New to UAVs need your input please help - RC Groups
Thread Tools
Dec 10, 2008, 02:58 AM
Registered User

New to UAVs need your input please help

I'm starting to build a UAV for my senior seminar project and I need your guys' input to help me graduate. I am completely new at this and I am really cramped on time

I've ordered this UAV

With this ESC

Now, I need a motor, tx and rx, servos, and FMA copilot

First up, the website recommends this motor

But they are out of stock, so I was wondering if this motor will be a good substitute

Next I need a tx and rx so I was wondering if this rx

would work with this tx**&P=0

and if they do, which air frequency would I order? The channels range from 11 to 60

next, the site recommends 9g mirco servos, will these servos work since they don't have 9g servos?

Flying is not an important issue right now, what I absolutely need to know is if the tx and rx will work together and will the motor and servos serve as a good substitute to the site's recommended parts

thank you again
Sign up now
to remove ads between posts
Dec 10, 2008, 07:23 AM
Its all fun
Tonystott's Avatar
If you get all that, you still won't have a UAV. You will have a radio-controlled aircraft, but it won't fly itself. You do realise that don't you?
Dec 10, 2008, 08:49 AM
Registered User
Andy W's Avatar
Also, if you do plan on building a UAV, I suggest you post in the UAV forum:
Dec 10, 2008, 09:37 AM
SlowStick Test Pilot
patrickegan's Avatar

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Predator Twin, Need your input, please read slowflyer Foamies (Kits) 64 Jul 14, 2013 07:29 AM
Poll New balancing method, need your input. jason_ices Batteries and Chargers 21 Aug 06, 2006 09:52 PM
New jet coming soon--need your input hawaii50 Fuel Jet Talk 2 Nov 15, 2003 12:02 PM
new foamie recommendation - need your help fdisker Foamies (Kits) 3 Aug 20, 2002 10:45 PM
Zagi/wing pilots, I need your input please slowflyer Foamies (Kits) 19 Dec 16, 2001 04:50 AM