GWS MT-1: the Multi-Tester - RC Groups
Thread Tools
Dec 09, 2008, 08:38 PM
FAA Commercial Pilot
Discussion

GWS MT-1: the Multi-Tester







A more advanced tester for servos and rotating propeller.
MT-1 (GWRMT001) is the newly designed/made multi-tester.
It comes with more advanced functions than what on the old Servo Tester.

Size: 140 x 70 x 20mm ( 5.51 x 2.76 x 0.79" )
Weight: 110g / 3.89 oz (Batteries not included)

You Need One, Believe GWS
Last edited by gws shaqchang; Dec 10, 2008 at 02:12 AM.
Sign up now
to remove ads between posts
Dec 18, 2008, 03:11 AM
FAA Commercial Pilot
Quote:
Originally Posted by gws shaqchang





A more advanced tester for servos and rotating propeller.
MT-1 (GWRMT001) is the newly designed/made multi-tester.
It comes with more advanced functions than what on the old Servo Tester.

Size: 140 x 70 x 20mm ( 5.51 x 2.76 x 0.79" )
Weight: 110g / 3.89 oz (Batteries not included)

You Need One, Believe GWS
Anyone share to us about the availability on MT-1......???
Dec 22, 2008, 08:08 PM
FAA Commercial Pilot

Balwin Park, CA....close to Ontario Airport


GWS CEO, Mr. Lin, shared the GWS MT-01 to flyers yesterday afternoon at Balwin Park, CA.

The flyers were all shocked that GWS MT-01 is multi-functional and reasonable price.
Dec 22, 2008, 10:34 PM
Registered User
its suggested retail price in USA is US$30 currently.

Chen
Dec 26, 2008, 06:45 PM
Houng-wen Lin
GWS4CEO's Avatar
Quote:
Originally Posted by GWS CHEN
its suggested retail price in USA is US$30 currently.

Chen
After a few months promotion, the price will be going back to about $40.

Get one as early as possible before promotion ended!

Check: www.caliberhobby.com
Dec 28, 2008, 01:43 PM
Houng-wen Lin
GWS4CEO's Avatar
http://www.gwsus.com/english/product...cuit/mt-01.htm

ITEM:GWRMT001

MT-1, the Multi-Tester: A more advanced tester for servos and rotating propeller.
MT-1 (GWRMT001) is the newly designed/made multi-tester. It comes with more advanced functions than what on the old Servo Tester.

Size: 140 x 70 x 20mm ( 5.51 x 2.76 x 0.79" )
Weight: 110g / 3.89 oz (Batteries not included)

Functions and applications:

◆To measure the Pulse Width transmitted by Transmitter for up to 9 channels.
◆To measure the Pulse Width sent from Receiver.
◆To test the rotations of Servo automatically at the pulse widths of top, medium and low points set by user already.
◆To test the automatic rotations of Servo.
◆To test the rotations of Servo by turning the knob on the tester manually .
◆To test the sensitivity of Servo (1μS per step minimum).
◆To measure RPM of a spinning propeller for 2 6 blades ones, real time RPM value shown/to set the peak RPM value up to 99990 per minute.
◆Shiny 4 digits red LED's to display the values measured.
◆Power source can be from UM-4 / AAA cell x4, or an adapter with 7-15V or BEC (5V) from an ESC.
◆An output port for applying Positive/Negative signals of Pulse Width from this tester.
◆Four buttons for setting up functions and modes.
Dec 28, 2008, 01:45 PM
Houng-wen Lin
GWS4CEO's Avatar
After a few months promotion MT-1 at $30, will be back to regular $40 soon.

Don't miss this great little instrument for accurate tune up your models.
Jan 07, 2009, 05:48 PM
Houng-wen Lin
GWS4CEO's Avatar
We will show you this unit at AMA show!

Come and take a look!
Jan 31, 2009, 11:51 PM
Suspended Account
Alright, I finally got one.

Now, how do I automatically center a servo?
Feb 01, 2009, 10:32 AM
Registered User
hymyankel,

Be sure to adjust PWM value into 1500 for the center of the servo by following the steps of the manual.

Chen
Feb 01, 2009, 12:41 PM
Suspended Account
Got it-thanks-very nice little device!
Feb 01, 2009, 03:17 PM
Registered User
I made a PDF-Version of the documentation.
Great product, very versatile...
Feb 01, 2009, 04:02 PM
Suspended Account
It's a very nice device, but, the problem for me is that the instructions appear to presume a certain basic understanding of servo design specifications-I guess I'll get there now!
Feb 02, 2009, 11:00 PM
Registered User
Hi FreeStyle07,

Thank you for posting the manual in PDF one here. This makes it easier to view. Also thank you for your words, it's a very good device indeed for most of flyers and robot lovers.

Hi Hymyankel,

Thank you for your words, most of users will learn more about servo after using this versatile device indeed.

Chen
Feb 02, 2009, 11:26 PM
Suspended Account
I tried the tachometer, today, with mixed results.

Very likely, I must learn to use it but it seems the little plastic cap on the sensor must be set "just so," and mine seems to read rpm's even when the prop is stationary.

I'll keep trying!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Gws Mt-1綜合測試器 GWS4CEO Taiwan 2 Dec 13, 2009 02:10 PM
Discussion GWS MT-1 RC Multi Tester GWS4CEO GWS (Grand Wing Servo) 21 Nov 19, 2007 05:59 PM
GWS props $1.20 each scmodchips Aircraft - Electric - Airplanes (FS/W) 2 Jun 23, 2003 05:11 PM
GWS 3:1 drive - anybody used it? Matthew Allen Parkflyers 3 Mar 19, 2002 12:24 PM