Thread Tools
This thread is privately moderated by DaOldGuy, who may elect to delete unwanted replies.
Apr 21, 2010, 01:31 AM
2 metre rule applies!
DRAMJET's Avatar
April 2010, late on the Infineon scene.
80% I3d, 27" span, 195g 7oz without battery, 24g 1500kV blue wonder, 10A esc, Tgy 9g + 2x HXT500 servos, 900 mAh 2s batts. 1st attempt at checkerboard painting.
Sign up now
to remove ads between posts
Jun 10, 2010, 09:01 PM
Registered User
ChuckAdams's Avatar

i3D - Pitts Python


Location: Troy, MI
Foam Type: 1.9#EPP
AUW: 13.2 oz.
Mainly Outdoor with a little Indoor
Motor: Dualsky 2826CA-18T
ESC: Dualsky 18A/25A V2
Lipo: Thunderpower 3S 730 Mah 20C
RX: Sepktrum AR6110E
Servos: Hitec HS55 (Aileron), Eflite S60 (Rudder, Elevator)
Paint: Krylon H2O
Decals: Laserjet Water Slide
Placed in Serivce: 6/8/2010
Lights: Tiny Bright Lights
Jun 11, 2010, 01:35 AM
Flashmeister Aviation Inc
MrFlash's Avatar
That sure is a lot of planes !!
Great job with the blog Ron
Jun 11, 2010, 06:08 AM
Flying Half Pound and Down
DaOldGuy's Avatar
Quote:
Originally Posted by MrFlash View Post
That sure is a lot of planes !!
Great job with the blog Ron
They just keep coming and they all look great!
Jun 16, 2010, 05:37 AM
Flying Half Pound and Down
DaOldGuy's Avatar

More Videos


Lance Dalton <C.H.E.A.P.>
Buster the Foam Biter and some slow and low.
Buster at the park.wmv (1 min 24 sec)
Jul 27, 2010, 12:54 PM
Plane Destroyer / Life Enjoyer
airbagit13's Avatar
Here is my Beauty in Miami, FL.






Rimfire 350 motor
E-flite 10 amp ESC
9x7 prop, i think
800 mah, 3cell lipo, also have a 550 mah 3cell.
Hitec 55 servo on ailerons
2 - cheapo 5g servos on rudder and elevator

3mm EPP on sides, 6mm EPP on rest, 9mm EPP on center. CF reinforcement.
Oct 18, 2015, 07:41 PM
Registered User
Camillus, NY USA
EPP 3mm fuse sides, 6mm for the rest
10.5 oz, 294 grams
Indoor Infineon
2204 motor (switching to 2206 when it arrives)
12 amp ESC, 8 x 4.5 prop
750 mah 3 s
D4RII Rx for Taranis
Rud and Elev 5 gram, Ail 10 gram metal gear
Painted
3d printed FW and aileron connector thingamajigs
Just finished, haven't flown it yet :-)
Oct 18, 2015, 08:51 PM
Flying Half Pound and Down
DaOldGuy's Avatar
Nice... that is a really sharp scheme. That set up should be very happy
May 27, 2016, 08:48 AM
Registered User
I don't see a thread anywhere for the Maniac. I'm guessing that it is identical to the Infineon build, but with only one wing of a slightly different design.
Are there plans and/or a build log posted anywhere for the Maniac?

Thanks,
bolts
May 28, 2016, 10:57 AM
Flying Half Pound and Down
DaOldGuy's Avatar
Quote:
Originally Posted by boltsinneck View Post
I don't see a thread anywhere for the Maniac. I'm guessing that it is identical to the Infineon build, but with only one wing of a slightly different design.
Are there plans and/or a build log posted anywhere for the Maniac?

Thanks,
bolts
Let me take a look.... It was similar but not the same.. The plans and build thread were part of a magazine from the UK.
Thread...
https://www.rcgroups.com/forums/showthread.php?t=822545

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-B Micro Flying Wing wooglin Aircraft - Electric - Airplanes (FS/W) 3 Jun 05, 2003 10:45 AM
$35 Mini-B micro flying wing f/s moter & prop included (i got pics) sylair Aircraft - Electric - Airplanes (FS/W) 26 Apr 08, 2003 09:46 PM
Mini Dragonfly Micro Heli Clive Henry Jones Micro Helis 2 Mar 05, 2003 05:52 AM
Micro Nano lil bitty lil Prop******* AIR MOVER Scratchbuilt Indoor and Micro Models 13 Mar 22, 2002 07:59 PM
Wattage Mini-Max Micro Park Flyer-Anyone have one? mrebman Parkflyers 1 May 10, 2001 07:38 PM