who makes slow fly pusher props? - RC Groups
Thread Tools
Jun 08, 2001, 05:19 PM
Gravity sucks.
mrittinger's Avatar
OOOOH, tough one! I have been upset by this for a while!
I build a lot of twins, and wish APC would make left hand Speed 400 props.They do fly fine with two right hands, but you have the right idea...maybe we ought to push APC a bit,huh?

MR
Sign up now
to remove ads between posts
Jun 09, 2001, 12:05 AM
Registered User
JTinCT's Avatar
If you won't exceed the specified RPM you can use the ARC prop from Anything RC http://www.slow-flyer.com/ JT
Jun 09, 2001, 12:36 AM
Old Timer
California Condor's Avatar
I was at APC Tuesday and Fred was setting up a 7x4E pusher prop. Eut

Quote:
Originally posted by tickettothemoon:
Im building a model wich will require contrarotating props. I need props of about 8-9 inches diameter by 4-6 inches pitch. What I really need is a pusher version of the apc 9x4.3 slow fly prop. If any 1 has any info regarding availability of this type of prop please post here or email me. rccarsplanes4sal@aol.com

Thanks!
Jun 09, 2001, 01:04 AM
Registered User

who makes slow fly pusher props?


Im building a model wich will require contrarotating props. I need props of about 8-9 inches diameter by 4-6 inches pitch. What I really need is a pusher version of the apc 9x4.3 slow fly prop. If any 1 has any info regarding availability of this type of prop please post here or email me. rccarsplanes4sal@aol.com

Thanks!
Jun 09, 2001, 09:05 AM
Registered User
Hey folks thanks much! I just checked out the arc props,, not husky enough for a screaming geared 300. Im hoping apc introduces this 7x4 eprop soon, with a tractor version of the same size too. Any other suggestions? mrittinger, I think we should puch apc to make these. Its especially important with twins that use the big slow fly props.