Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Nov 15, 2008, 06:41 AM
louy is offline
Find More Posts by louy
Registered User
Discussion

jet joe auto start help!!!!!!!


can any one help me as too why my jet joe auto start does not go into start mode when i push the stick up and down???? sometimes it does and most of the time it dosent.
Sign up now
to remove ads between posts
Old Nov 15, 2008, 10:19 AM
HobbyCNC is offline
Find More Posts by HobbyCNC
Registered User
HobbyCNC's Avatar
Quote:
Originally Posted by louy
can any one help me as too why my jet joe auto start does not go into start mode when i push the stick up and down???? sometimes it does and most of the time it dosent.
Does the manual have a trouble shooting section?

Dave
Old Nov 15, 2008, 02:51 PM
Boomerang1 is offline
Find More Posts by Boomerang1
You made that out of trees?
Boomerang1's Avatar
Send a PM to 'knobby1'. That's Brett Smith (smithy) who has some connection to Ausjets who had something to do with these engines in Oz.

http://www.ausjets.com/

What ECU are you using? A friend recently bought the same ECU as used with the JJ ,which I believe is a top quality unit, to convert his Wren 54 from manual to auto start. He commented that the start procedure was a little different to the Wren ECU.

Good luck. I have a feeling you are going to need it. - John.
Old Nov 15, 2008, 06:45 PM
starzak is offline
Find More Posts by starzak
Tye
starzak's Avatar
Make sure that your throttle trim is at high.
Old Nov 16, 2008, 01:25 PM
bluescoobydoo is offline
Find More Posts by bluescoobydoo
Registered User
bluescoobydoo's Avatar
check you glow plug connection my wren will not even attemp a start if the glow plug has blown
what happens if you leave the stick forward like a jet cat?
Old Nov 16, 2008, 09:52 PM
invertmast is offline
Find More Posts by invertmast
Registered User
has the throttle set procedure been completed completely and properly
Old Nov 18, 2008, 12:32 AM
tiny_feet is offline
Find More Posts by tiny_feet
Registered User
Hi....Try this if you have one
learn the parameters this allows the TEMS to Memorize and store your radio's throttle settings for shutdown,Idle,and full thrust positions.this has to be done only once unless the radio is replaced.
JR Radio...Throttle ATV (travel Adjust):-100/+100;throttle trim: 50%;normal
Futaba Radio....Throttle ATV:-100/+100 ; Reversed.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
MP Jet 25/35 prop help mdh Power Systems 7 Sep 07, 2003 08:53 PM
Electric High Start Help PROACE Electric Sailplanes 22 Mar 22, 2002 03:08 PM
Jet Trainer To Start With FERRAN Electric Ducted Fan Jet Talk 10 Feb 22, 2002 04:37 AM
Jet designers I need help DNA Electric Ducted Fan Jet Talk 4 Jan 07, 2002 03:20 PM