Thread Tools
Nov 26, 2008, 12:59 PM
Test your skills....fly IMAC!!
sun.flyer's Avatar
New Product

3D Hobby Shop's 89" AJ Slick:


3D Hobby Shop's is pleased to announce that they have joined up once again with world champion pilot, Andrew Jesky on yet another fantastic project. The all new 89" AJ Slick is the newest addition to the growing line up of giant scale 3D/aerobatic airplanes that are currently being offered by 3D Hobby Shop.

Below is some information taken from the 3D Hobby Shop website about the new 89" AJ Slick:

"Andrew Jesky, 2008 ETOC and XFC champion, and member of the United States F3a pattern world team, has designed a spectacular 89" ARF aircraft for 3DHobbyShop. The 89" Slick 540 is modeled after the full-size Slick 540 aircraft which is the latest, highest-tech full-size aerobatic aircraft. The AJ Slick delivers the goods:

Total stability which will remind you of a 40% aircraft.

Effortless no-rock harriers and easy, stable hovers/torque-rolls.

Powerful, precise snaps even at lower airspeeds.

Lots of lift in knife-edge flight thanks to the big, light fuselage and powerful rudder.

Put the Slick next to some other popular 86-89" 50CC aircraft and it makes them look small. The huge fuselage of the Slick delivers spectacular knife-edge flight as well as slow downlines for constant-speed performance. All of this is possible on a stock DA-50 or DL-50 engine. Please watch the videos below, flown on a stock DA-50R on MTW TD-75K canister, to get an idea of the vertical performance of this package. Contact 3DHobbyShop to discuss your requirements or for information on engine selection if you fly at high altitudes.
We have collected data on the Slick at 5,000 ft. as well as at sea level."


Specifications:

- 89" wingspan

- 1480 sq. in. wing area

- 88" long w/o spinner, typically 91-92" w/ spinner

- 18.5-19.5 lbs. depending on setup

- 50-60CC gasoline engine

- MTW TD-75K canister mounts included

- Carbon wing spar tube 28mm

- Carbon spar receiver tubes

- Carbon stab spar

- Carbon stab receiver tubes and stub spars

- Carbon one-piece main landing gear

- Carbon tail wheel bracket

- Genuine Oracover covering, repairable with commonly available Ultracote material

- All hardware is included


Videos:

Video #1 - Andrew Jesky flying. Stock Desert Aircraft DA-50 on Menz 23x8 prop.

Video #2 - Andrew Jesky flying. Stock DA-50 on Menz 23x8.

Video #3 - Ben Fisher flies the 89" Slick on a Hacker A60L electric motor.

Video #4 - Andrew Jesky flying. Stock DA-50 on Menz 23x8

Additional Videos - Check out Josh Young's (BoneDoc) blog.

Pricing:

- $679.99

89" AJ Slick Manual

89" Slick assembly manual Rev 1.0 pdf


NOW IN STOCK!!!!!!


Due to the size of the shipping boxes, CONTINENTAL USA ORDERS ONLY! All others please contact 3DHobbyShop to discuss your shipping needs.


Photo Gallery:

- The 89" AJ Slick will be offered in two color schemes. The stock AJ scheme and a new Yellow scheme!!

www.3dhobbyshop.com
Last edited by sun.flyer; Feb 23, 2009 at 03:22 PM. Reason: added wing area
Sign up now
to remove ads between posts
Nov 26, 2008, 01:09 PM
"Because I was pǝʇɹǝʌuı"
bighead93's Avatar
Wow...that Is Big!
Nov 26, 2008, 01:59 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
If you look back a few years, 50CC airplanes used to be a lot smaller than they are today. And, they used to fly a lot worse. The trend has been to bigger, floatier aircraft, and this plane pushes it even farther.

I remember Josh Young's first comment after his first flight on the 89" Slick - "Well, there's no more reason to fly my 35% plane!".

The 89" Slick feels so incredibly light. Someone asked at SEFF this year if it felt like a foamy. In reality, it feels better than most foamies.

A big thanks to Andrew for doing this design work for us. Also, a big thanks to Scott Stoops for high-altitude testing and to Josh Young for beta testing.
Nov 26, 2008, 02:07 PM
Registered User
txfly's Avatar
i bet that thing doesnt fly on 3s!
Nov 26, 2008, 02:12 PM
Test your skills....fly IMAC!!
sun.flyer's Avatar
Quote:
Originally Posted by txfly
i bet that thing doesnt fly on 3s!

3s x 4

Tim
Nov 26, 2008, 02:17 PM
Registered User
Knotnuts's Avatar
Drool, drool....I sure hope that this weeks modest stock market rally keeps it up till they get here.
Nov 26, 2008, 02:17 PM
OOPS
Manta1's Avatar
can i run it on my gr45 out of my other slick?
Nov 26, 2008, 02:49 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
I'm flying one on a Hacker A60-16L and 18L. For me, it's great. Josh has one on the massively powerful Reaper Gr-70. Lots and lots of power.
Nov 26, 2008, 02:51 PM
Registered User
Knotnuts's Avatar
How much wing area?
Nov 26, 2008, 02:54 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
1480
Nov 26, 2008, 03:12 PM
Jason
super_nova's Avatar
When will we see some actual pictures of the yellow scheme?
Nov 26, 2008, 04:10 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
Asap.
Nov 26, 2008, 04:13 PM
Fly Low or you'll never know!
RC4x4's Avatar
The 89" Slick is pretty cool in person. I am just trying to figure out what motor at my altitude. Scott and Ben have already given me some idea's.
3W75?

Cory
Nov 26, 2008, 04:30 PM
flying yellow and black
It looks like my Christmas present is going to be arriving in February. Somehow, I'm o.k. with that
Nov 26, 2008, 05:21 PM
Senior to who? Member
crossup's Avatar
"Well, there's no more reason to fly my 35% plane!".
...sigh


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article 3D Hobby Shop's 51" AJ Slick ARF Review sun.flyer 3D Flying 122 Jan 23, 2010 07:15 AM
Video 3D Hobby Shop 51" AJ Slick: sun.flyer Electric Plane Talk 2 Sep 27, 2008 08:51 AM
Video 3D Hobby Shop 51" AJ Slick: sun.flyer Electric Plane Talk 6 May 30, 2008 08:01 PM
Video 3D Hobby Shop's AJ Slick Clark Warfel Electric Plane Talk 3 May 08, 2008 07:31 AM