Thread Tools
Old Nov 16, 2008, 04:06 AM
Nitrosharkiii is offline
Find More Posts by Nitrosharkiii
Suspended Account
I have ordered a set of drivers with my chopper this set here
Sign up now
to remove ads between posts
Old Nov 16, 2008, 04:12 AM
Gino CP is offline
Find More Posts by Gino CP
Team Mulikow
Gino CP's Avatar
That's very nice. A good grip really helps with the tight screws. On this heli, just test each screw. Any screw that moves with medium effort, remove and reinstall with loctite 242. Those that are tight, leave them be. I found such screws have generous amount of threadlock. Perhaps too generous!
Old Nov 16, 2008, 04:15 AM
Nitrosharkiii is offline
Find More Posts by Nitrosharkiii
Suspended Account
1.5 mm hex keys dont last, in any set I have owned.... I will buy some spare sets or them you seem quite happy with your new bird Gino
Old Nov 16, 2008, 04:20 AM
Gino CP is offline
Find More Posts by Gino CP
Team Mulikow
Gino CP's Avatar
I am. I am very pleased with the quality of this kit. If they can just find standardized and true 1.5mm hex bolts then this will be perfect. But these hex bolts are way better than the philips head bolts on the V2. Just use discretion when testing each tightness.

I am also impressed with the adjustable battery plate. It can be set to slope downward or be level. I also like the lower plate design. It uses cf and aluminum so screws can be thread locked unlike plastic.

I am just waiting for the gyro before I proceed.
Old Nov 16, 2008, 04:26 AM
Nitrosharkiii is offline
Find More Posts by Nitrosharkiii
Suspended Account
the way I stacked my v2 in last week is testimony to the strength of the cf frames it hit very hard and destroyed alot of parts but the frame is fine, actually the cf boom split like a firework!! those servos you are using look very nice but quite expensive
Old Nov 16, 2008, 04:31 AM
Nitrosharkiii is offline
Find More Posts by Nitrosharkiii
Suspended Account
I want to find a supplier for hex screws and nuts for the servos instead of phillips head
Old Nov 16, 2008, 05:55 AM
lyclyc is offline
Find More Posts by lyclyc
Pirouetting flip master
gino, what is the meaning of one piece swash plate?
so far, you find out any compatibility with copterx 450?
Old Nov 16, 2008, 06:08 AM
Gino CP is offline
Find More Posts by Gino CP
Team Mulikow
Gino CP's Avatar
Maybe you are referring to the one piece frame. The Trex 450 has two layers of cf per side. This makes the bottom plate wider for electronics. The Black Angel has one layer per side. So it has a very narrow front profile.

To be honest, I wouldn't count on Trex compatibility. This is not a Trex clone. For that, you have the CopterX 450 SE V2. 100% compatible.

Although it shares the basic Trex 450 geometry, the parts themselves are different. You can possibly use an entire Trex head and tail assembly. But then it won't handle like a Black Angle anymore.
Old Nov 16, 2008, 06:59 AM
batusaix is offline
Find More Posts by batusaix
User Extraordinaire
Or get the Black Angel head(assuming parts availability) & put it on my Wing maybe, & I still got a Wing head when I slam it to the ground.
Old Nov 16, 2008, 07:03 AM
lyclyc is offline
Find More Posts by lyclyc
Pirouetting flip master
Quote:
Originally Posted by Gino CP
Maybe you are referring to the one piece frame. The Trex 450 has two layers of cf per side. This makes the bottom plate wider for electronics. The Black Angel has one layer per side. So it has a very narrow front profile.

To be honest, I wouldn't count on Trex compatibility. This is not a Trex clone. For that, you have the CopterX 450 SE V2. 100% compatible.

Although it shares the basic Trex 450 geometry, the parts themselves are different. You can possibly use an entire Trex head and tail assembly. But then it won't handle like a Black Angle anymore.
hmmm, check this "240 reinforced one piece swash plate"
is it different from a copterx 450 swash?
Old Nov 16, 2008, 07:09 AM
Gino CP is offline
Find More Posts by Gino CP
Team Mulikow
Gino CP's Avatar
It is different. It has this connecting ring between the aileron ends. The spinning part is also chunkier. I do not know what that explanation you quoted means. The balls look robust. They also use a large hex driver for installation. This is a welcome relief since it has less chance of stripping.
Old Nov 16, 2008, 09:22 AM
lyclyc is offline
Find More Posts by lyclyc
Pirouetting flip master
i quoted from ehirobo's copterx BA's picture
still eagerly waiting for your flight report...
Old Nov 16, 2008, 09:29 AM
Gino CP is offline
Find More Posts by Gino CP
Team Mulikow
Gino CP's Avatar
Oh that would be the partial ring that connects the ball posts. It spans 240 degrees. It reinforces the post to remove flexing.
Old Nov 16, 2008, 12:11 PM
lyclyc is offline
Find More Posts by lyclyc
Pirouetting flip master
Quote:
Originally Posted by Nitrosharkiii
boy oh boy I really hope copterx comes out with a 50 size heli...... they would clean up the market
Quote:
Originally Posted by Slyster
They did. The CopterX 500. That's the one I have my eye on for next year. http://www.copterx.com/kit_cx500se.html

copterx 500 is not nitro 50 size..
nitro 50 is 600 class (from trex 600)
Old Nov 16, 2008, 12:25 PM
nybbler is offline
Find More Posts by nybbler
Registered User
CopterX 450 -- 325mm blades
CopterX 500 -- 425mm blades
CopterX Black Angel -- um, Gino? Is it 325 or did they use slightly larger blades?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New Copterx range.. Black Angel / 480 /500 Myk-e-b Mini Helis 32 Jul 08, 2009 07:21 PM
Sold New Hummingbird 3d pro/Black hawk helicopter and other stuff!!! HyperHelis Aircraft - Electric - Helis (FS/W) 3 Jan 23, 2008 07:27 AM
For Sale Black Horse ARF new, Arrow 3D, $135 shipped krosypal Aircraft - Fuel - Airplanes (FS/W) 0 Nov 15, 2007 01:29 AM
New Switchback 3D MAH42 Parkflyers 4 Mar 08, 2003 07:14 AM
FS-New Zc-400, yellow/black Gonflyin01 Aircraft - Electric - Airplanes (FS/W) 0 Nov 13, 2002 04:30 PM