New Products Flash Sale
Thread Tools
Old Dec 03, 2008, 11:59 AM
ramovan is online now
Find More Posts by ramovan
ramovan's Avatar
Quote:
Originally Posted by NipponDave
We will hav option 2S-to-7S adapters for 0720i, with same types (HP, EH, XH, TP/FP) as available currently for 2S-6S.

Will also have the 8-pin HP taps, so you could use our tap on your pack native if you like.
Dave,

Does this mean the current 2S-6S connectors are not going to be compatible with the 0720i? Are we going to have to stock 2S-6S connectors and 2S-7S connectors now? It's nice to have adapters that fit all the Hyperion chargers and balancers right now. Sounds like now we're going to have another set of multi-adapters that only fit the 0720i.
Site Sponsor
Sign up now
to remove ads between posts
Old Dec 03, 2008, 06:51 PM
reptileman is online now
Find More Posts by reptileman
Registered User
V1.9 installed in Inet charger why does the charge amp rate go up and down .4 of a amp if set to .8 amps it goes to .84amps?
Old Dec 03, 2008, 07:45 PM
kgfly is offline
Find More Posts by kgfly
Registered User
Do you mean "up and down by 0.04A" ? If so that is 0.5% variation and is simply reflecting the tolerances in the device. A difference of +/- 40mA won't matter in the least when charging at a nominal 8A (= 8000mA).
Old Dec 03, 2008, 09:04 PM
reptileman is online now
Find More Posts by reptileman
Registered User
Hi i am charging at 800MAH and it goes up and down from 800MAH to 840MAH?
Another thing i noticed on the last version update is when looking at the balence mode in the creen that shows all the cells voltages seperatly it no longer flashes the little circle by the cells voltage that is being discharged by the charger while balencing??/

One great thing i noticed over the last version update is with the new version the chargers fan don't keep going on and off for no reason like in 1.7v
Last edited by reptileman; Dec 03, 2008 at 09:38 PM.
Old Dec 04, 2008, 11:48 AM
Dragonfueled is offline
Find More Posts by Dragonfueled
Registered User
I cant figure out the change for the channel button in the 1.9 duo firmware update. It seems to work the same way it did before? In the addendum it says it takes you to the corresponding screen when you hit the channel button. Mine just takes me back to whatever screen I was using when I was on the other chasnnel.
Old Dec 04, 2008, 08:43 PM
meronr is offline
Find More Posts by meronr
One bad mama jama
Hey Dave I am a newbie to the duo charger, having a prob sent you a pm...Look forward to you hopefully helping me out.

_Meron_
Old Dec 04, 2008, 09:59 PM
meronr is offline
Find More Posts by meronr
One bad mama jama
Maybe someone else can help me with my dilemma...I have been trying to charge my glow ignitors. One is a one cell 5000mah nicd battery and the other is a 1 cell 4400mah nimh battery, when I charge these batteries at 1c the voltage reads at over 2.0 volts and than the charger stops charging and gives an error message that says output voltage too high..The only way that i have been able to charge these batteries is to charge them .5c or lower....PLEASE SOMEONE HELP ME
Old Dec 04, 2008, 10:38 PM
reptileman is online now
Find More Posts by reptileman
Registered User
Quote:
Originally Posted by meronr
Maybe someone else can help me with my dilemma...I have been trying to charge my glow ignitors. One is a one cell 5000mah nicd battery and the other is a 1 cell 4400mah nimh battery, when I charge these batteries at 1c the voltage reads at over 2.0 volts and than the charger stops charging and gives an error message that says output voltage too high..The only way that i have been able to charge these batteries is to charge them .5c or lower....PLEASE SOMEONE HELP ME
Hi i don't think you supposed to charge 1 cell glow ignitors over 1 amp... 1C on one cell 4400mah i belive 4.5 amps would be way to hight of a rate for one cell and would cause damage to it.
Old Dec 05, 2008, 12:23 AM
NipponDave is offline
Find More Posts by NipponDave
http://www.aircraft-world
NipponDave's Avatar
Quote:
Originally Posted by reptileman
Hi i don't think you supposed to charge 1 cell glow ignitors over 1 amp... 1C on one cell 4400mah i belive 4.5 amps would be way to hight of a rate for one cell and would cause damage to it.
Yes, I would guess that the batteries are high-resistance types made to supply steady low currents and resist self discharge. As such, they should probably be charged always at low rates.

And/Or... there is some circuitry inside the glow drivers which is interfering.

David
Old Dec 05, 2008, 01:08 AM
pepatrick is offline
Find More Posts by pepatrick
Registered User
pepatrick's Avatar
ND,

Can you let me know when you get the new displays for the 610 duo. I need 2 of them.

Thanks

Philip
Old Dec 05, 2008, 05:40 AM
mstreet is offline
Find More Posts by mstreet
Registered User
[QUOTE=NipponDave]Hello Everyone,

....
Now we are releasing the new single-port 0720iNET (7S, 20A, 250W limits!!!) and dual-port DUO2 (adds 50W+50W discharge and high-vis LCD to original DUO).

Dave,

Dumb question: will the 720i be able to be linked with the 610i for charging large packs (respecting the 10A limit of the latter) or do you have to use two 720is?

thanks,

Malcolm
Old Dec 05, 2008, 07:23 AM
meronr is offline
Find More Posts by meronr
One bad mama jama
Quote:
Originally Posted by NipponDave
Yes, I would guess that the batteries are high-resistance types made to supply steady low currents and resist self discharge. As such, they should probably be charged always at low rates.

And/Or... there is some circuitry inside the glow drivers which is interfering.

David
That doesn't seem to be the issue due to the fact that I have been able to charge both ignitors at 1c on my other charger which is a MRC 989 brain.
Old Dec 05, 2008, 07:34 AM
MrMel is offline
Find More Posts by MrMel
Electric Helis is my game
MrMel's Avatar
Any plans for a high watt 10-12s charger for us that have those large pack (single 10s1p)
Old Dec 05, 2008, 07:41 AM
meronr is offline
Find More Posts by meronr
One bad mama jama
Can someone also help me out with trying to print out a copy of the charging flow chart for the 610 duo but when you click on the link i get a blank page.Please help me with this issue, thanks in advance
Old Dec 05, 2008, 09:19 AM
meronr is offline
Find More Posts by meronr
One bad mama jama
Quote:
Originally Posted by meronr
Can someone also help me out with trying to print out a copy of the charging flow chart for the 610 duo but when you click on the link i get a blank page.Please help me with this issue, thanks in advance
Nevermind was able to get them thanks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Hyperion EOS 0610i DUO Multichemistry Charger Review Spackles94 Batteries and Chargers 113 Sep 12, 2015 09:40 AM
Discussion Hyperion EOS DUO-NET Beta logging Software NipponDave Batteries and Chargers 83 Dec 01, 2008 12:07 AM
Sold Hyperion EOS 0610i DUO Charger - $190 Shipped hilgert Aircraft - Electric - Batteries & Chargers (FS/W) 3 Nov 25, 2008 09:00 PM
Discussion Hyperion EOS 0610i DUO - where to buy? jaron Batteries and Chargers 2 Jan 22, 2008 10:21 AM
Sold hyperion eos 5i chargers $72.00 shipped ea kmp647 Aircraft - Electric - Batteries & Chargers (FS/W) 3 Feb 15, 2006 12:23 PM