Highly aerobatic 2 mm coro plane
tried to make a highly aerobatic plane using CORO, 2mm sheet from my own design/ ideas. Here is the spec.
WS= 35.5" w/o aelerons. Aelerons= 4"x 2"
Length = 40 Inch
Motor is TR 35-30C 1100 KV with 10x4.7 prop from united hobby. 30A esc, Gws rcvr and 9 gms servos X 4. 1800mAH 3cell Polymax.
AUW with Battery = 831 gms.
The wing was made with the usual bending but this time i made the bend length wise to get a smoother leading edge.
Maidened few days back. It flew really well with min trims. It was so stable and also aerobaitc too due to the large control surfaces.
I have recently changed it to D750 motor from UH, which gives more efficiency.
I will post some videos when i have sombody to take it.
here are some pictures.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Highly Aerobatic plane with composite material||ashtasky||Foamies (Scratchbuilt)||4||Oct 31, 2008 06:09 AM|
|Discussion||Highly aerobatic, tight spaces, floaty, lots of power and EPP, what plane do I want?||Evan Byrne||Foamies (Kits)||16||Dec 16, 2007 07:39 PM|
|Question||Highly Aerobatic Plane for an A30-28?||Gregg28||3D Flying||22||Aug 02, 2006 07:22 PM|
|sport/aerobatic 2||Neil Straker||Sport Planes||5||Apr 27, 2001 06:55 PM|
|sport/aerobatic 2||Neil Straker||Foamies (Kits)||1||Apr 27, 2001 01:56 PM|