Thread Tools
Oct 28, 2009, 06:04 PM
Registered User
Hi all had my b900 v2 on the slope the other week here is the vid...... Wind was 15knots+

http://s1018.photobucket.com/albums/...ry900001-1.flv

Sign up now
to remove ads between posts
Oct 28, 2009, 06:06 PM
Registered User
Quote:
Originally Posted by Up&Away
I think I found the answer already. The new B900 is A/E controlled.

How thick is the wing? Would servos like the HS45 (or similar size) fit?
Yer thats what ive got in mine. They hang out the bottom a little 3mm
Nov 08, 2009, 04:29 PM
Registered User
are the servo's bay already made in the wing? or you have to cut it?
Nov 08, 2009, 05:01 PM
flying is not a dream
lebenj's Avatar
No, you have to make them by yourself.
it's more work, but you can do them where you want.
Nov 12, 2009, 09:40 PM
Registered User

What model of Thamazo servo


Quote:
Originally Posted by randomtask
Hi Little G,

I'm using Tahmazo servos which seem to be similar to the d47. Just epoxy it down and it sits nicely without hitting the canopy.

Cheers,
Adnan

Hi adnan,

Can you pointed out the specific model of the Thamazo servo that similar with the D47 servo ? ... and can you point out where did you bought it ? ..

Thanks.

-sam
Nov 12, 2009, 11:11 PM
flying is not a dream
lebenj's Avatar
the D47 are perfect servos, but the the wing is to thin for them!
it works, but it's not a perfect integration inside the wing for ailerons.

i'm very very slow for the construction.... i have now the wing ended....
i have now to work with boom and pod!
Nov 16, 2009, 02:32 AM
Registered User
Quote:
Originally Posted by acurusaragon
Hi adnan,

Can you pointed out the specific model of the Thamazo servo that similar with the D47 servo ? ... and can you point out where did you bought it ? ..

Thanks.

-sam
Hi Sam
Thamazo T1002 from Ok model (Japan) is same size as D47 servo.

Harry
Nov 16, 2009, 07:59 PM
Registered User
Harry ... thanks for the info.
Nov 23, 2009, 05:30 PM
the best laid plans.......
thequieteuropean's Avatar
@ lebenj

the wing is too thin for 8 millimeter d 47 ?

what did you use?

cheers

rio
Nov 24, 2009, 02:14 PM
flying is not a dream
lebenj's Avatar
yes! my wing was too thin for a D47, so i'm using 2 D47 servo!!!

i think there is no other way to mount them as they tell in the manual.

also, as the servos are near the pod, it's not a very big issue, but i'm still disopointed with that!!!

a little draw speak better than me!
Nov 24, 2009, 10:18 PM
Physics hate's my ideas
GreenAce92's Avatar
rotary drive!
Nov 25, 2009, 03:50 AM
flying is not a dream
lebenj's Avatar
yes, rotary drive could be a solution. but i'm not even sure that it would be entire inside the wing in the RDS position.
and RDS looks really harder to build.... but for sure better and more beautiful.

does someone know where to buy small D47 RDS systems?




my binary will be ready in few days... still have to finish the mount of the servos and ailerons servo wiring...

The elevador is attached buy 2 screws to make the binary easier to travel!

with a correct CG i think i will be betweenn 147 and 150 grams. included a low batt, model lost alarm.
this module is 4,5gr weight and it's perfect for me to have the correct CG!
making aditional weight usefull!
after few flights, i will take it off and replace it by an altimeter....!




Thanks
Nov 25, 2009, 06:26 PM
Physics hate's my ideas
GreenAce92's Avatar
How thick is the wing? And it is supposed to be a fully capable bird?
Looks like a very nice model, watched a promo video of it, launches high!
Nov 25, 2009, 10:00 PM
It's a mere flesh wound!
Buddy Roos's Avatar
Quote:
Originally Posted by lebenj
yes, rotary drive could be a solution. but i'm not even sure that it would be entire inside the wing in the RDS position.
and RDS looks really harder to build.... but for sure better and more beautiful.

does someone know where to buy small D47 RDS systems?

Thanks
RC Builder has the D47 RDS systems.
http://www.rcbuilder.com/Merchant2/m...tegory_Code=AC

Buddy
Nov 26, 2009, 03:10 AM
flying is not a dream
lebenj's Avatar
thanks for the link, but a little bit expensive for a binary 900!

do you no the weight of this kind of stuff???

just have to make a connector for my 2 ailerons servos wires and glue the servos into the wing!

maybe the first flight is for this week end!!!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Peak-Hobby Binary-III DLG Building Thread Kai@UCSB Hand Launch 141 Aug 26, 2011 02:58 AM
Discussion Peak Hobby Binary II Wave Glider Hand Launch 1 Jan 10, 2009 06:48 PM
Cool My Visit to Peak Hobby - Home of the Binary-900 imack Hand Launch 10 Dec 17, 2008 07:02 PM
Hobby Lobby BD5 Build? saint152 Sport Planes 15 Aug 11, 2003 08:59 PM