HK 450 : hard to be cheaper for a 450 - Page 1090 - RC Groups
Thread Tools
Sep 19, 2010, 12:10 AM
Yes, I know it's upside down.
Quote:
Originally Posted by sandos
What would cause massive amounts of wag in rate mode, but not HH mode?
Weird, I have the exact opposite problem. Wagging in HH, but not in Rate. Although for me the wag is only when I pick up speed in a dive, such as in the downline run after a stall turn.
Sign up now
to remove ads between posts
Sep 19, 2010, 07:05 AM
AMA# BR549
rikybob's Avatar
There may be something that you haven't considered.

Have you tried the duckweight?

b
Sep 19, 2010, 08:10 AM
Registered User
vinay2070's Avatar
Quote:
Originally Posted by Harrow
Weird, I have the exact opposite problem. Wagging in HH, but not in Rate. Although for me the wag is only when I pick up speed in a dive, such as in the downline run after a stall turn.
Check the vibrations where the gyro is mounted.
Sep 19, 2010, 12:08 PM
Registered User
Quote:
Originally Posted by rikybob
There may be something that you haven't considered.

Have you tried the duckweight?

b
Uh, what is that? Same thing as, or related to chinese weight mod? I do have "extra long" screws through the blades, I thought it should atleast even it out a bit.
Sep 19, 2010, 12:19 PM
AMA# BR549
rikybob's Avatar
Quote:
Originally Posted by sandos
Uh, what is that? Same thing as, or related to chinese weight mod? I do have "extra long" screws through the blades, I thought it should atleast even it out a bit.

Check Friday the 1st. I love that old bit from the Three Stooges.

Sorry!

b

(Crickets)

oh well
Last edited by rikybob; Sep 20, 2010 at 07:13 AM.
Sep 20, 2010, 06:03 AM
Yes, I know it's upside down.
Quote:
Originally Posted by vinay2070
Check the vibrations where the gyro is mounted.
Hmm, is it possible to have TOO much foam. I put three layers. And why only in HH. ??
Sep 20, 2010, 06:50 AM
Sippin the Koolaid!
losifanatic's Avatar
Yeah you can have to much . Play around with it and see if that helps
Sep 21, 2010, 05:40 PM
master of the universe
captaingeek's Avatar
im working on a scale md500 http://www.hobbyking.com/hobbycity/s...dProduct=10111 build. has anyone else done this build? running a turnigy typhoon 3550 motor. im going to adjust the throttle and pitch curves for scale flying.
Sep 22, 2010, 03:46 AM
Registered User
is there such thing as hands off hover for 450 sized helis ?
Sep 22, 2010, 03:53 AM
Retired
pitchp's Avatar
it can and it has been done, on a still day, with the right set up.
Sep 22, 2010, 04:01 AM
Registered User
It would likely help with a flybarless system, but it will not give unlimited stability. Otoh, neither does any other size helicopter without a stabilization system? Its just a matter of timescale, a 700 might be a more stable than a 450, but still not inherently stable.
Sep 22, 2010, 05:10 AM
Retired
pitchp's Avatar
Well I have the 4#3b, and the 4g3, and I have finally modified both of them that they almost hover like my bmcx. almost 8 seconds with out stick input. Now they are both small birds, with suicidal tendencies. Now that I have modified them, it's as if they are on prozac.

Oh and wade1 it will take months to dial in such a bird. I'm assuming you just started in the hobby? Everything must be set precisely. But doing that can be meticulous, but it pays off though. You get more time learning how to fly, rather than trying to get your bird to do what it's supposed to do..
Sep 22, 2010, 05:15 AM
Registered User
I've managed maybe 5 seconds tops on my 450, but that was actually before I had a swash leveler
Sep 22, 2010, 05:37 AM
Retired
pitchp's Avatar
Quote:
Originally Posted by sandos
I've managed maybe 5 seconds tops on my 450, but that was actually before I had a swash leveler
That's really good for an HK 450. Is that the plastic version? Did you modify any thing? atm I'm trying to get my hk250 to behave it's tail. The gyro is really cheap and nasty, it's got this twitching condition. Hey is it me or do you think I have a bent feathering shaft on my hk450 plastic version? It's one of the very first one that came out.
Sep 22, 2010, 05:38 AM
Registered User
I am fairly new to 450s and having trouble holding a steady hover. I am always having to hold elevator stick down a bit and a bit of right cyclic. but whe cog seems pretty good when I hold it by the fly bar.

Also, what would cause the tail to slightly jerk a bit ? just randomly the tail looks like it jerks a small amount. nothing major. could gusts of wind cause this ?



Quote:
Originally Posted by pitchp
Well I have the 4#3b, and the 4g3, and I have finally modified both of them that they almost hover like my bmcx. almost 8 seconds with out stick input. Now they are both small birds, with suicidal tendencies. Now that I have modified them, it's as if they are on prozac.

Oh and wade1 it will take months to dial in such a bird. I'm assuming you just started in the hobby? Everything must be set precisely. But doing that can be meticulous, but it pays off though. You get more time learning how to fly, rather than trying to get your bird to do what it's supposed to do..


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Zagi-Flash5x-EPA have to be same for aileron and elevators Balin Foamies (Kits) 2 Sep 10, 2001 09:04 PM
Will CP 1300 cells be ok for this? Steve H. Power Systems 15 Jul 17, 2001 10:01 AM
Home for a 450 Turbo dezflyer Electric Plane Talk 6 May 31, 2001 02:04 AM
Will the new CP1300's be suitable for this? Slope Nut Power Systems 3 May 21, 2001 03:19 PM
Soarstar what mods. need to be done for a succesful flight? JEWINE Foamies (Kits) 10 May 06, 2001 09:36 PM