http://www.valuehobby.com/products.php?category_id=4

To continue the 35" series Profiles we now have the 35" sabre avalible!
here is the link to the cap35 from www.valuehobby.com
https://www.rcgroups.com/forums/showthread.php?t=901337

Specs
weight, ready to fly 18-21oz

my setup pictured
Gforce Lipo 1600mAh 3s1p (I also use the Gforce 1300mAh 3s1p) ballances well with either (4-5oz lipo)
Motor G400 1200kV outrunner
Prop EP 10x6 GWS
ESC 25amp valuehobby.com
Servos HS-56HB (also like the HS-65HB)
RX 617 fasst (any 5channel will do, 2 aileron servos)

no manual at this time, i'm working on it but it's really straitforward
Here are some pics, which says most of it all
thanks
spaz

Great pics. Mine should be on the way soon.

Happy New Year

I'm really starting to dislike you Spaz,.... My wife feels the same way.


I've flown Ozzy,... Errr TimB's Oldschool Sabre and had a bunch of fun with it, Now you go and post all these really sexy pics of the new one!........ I have a motor laying around,.... and ESC and receiver! GRRRRRRRR!


Must resist,.... Must resist!

Dooo it, Dooo it, Dooo it Go ahead press the "pay now" button.

Originally Posted by kwj48

Dooo it, Dooo it, Dooo it Go ahead press the "pay now" button.

yeah, you've gone and done it. need to acquire me one now...

Mine showed up today. It looks great. Now I'm just wait'n on my servos n stuff.

Excuse me sir but I'd like to know if it will 3d almost as good as a Twist?

I haven't even started on the cap, the 2 Accel bipes and the Sabre 47 so no I can't get one right now.

Looks good there Spaz.

Originally Posted by Wulf_Flieger

Excuse me sir but I'd like to know if it will 3d almost as good as a Twist?

I haven't even started on the cap, the 2 Accel bipes and the Sabre 47 so no I can't get one right now.

Looks good there Spaz.

you probably have a twist too but that's ok, twists are like gateway drugs i'm feinding to fly mine, but i hate this cold snap.. i dont fly unless it's over 32degF.. which almost rules out all of winter here
Lucky for me i got the proto about 6months ago and gave it a good thrashing

That 47" looks nice, will have to condider buying one for an electric set-up.

Challenger413

the new cap flys great,, so should the sabre 35.


i'm going lectric on the new 47" sabre, i'll post results when i'm done.

Thanks guys here is the manual for the sabre47

here are some pics from a 40 size e-convertion i did.. the setup is now on a yak55m profile i scratched out

the 40 size cap is at the half way point.. the first one is a kit build sabre47 with hobbycity 6s1p setup ~1400watts on it

40 size 3D E-power cheap (5 min 34 sec)

Hey Spaz, that yak55 is your design right? Any chance of it getting arfed?

I had a midair with my Twist 2 years ago which was the best thing that coulda happened to that pos. Got an OMP Edge V3 and never looked back.

Spaz, you need to move. Every video it looks like its 20 degrees and ready to snow any second. Come out to Colorado here you'd love it. More sunny days then Florida and best skiing in the country.


Im totally confused. Which plane is the red,blue,yellow and white one in the 2nd part of the video? Love the look of that one.

Thanks

Originally Posted by Wulf_Flieger

Im totally confused. Which plane is the red,blue,yellow and white one in the 2nd part of the video? Love the look of that one.

Thanks

That's the 40-sized Cap.