Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 28, 2009, 11:55 AM
poring is offline
Find More Posts by poring
Registered User
poring's Avatar
Do you have a 10*4.7 to try?
Sign up now
to remove ads between posts
Old Feb 28, 2009, 02:31 PM
Wulf_Flieger is offline
Find More Posts by Wulf_Flieger
ProBro Wulf
Wulf_Flieger's Avatar
You should be getting 190 to 200 watts on that motor. Prop is too small. prop up to an apc 10x4.7 sf or better yet a gws HD 11x7.

What is your battery voltage dropping down to at full throttle? If it's dropping below 10 to 10. 5 volts and its fully charged the battery is toast or not rated at a big enough c rating. 12000 you want 20c burst for that motor.

Hope you get it figured out.

Spaz, whats all that white stuff out there?
Old Feb 28, 2009, 03:58 PM
3dRookie is offline
Find More Posts by 3dRookie
ProBro 3dRookie ;)
3dRookie's Avatar
Quote:
Originally Posted by GassPasser
just got mine set-up and looks like i have problems whats wrong here ?
set-up 450 e-flight motor
25 amp esc
1250 mah li-po
10.38 apc slow-fly prop
my Medusa Analizer readings, are 100 watts and about 13amps @ WOT
it takes almost full throttle to hover. im am topping off may battery now to see if that helps but i think i have a good charge in it. any suggestions?

More prop.
Old Feb 28, 2009, 07:08 PM
spastic is offline
Find More Posts by spastic
ProBro Spaz
spastic's Avatar
Quote:
Originally Posted by Wulf_Flieger

Spaz, whats all that white stuff out there?

no snow left in Buffalo, that was in Albany, Syracuse has even more
Old Mar 01, 2009, 07:54 AM
blunight is offline
Find More Posts by blunight
Chess club geek with wings
blunight's Avatar
Spaz,
Wow, nice flying…first time I’ve seen a wing touch on a building!
Trent
Old Mar 01, 2009, 05:05 PM
zaksdad is offline
Find More Posts by zaksdad
zaksdad
Waiting on a new dx6i to get here not to mention getting my other one back from Horizon, could of gotten my fm system back out but.... I'll wait.
Old Apr 02, 2009, 11:59 PM
spastic is offline
Find More Posts by spastic
ProBro Spaz
spastic's Avatar
check out the 85" E powered 3200watt 12s1p 5000mAh (hobby city stuff) Sabre a flying buddy and me did. i'm going to be doing a 10s1p 80" yak55m for a fun summer project

SumoSabre85 (4 min 10 sec)
Old Apr 03, 2009, 12:07 AM
3dRookie is offline
Find More Posts by 3dRookie
ProBro 3dRookie ;)
3dRookie's Avatar
Nice birdy!


Got any other vids?
Old Apr 03, 2009, 12:09 AM
theKM is offline
Find More Posts by theKM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by spastic
check out the 85" E powered 3200watt 12s1p 5000mAh (hobby city stuff) Sabre a flying buddy and me did. i'm going to be doing a 10s1p 80" yak55m for a fun summer project

http://www.youtube.com/watch?v=RIyxmZI9tfE
now that looks fun!... it going to be at NEAT?
RCG Plus Member
Latest blog entry: Updated Hatcam - Apr2016
Old Apr 03, 2009, 02:49 PM
Wulf_Flieger is offline
Find More Posts by Wulf_Flieger
ProBro Wulf
Wulf_Flieger's Avatar
Looks good there Spaz. Now get busy on those 60 size Sabre arfs.

Andy did a good ole Andy landing on his Sabre47 at Hobro on the second flight! Modified the canopy real good.
Old Apr 20, 2009, 07:18 PM
spastic is offline
Find More Posts by spastic
ProBro Spaz
spastic's Avatar
Quote:
Originally Posted by Wulf_Flieger
Looks good there Spaz. Now get busy on those 60 size Sabre arfs.

Andy did a good ole Andy landing on his Sabre47 at Hobro on the second flight! Modified the canopy real good.

great now he can buy another

BTW Alex just got 9gram emax servos for $5 each! (not on the site yet) i've been flying them on a 22oz cap35 with 300watts and they are holding up great, very smooth and 20+oz torque.. actually center too
Old Apr 20, 2009, 08:06 PM
theKM is offline
Find More Posts by theKM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by spastic
...actually center too
bonus!
RCG Plus Member
Latest blog entry: Updated Hatcam - Apr2016
Old Apr 20, 2009, 08:20 PM
spastic is offline
Find More Posts by spastic
ProBro Spaz
spastic's Avatar
Quote:
Originally Posted by theKM
bonus!

LOL, hey KM wish we could have hanged out at toledo we were Rocken on saturday.. or was it friday? anyway, stayed out late every night with Billyhell and Mr. Burke had a good time
Old Apr 20, 2009, 08:57 PM
theKM is offline
Find More Posts by theKM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by spastic
LOL, hey KM wish we could have hanged out at toledo we were Rocken on saturday.. or was it friday? anyway, stayed out late every night with Billyhell and Mr. Burke had a good time
Nice! ...apparently I should have hung out with you, I have to chat with those guys about some RCG stuff but couldn't find 'em.
RCG Plus Member
Latest blog entry: Updated Hatcam - Apr2016
Old Apr 20, 2009, 09:05 PM
spastic is offline
Find More Posts by spastic
ProBro Spaz
spastic's Avatar
yep next time


Thread Tools