Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Dec 08, 2008, 10:09 PM
mulikow is offline
Find More Posts by mulikow
Team Mulikow
mulikow's Avatar
Ive got the head gear with an assorment of lens....with a light...lol
Sign up now
to remove ads between posts
Old Dec 09, 2008, 07:31 AM
dizzymarkus is offline
Find More Posts by dizzymarkus
Team Mulikow 3D ---- :0)
dizzymarkus's Avatar
was a great buy working on the ff100 and 200's lol

Markus
Old Dec 09, 2008, 05:16 PM
mulikow is offline
Find More Posts by mulikow
Team Mulikow
mulikow's Avatar
Oh for sure, i cant do anything with out them, makes a world of a difference. Kids laugh at me when i wear them though.
Im still waiting for some parts for the 200, should be in this week.
I made a few adjustments on the tail section, i think it will help out alot. Will post a vid once im up and flying
Old Dec 10, 2008, 08:18 AM
dizzymarkus is offline
Find More Posts by dizzymarkus
Team Mulikow 3D ---- :0)
dizzymarkus's Avatar
Man with the original ff100 build I had trouble finding quality servos that small. I now got the silver cf frame and I bought some cirrus 4g micro servos ----$22a piece---------they are to small -- how ironic hu

Any idea of what to use to make the servo mountinga bit easier ? I thought about 2 small pieces of plexi glass -- like two new plates on either side. !st cup of coffee lol I'll post a few pics soon but was looking for some suggestions. I huess Im not suppose to have a ff1-- rof I finally get the tail figured out and now the servos are too small

Markus
Old Dec 10, 2008, 08:23 AM
Infms is offline
Find More Posts by Infms
Fish? Practice catch & release
Infms's Avatar
For those interested, the FireFox 200 is on sale at hobbycity.com (only 4 hours left!) for $108. Includes everything but RX & TX. Cheers!
Old Dec 10, 2008, 08:33 AM
MikeHRC is online now
Find More Posts by MikeHRC
Team Mulikow 3D
Quote:
Originally Posted by dizzymarkus
Man with the original ff100 build I had trouble finding quality servos that small. I now got the silver cf frame and I bought some cirrus 4g micro servos ----$22a piece---------they are to small -- how ironic hu

Any idea of what to use to make the servo mountinga bit easier ? I thought about 2 small pieces of plexi glass -- like two new plates on either side. !st cup of coffee lol I'll post a few pics soon but was looking for some suggestions. I huess Im not suppose to have a ff1-- rof I finally get the tail figured out and now the servos are too small

Markus
Markus,

I used TowerPro SG 50 / Hextronix HXT500 - you need to do a little "adjusting" of the frame to make either fit, but they are a much better servo than the 3.7 / 4.3 gram ones IMHO.

Mike.
Old Dec 10, 2008, 09:21 AM
mulikow is offline
Find More Posts by mulikow
Team Mulikow
mulikow's Avatar
Yes, i was about to suggest the towerpro 5g's. Think im going to use those in the ep200 also. Make sure they arent knock-offs.
lightflightrc.com has 4 of them for i think 26 dollars
Old Dec 10, 2008, 09:30 AM
dizzymarkus is offline
Find More Posts by dizzymarkus
Team Mulikow 3D ---- :0)
dizzymarkus's Avatar
Thanks fellas -- after trying to fit the cirrus -- I tired hs-55 they fit side to side but not in height so I will have to look around lhs and see what else I can find lol

Heres a link to the servos -- http://www.hobbypeople.net/gallery/440101.asp
the specs seem real nice and handleing the servos feel way tighter than the others that small and come highly recommended from LHS -- lol if they dont work I dont have a problem dealing with them :0)

Markus
Old Dec 10, 2008, 09:42 AM
flypaper 2 is online now
Find More Posts by flypaper 2
Registered User
flypaper 2's Avatar
The HXT 500s are $3.49 a piece at Hobby King. I get 10 at a time for the foamys as well as the firefox and hurricane 200. Tough all around servo.
Old Dec 10, 2008, 08:26 PM
dizzymarkus is offline
Find More Posts by dizzymarkus
Team Mulikow 3D ---- :0)
dizzymarkus's Avatar
why kind of frame cutting should I have to do with these servos-- towerpro 5g'ers to fit?

I am not really into cutting the nice frame and there isnt much room to go either way top or bottom. Hope not much and they fit well I ordered the 4pack for $27 :0) thanks Mulikow.

Markus

In the mean time I can pop these on one of the three stock frames lol
Old Dec 10, 2008, 09:10 PM
mulikow is offline
Find More Posts by mulikow
Team Mulikow
mulikow's Avatar
Dizzy, i have no clue what your size of the holes are in your frame...i would have assummed you would check the specs on lightflights site before you ordered them.
Guess you can check now...while your waiting for them..lol
Old Dec 10, 2008, 09:19 PM
dizzymarkus is offline
Find More Posts by dizzymarkus
Team Mulikow 3D ---- :0)
dizzymarkus's Avatar
lol no worries heheheh was only $28 I can use em in a foamy

Markus
Old Dec 14, 2008, 07:57 PM
dizzymarkus is offline
Find More Posts by dizzymarkus
Team Mulikow 3D ---- :0)
dizzymarkus's Avatar
Hey -- Im not making a dime from this just passing it along. If any of you guys were thinking of gettin the ELE fiberglass frames now is the time to do it. The have overstock of red fiberglass frames, but also have white and blue along with silver. The current deal I can get them to your door is:

$35.00 USD for the silver
$31.00 USD white,blue
$30.50 USD red
USCON48
The red will save ya like 3 bucks and the others around 2 bucks. I have cut some deals with Ele :0) Pm me if your interested and I will send you a direct link.

Thanks fellas -- off to finish up (start lol) the tail link rod and it should be ready.

Markus
Last edited by dizzymarkus; Dec 14, 2008 at 10:47 PM. Reason: shipping is included now
Old Dec 15, 2008, 10:29 PM
dizzymarkus is offline
Find More Posts by dizzymarkus
Team Mulikow 3D ---- :0)
dizzymarkus's Avatar
Evening Gents,

I finally have a running ff100 lol. I onlyhave an 8x8 area with 7foot ceilings so I trimmed as far as I can go inside -- no flying till the 23rd :0(.

Those towerpro50- 5g'ers dont fit the fiberglass frames incase anyone was wondering -- dont think you can file enough of the fame away to make them fit without compromising the integrity oif the fame. Back to the drawing board there.

Markus

CURRENT SPECS:
3 Cirrus 101std 4g micro servos --absolutely bolt on -- perfect fit
http://www.hobbypeople.net/gallery/440101.asp
Futaba 3114 on tail
Align 550x HH gyro
CX2 battery -- 7.4 800mah
Stock motor and pinion

The propwash is amazing at how much it can move this helia round lol

http://www.youtube.com/watch?v=ng-Tk...e=channel_page

A bit more trimming and its gettinbetter -- need the armory :0)

http://www.youtube.com/watch?v=EcMrT...e=channel_page
Last edited by dizzymarkus; Dec 15, 2008 at 10:36 PM.
Old Dec 16, 2008, 12:13 AM
Ampdraw is offline
Find More Posts by Ampdraw
Registered User
Dizzy,
Glad you got it flying. (refrained from build duration puns! )

I see your using the stock ele motor (15t?) on 2s.
I could not get any decent power from the ele stuff on 2s.

One question: Does it piro left? ie did you sort the tail?

Amp


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Data Pocket Zoom (EP100-EP200) configs/crash stats salat Micro Helis 5 Jul 12, 2011 09:17 PM
Discussion firefox/ ep100 scale fuse video tkoguy Micro Helis 3 Jan 31, 2009 11:37 PM
Discussion King 2 or EP100/EP200? fretman Micro Helis 18 Mar 19, 2008 01:49 PM
Sold ELE Firefox EP100 V2 barebones kit and spares sgporc Aircraft - Electric - Helis (FS/W) 6 Feb 10, 2008 05:03 PM
Discussion looking for Gaui EP100, EP200, Pixy ZAP, etc. heli kit salat Micro Helis 4 Jan 01, 2008 02:57 PM