Thread Tools
This thread is privately moderated by parkfly27, who may elect to delete unwanted replies.
Oct 28, 2008, 12:47 AM
that's how i roll!!
parkfly27's Avatar
Thread OP

.40-size e-conversion for $100!!

Hi fellow R/Cers

I converted a 5.5-pound SF eindecker .40 to electric for around $100. here's the components:
Zippy 4-cell 2200 25C Lipo: $40

Towerpro 3520-7 outrunner motor: $30.... This is no longer sold by hobbycity, but there are many equivalent motors on their website (turnigy, hextronik, KDA, ect....)

Towerpro 50A esc: $20
Hextronik 3-amp BEC: $7

Total: $97!!

This setup gives me roughly eight minutes of flying time, and has enough power to hover the plane. The prop is a turnigy 14X10 cherry wood propeller. Total power is around 600 watts.
Even after a hard flight on a hot New Mexico summer day, the battery, motor, and ESC are barely warm.

So far all of the zippy batteries have worked great, both for myself and other flyers. the 25C series holds their voltage right untill the end. I use them on my gws 109, funjet, tribute fx 3D, zagi, and now the eindecker. And did i mention that my 2200's usually take 2300mah after being discharged to 3 volts/cell? You just can't go wrong with hobbycity lipos.

hope this info is usefull to someone.

Sign up now
to remove ads between posts

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
E-conversion for a Hirobo Shuttle/.30 size Lama Hoverup Electric Heli Talk 2 Mar 04, 2013 02:41 PM
Discussion Sig ARF LT 40 E-Conversion for me ?? envirocad Glow to Electric Conversions 10 Mar 17, 2008 03:21 PM
Motor for .40 size sport conversion FullaFoam Power Systems 11 Jun 30, 2005 07:36 AM
Covering advice for .60 size E-conversion Rick W Scale Kit/Scratch Built 3 Feb 26, 2002 06:49 PM