that I will use to crew the Liberator. The scale of my plane was determined by the plastic parts as Keith had done them for a guy that was making a wood built Liberator so I just blew up some three views at Kinkos till they matched the parts.

Jan 10, 2009, 09:46 PM
Registered User
Douglas C's Avatar

wing saddle

I cut the wing saddle out after the final shaping of the fuselage and it is held on by magnets. It is how I get to the wing bolts and all the electronics and the receiver.

Jan 10, 2009, 09:47 PM
Registered User
Douglas C's Avatar

she is going to be a big one

Jan 10, 2009, 09:54 PM
Registered User
Gary_Canada's Avatar
Very cool project. Can't wait to see flight report and possibly some videos.

Thanks for posting your pics.
Jan 10, 2009, 09:59 PM
Go guerrilla
jfv61's Avatar
Subscribed. Looking forward to more pics, flight report, how about video?
Jan 10, 2009, 11:14 PM
Registered User
Wow! Great job so far.

Jan 10, 2009, 11:26 PM
Oh no, not again!
jhspring's Avatar
Very cool indeed. Following with great interest.

Jan 10, 2009, 11:28 PM
kwhabq's Avatar

Being a B-24 fan, I am impressed by this build.

I'm probably not alone wondering this, but could you explain about disabling the speed controllers? How, and what is the result?


Jan 11, 2009, 12:11 AM
Registered User
Looks great,
keep supplying pictures.
Jan 11, 2009, 12:44 AM
Registered User
TRP's Avatar
Looks excellent so far.

You foam guys amaze me.

Jan 11, 2009, 08:02 AM
Go guerrilla
jfv61's Avatar
Originally Posted by kwhabq
...explain about disabling the speed controllers?...
I believe he means that he disabled the BEC on the speed controllers (he mentioned he was using a separate BEC).

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Anyone done a 90" Jack Stafford B-24 Liberator? G.F. Beurling Scale Kit/Scratch Built 21 Mar 27, 2010 12:18 AM
Discussion B-24 Liberator Anyone? pda4you Electric Warbirds 225 Oct 12, 2009 05:16 PM
Pics. of my Big B-24 Liberator !!!! speedo Scale Kit/Scratch Built 15 May 21, 2007 05:37 PM
Wanted B-24 Liberator Daves Aircraft Works or other CarreraGTSCS Aircraft - Electric - Airplanes (FS/W) 1 Jun 20, 2006 07:11 PM
FS: Stafford B-24 Liberator NIB slapstix Aircraft - Fuel - Airplanes (FS/W) 2 May 08, 2004 03:12 PM