I have instruction sheets for OS and Saito dating back to the 60's. All OS four cycles from the FS60 to the 4 cylinder 240. Saito back to their first including the ignition 60

All the rear cam OS four cycles have a left hand thread on the cam shaft screw including the 60, 75, 80, and 90

I would like instructions and especially parts breakdown for different Irvine 40 ies. I have one but can not identify which one I have. I need to try to get the right part for it. (there are still some parts available)

I have a large format scanner I used for the manuals on my site. I have not owned too many different engines during my hobby career. I started out with a couple engines in '96 but went all electric until 2006. So, I only have a handful of manuals in my possession.

Here's another link.

http://www.rojobcn.com/catalogos/catalogomotores.htm

Greg

Here is the OS60 Open Rocker Manual

Sarg96

Originally Posted by sarg96

Here is the OS60 Open Rocker Manual

Sarg96

Thanks to Sarg96

Here is the same in PDF OS60 Open Rocker Manual

Magnum/ASP/SC 52FS foursstroke:

Does anyone have a good quality version of the Quadra/US Engines manuals for 35 and 41/42?

Found the Q35 , Q42 , US35 , US41

Hi Ken,
I was wondering if you have the manual for an os 61 sf-p.
i can find the carb setting, but don't have anything on the actual engiine.
thanks in advance,
carlos

cmarquez@deltad.com

Originally Posted by kenhiraihnl

in case you haven't seen it, there's a sticky on 'the other forum'...ken

"If you have an older O.S. Max engine, and need the instructions for it, but they're not listed on the O.S. Max Website, please send an email to the address below, and we'll send you an electronic copy in Adobe "pdf" form.

If the particular engine's instructions are not available because it's too old, we'll let you know.

_____________________________

Bill Baxter, Manager Hobby Services/Futaba Service/North America
3002 N. Apollo Dr. Ste. 1 Champaign, IL 61822 USA
Service Phone: 217 398-0007
Email: hobbyservices@hobbico.com"

Originally Posted by cmarcar

Hi Ken,
I was wondering if you have the manual for an os 61 sf-p.
i can find the carb setting, but don't have anything on the actual engiine.
thanks in advance,
carlos

cmarquez@deltad.com

Cmarcar
His email was right there in your quote , I would email him directly he
may not be back to this thread

Finally found this one
Saito 270T MK2

have to split up the pdf , can not post more than 4 meg file

Hi Guys, I have been asked more than once to email this manual to people. The 155 (the engine I have) has the same manual. - John.

Originally Posted by Boomerang1

Hi Guys, I have been asked more than once to email this manual to people. The 155 (the engine I have) has the same manual. - John.

Thanks John
Same files in PDF

I could really use any info for a Magnum .46GPA--Anyone??