HY propellers - RC Groups
Thread Tools
Oct 23, 2008, 06:56 AM
Registered User
Fourdan's Avatar
Mini-Review

HY propellers


Hi
Some results concerning my first test of a HY (Haoye) propeller
Andre (ADB2) bought by Hobby King
Model 9x3.8 , blade shape in the style slow fly (elliptical shape)
Engravings:
Front : Hy 228.6 x 88.9 ; 9x3.8
Back : Haoye
weight 8.5 g
Colour : black
Material : ?? black nylon or some polymer ??
Surface a little "grainy" or "granited" (I don't know the right word in english)
Hole 6mm + partial 8.1 mm (for the ring)
5 Rings : OD 8.10 mm ; ID : 2.9 ; 3.1 ; 3.95 ; 4.9 ; 5.9 mm
I used the ring 5.9 mm on a 6mm collet adapter. Slightly "forcing" but good
The central external cylinder diameter is around 12.9 mm, so remaining meat in the central crown is (12.9-6)/2 = 3.4 mm
Cylinder axial height = 7.35 mm
General stiffness = comparable to GWS black HD props
I have tested on a Hacker A30-10L up to 12000 rpm, no problem
I have not tested airflow velocity nor spatial distribution.
Results are also translated in formulas .. see graphs
Note that absorbed power is not estimated from dyno testings
(I have none dyno bench)
Just via Power In minus losses (iron losses, copper losses, estimated ESC losses)
Louis
Last edited by Fourdan; Oct 23, 2008 at 07:04 AM.
Sign up now
to remove ads between posts
Oct 23, 2008, 07:56 AM
Registered User
Dr Kiwi's Avatar
108,000rpm/diameter without disintegration - perhaps about the same as GWS HD, and a lot better than a 9x3.8 APC SF (stated limit 65,000rpm/diam). I wonder how it compares with an E-flite (those seem a bit tougher than APC SF).
Last edited by Dr Kiwi; Oct 23, 2008 at 08:56 AM.
Oct 23, 2008, 08:30 AM
Build, fly, learn!
I have to say I really like the way Louis adjusts his formulas and parameters to get best curves fitting to measured data, having seem him doing it.
Here is the link to the prop:
http://www.hobbycity.com/hobbycity/s...dapters_(Black)
May 03, 2009, 07:47 AM
Registered User
Fourdan's Avatar
Hi
Some more results on Haoye (Hy) propellers
Louis
Mar 05, 2016, 06:10 PM
Ghost Rider the pattern's full
santanig5's Avatar

Prop conversion


Hi, I have a Haoye propeller that reads 203 x 88.9 can anyone tell me what size this is in the U.S.?

Thanks
Mar 05, 2016, 06:38 PM
Registered User
Fourdan's Avatar
Quote:
Originally Posted by santanig5
Hi, I have a Haoye propeller that reads 203 x 88.9 can anyone tell me what size this is in the U.S.?

Thanks
Hi
203mm /25.4 = 8" (1 inch = 25.4mm)
Your prop is a 8x3.5 (inches)
The physical dimensions are the same in Europe, USA or China or anywhere in the world
meter, mm are "more international units" than "inch or foot"
Louis
Mar 06, 2016, 07:31 AM
Ghost Rider the pattern's full
santanig5's Avatar
THANKS Louis


Thread Tools