Thread Tools
Apr 02, 2009, 09:38 AM
Registered User
Mike Smart's Avatar
Quote:
Originally Posted by takiss
190 g withought LiPo?
No 196 gms with Lipo...

Hacker A10-9L
GWS 8 x 4.3 SF prop
CC Phoenix 10 ESC
Futaba R6004FF 2.4 GHz receiver
3No 5gm servos
Evolite 350 2s lipo

Mike
Sign up now
to remove ads between posts
Apr 02, 2009, 01:15 PM
Burb
burb's Avatar

Batteries, etc


Ok
I maidened this morning with 3s 750 rhino and 12 a esc
Flew great outdoors and the motor came down just slightly warm ...
Flew for about 9 minutes

Ohhh ,,, it was only 31degrees here this morning .. maybe thats why the motor did not get hot .

In the meantime I ordered a few Rhino 2s 750 ..... so now I will have both

any other opinions

Kept moving the battery back from the stated cob and never found the threshold of pain ... will keep adjusting

anyone have a new measurment
Apr 02, 2009, 05:43 PM
Fly Low Fly Fast
Draven's Avatar
I have a spring scale and it said 184g with lipo, i just ordered a digital scale. Just to make sure.

Stock motor, 3X HXT 5 gram servos, custom 2s 610mah, 10amp Pheonix esc, removed case from receiver, and esc. used Hot Glue as my glue.
Last edited by Draven; Apr 02, 2009 at 08:20 PM.
Apr 02, 2009, 11:17 PM
Registered User
I just finished my Piaget, with Futaba S3114 and Waypoint servos and Axi 2204/54 motor on 2S LiPo. i funally took out differential. 180g withought LiPo (yes I know I lost the weight prize).
It flies very well. Thanks for informing me about this plane.
Takis Katsoris
Apr 02, 2009, 11:54 PM
Some.. call him Tim...
Ducati Mechanic's Avatar
do you still have to get these from hobbycity? Do theay sell them in the states yet?
Apr 03, 2009, 08:07 AM
KF4IVP
34Ford's Avatar
This is what happens when you have multiple threads about the same dang plane.

moody152 Desire-Hobby-RC over on the other thread, sells them on Ebay here in the US.

https://www.rcgroups.com/forums/show...=960210&page=7



______
Dennis
Apr 03, 2009, 07:51 PM
Burb
burb's Avatar

hobbyking motor


anyone have a suggestion on a replacement motor from hobby king ??
Apr 03, 2009, 07:53 PM
Fly Low Fly Fast
Draven's Avatar
24 gram Blue wonder motor, 1500kv
Apr 03, 2009, 08:25 PM
EP 3D Flyer
feda's Avatar
Quote:
Originally Posted by burb
anyone have a suggestion on a replacement motor from hobby king ??
I am building mine with a DualSky XM2822-24, 1450RPM/V, 30 grams in weight. With a 2S battery pack, I can get up to 340-gram thrust. My AUW target for this plane is around 230 grams.
Apr 04, 2009, 02:23 PM
Registered User
Hi,

Just beginning the build process and I've gotten to step #2, glue the carbon fiber strips to the wing.

In my package I have two long carbon fiber strips. Each is the perfect length to glue to the trailing edge of the wing. Which, to me implies that that is where at least one of them should go.

Yet, from the photos I can see of other people's builds they have put at least one of the carbon fiber strips in the slit which is cut towards the rear of the wing. And not at all glued to the wing's trailing edge.

Unfortunately, neither of my long carbon fiber strips will fit in the slit which is pre-cut.

- Am I supposed to shorten the carbon fiber strip to make if fit into the slit?
- Or, am I supposed to glue the strip to the trailing edge of the wing where it is the perfect length already?
- Or, am I just missing something altogether?

Also, the two leading edges of the wing are supposed to have carbon fiber strips glued in them. That's obvious enough, but which strips again? None of the strips in my package seem to be the right length. Do I use two smaller strips per side of the leading edge of the wing?

These aircraft kits always seem to make me feel like an idiot. Maybe I should take some really detailed photos of my build so I can help the next person....
Apr 04, 2009, 02:25 PM
Fly Low Fly Fast
Draven's Avatar
Shorten it, non of the Carbon strips and rods are to length. Except the nose strips, they fit perfectly, and the tail strip.
Apr 04, 2009, 08:42 PM
EP 3D Flyer
feda's Avatar
Quote:
Originally Posted by oyahhh
Hi,

Just beginning the build process and I've gotten to step #2, glue the carbon fiber strips to the wing.

In my package I have two long carbon fiber strips. Each is the perfect length to glue to the trailing edge of the wing. Which, to me implies that that is where at least one of them should go.

Yet, from the photos I can see of other people's builds they have put at least one of the carbon fiber strips in the slit which is cut towards the rear of the wing. And not at all glued to the wing's trailing edge.

Unfortunately, neither of my long carbon fiber strips will fit in the slit which is pre-cut.

- Am I supposed to shorten the carbon fiber strip to make if fit into the slit?
- Or, am I supposed to glue the strip to the trailing edge of the wing where it is the perfect length already?
- Or, am I just missing something altogether?

Also, the two leading edges of the wing are supposed to have carbon fiber strips glued in them. That's obvious enough, but which strips again? None of the strips in my package seem to be the right length. Do I use two smaller strips per side of the leading edge of the wing?

These aircraft kits always seem to make me feel like an idiot. Maybe I should take some really detailed photos of my build so I can help the next person....
My understanding is that the 2 long strips are meant for the main wing. One is for the rear part of the wing; the other one should be cut into 2 pieces to be glued to the left leading edge and the right leading edge respectively.
Apr 04, 2009, 08:53 PM
Registered User
Thank you planelover93 and feda!
Apr 05, 2009, 01:22 AM
Burb
burb's Avatar

Business side shot


Here is a shot of the bottom with the rods all installed ..... wish I had one when I did mine
Apr 05, 2009, 02:35 PM
Some.. call him Tim...
Ducati Mechanic's Avatar
I might start selling techone planes. minimum order is 10 of one model, but theay are willing to start me at 5. I want to get a few different planes to start out with. Which are your guys favorites? besides the piaget.


Thread Tools