Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Happymcc, who may elect to delete unwanted replies.
Nov 22, 2008, 11:25 PM
Suspended Account
I have instruction sheets for OS and Saito dating back to the 60's. All OS four cycles from the FS60 to the 4 cylinder 240. Saito back to their first including the ignition 60
Sign up now
to remove ads between posts
Nov 22, 2008, 11:33 PM
Suspended Account
All the rear cam OS four cycles have a left hand thread on the cam shaft screw including the 60, 75, 80, and 90
Nov 23, 2008, 03:29 AM
Registered User
I would like instructions and especially parts breakdown for different Irvine 40 ies. I have one but can not identify which one I have. I need to try to get the right part for it. (there are still some parts available)
Nov 23, 2008, 04:30 PM
Dieselized User
gkamysz's Avatar
I have a large format scanner I used for the manuals on my site. I have not owned too many different engines during my hobby career. I started out with a couple engines in '96 but went all electric until 2006. So, I only have a handful of manuals in my possession.

Here's another link.

http://www.rojobcn.com/catalogos/catalogomotores.htm

Greg
Dec 21, 2008, 10:01 AM
Deal Honestly or Don't Deal
Here is the OS60 Open Rocker Manual

Sarg96
Dec 21, 2008, 06:41 PM
I USE CAPS - EYE TROUBLE
Happymcc's Avatar
Quote:
Originally Posted by sarg96
Here is the OS60 Open Rocker Manual

Sarg96
Thanks to Sarg96

Here is the same in PDF OS60 Open Rocker Manual
Last edited by Happymcc; Dec 21, 2008 at 06:49 PM.
Dec 25, 2008, 11:31 PM
Grumpa Tom
Kmot's Avatar
Magnum/ASP/SC 52FS foursstroke:
Dec 27, 2008, 02:27 PM
Registered User
Does anyone have a good quality version of the Quadra/US Engines manuals for 35 and 41/42?
Jan 22, 2009, 11:31 PM
Registered User

manual for os 61 sf-p


Hi Ken,
I was wondering if you have the manual for an os 61 sf-p.
i can find the carb setting, but don't have anything on the actual engiine.
thanks in advance,
carlos

cmarquez@deltad.com




Quote:
Originally Posted by kenhiraihnl
in case you haven't seen it, there's a sticky on 'the other forum'...ken

"If you have an older O.S. Max engine, and need the instructions for it, but they're not listed on the O.S. Max Website, please send an email to the address below, and we'll send you an electronic copy in Adobe "pdf" form.

If the particular engine's instructions are not available because it's too old, we'll let you know.

_____________________________

Bill Baxter, Manager Hobby Services/Futaba Service/North America
3002 N. Apollo Dr. Ste. 1 Champaign, IL 61822 USA
Service Phone: 217 398-0007
Email: hobbyservices@hobbico.com"
Jan 22, 2009, 11:44 PM
I USE CAPS - EYE TROUBLE
Happymcc's Avatar
Quote:
Originally Posted by cmarcar
Hi Ken,
I was wondering if you have the manual for an os 61 sf-p.
i can find the carb setting, but don't have anything on the actual engiine.
thanks in advance,
carlos

cmarquez@deltad.com
Cmarcar
His email was right there in your quote , I would email him directly he
may not be back to this thread
Jan 23, 2009, 02:02 PM
I USE CAPS - EYE TROUBLE
Happymcc's Avatar
Finally found this one
Saito 270T MK2

have to split up the pdf , can not post more than 4 meg file
Last edited by Happymcc; Feb 02, 2009 at 06:15 PM.
Jan 23, 2009, 04:51 PM
You made that out of trees?
Boomerang1's Avatar

Enya 120 & 155


Hi Guys, I have been asked more than once to email this manual to people. The 155 (the engine I have) has the same manual. - John.
Jan 23, 2009, 06:01 PM
I USE CAPS - EYE TROUBLE
Happymcc's Avatar
Quote:
Originally Posted by Boomerang1
Hi Guys, I have been asked more than once to email this manual to people. The 155 (the engine I have) has the same manual. - John.
Thanks John
Same files in PDF
Feb 05, 2009, 08:19 PM
Registered User
lousyflyer's Avatar
I could really use any info for a Magnum .46GPA--Anyone??


Thread Tools