Thread Tools
Old Jan 04, 2009, 05:37 PM
robin55 is offline
Find More Posts by robin55
Registered User
Discussion

Turborix 2.4 GHz radio


I have bought this cheap radio to give a try at 2.4 GHz system:
Turborix 2.4G 6 Channel Digital Proportional Radio Gear
Model Number : rcps61206_61411

Today I have given it a try and really had no kind of interference (while with my Graupner MC17 I got some), my problem is the mixing of the channels that seems not to work properly, the response of mixed servos is sluggish and the throw is shorter than normal.
Does anybody have the same gear? Any suggestion (excluding to throw it away)?
Sign up now
to remove ads between posts
Old Jan 05, 2009, 07:48 PM
abbydawn is offline
Find More Posts by abbydawn
Registered User

Turborix 2.4G 6 Channel Digital Proportional Radio


Quote:
Originally Posted by robin55
I have bought this cheap radio to give a try at 2.4 GHz system:
Turborix 2.4G 6 Channel Digital Proportional Radio Gear
Model Number : rcps61206_61411

Today I have given it a try and really had no kind of interference (while with my Graupner MC17 I got some), my problem is the mixing of the channels that seems not to work properly, the response of mixed servos is sluggish and the throw is shorter than normal.
Does anybody have the same gear? Any suggestion (excluding to throw it away)?
Go to this thread:

http://www.rcuniverse.com/forum/m_8142605/tm.htm

I have the same ID there.
Old Jan 06, 2009, 05:50 AM
robin55 is offline
Find More Posts by robin55
Registered User
Thanks!
Very useful address, now trying...
Old Jan 06, 2009, 06:26 AM
robin55 is offline
Find More Posts by robin55
Registered User
I give it a try and I was able to obtain the desired trimming and movement: my configuration has a servo for each aileron mixing channel 1 and 5 for correct movement.
Unluckly the aileron trim (I have mode 1 aileron on right stick) gives a not regular response meaning that moving the lever from left to right gives not the same movement on ailerons, instead I obtain an unpredictable glimpsing of the surfaces!
Other from this the trims works perfectly, is this a hardware Tx or software fault?
Last edited by robin55; Jan 06, 2009 at 06:31 AM.
Old Jan 06, 2009, 01:43 PM
miniGranis is offline
Find More Posts by miniGranis
Registered User
Hi all, I am a real newbie to anything more then a 2 channel radio so please bear with me, I am looking for a 4 channel (or more) radio for my Kyosho Blizzard (to control a plow and other things).


(Not my Blizzard but a similar one)

Now, does anyone know if the Turborix left stick can be made self centering ?
Perhaps by moving springs from the right stick ? (AFAIK that seems to be the a common solution).


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article E-flite Blade CX2 All-in-One with Spektrum 2.4 GHz Radio System Review Michael Heer Coaxial Helicopters 128 Jul 31, 2011 09:52 AM
Discussion 2.4Ghz camera would kill all 2.4 Ghz radio system? shschon Radios 47 Oct 03, 2007 05:59 PM
Discussion 2.4 gHz radio system rumors at the 2007 AMA Convention Thomas B Radios 62 Feb 05, 2007 03:33 PM
Discussion Spektrum DX6 2.4 GHz Radio for AP? jimsky Aerial Photography 19 Oct 08, 2006 07:12 AM