Maidened,maidened,and half a maiden - RC Groups
Thread Tools
This thread is privately moderated by Cruzsin, who may elect to delete unwanted replies.
Jan 03, 2009, 11:54 AM
Registered User
Cruzsin's Avatar

Maidened,maidened,and half a maiden

After a Thursday and Friday flying,I achieved a few "to do" chores.

First,I finally got a chance to maiden my little t tail after the rebuild.With the extra 1/2 pound from the repairs,she flew faster,and still handled well.Chore one done

Secondly,I flew my CR Raider with the 1 pound steel joiner,and the weight made a huge difference in good lift.Now,I remember why I like the RG 15 airfoil so much.It handles weight well.Now for the repaint before I post pictures.
Chore 2,1/2 done.

Thirdly,I picked up a Hades,version 1, 2 weeks ago in a package deal for cheap(really cheap).The plane had been repaired numerous times by the previous owner.When I received it,one wing tip was crunched,the other was open like a clam shell.The nose cone was a tough fit due to the inner cone being repaired upteen times.
Carbon fiber,glass,laminating epoxy,and lots of bondo later.I was ready for paint.You'll notice in the photo,there are still 2 spots that need a repaint on the center section of the wing.I'll get to that soon.
Anyway,she weighs about 8 and 1/2 pds dry(no ballast,weight is from the repairs),but I figured with a 2.8 meter span,it would be ok.
I'm very happy with the flight results.Nice flying speedy plane.Chore 3 done

P.S. The Hades is a great replacement for my lost Dogan.

Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
half pipe maidened southern soarer uk Slope 6 Jun 10, 2005 07:55 PM
Half pipe maiden southern soarer uk Slope 2 Jun 09, 2005 12:04 PM