Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 26, 2008, 09:21 PM
Don't watch this...
CooHead's Avatar
...so...the 55" Edge wont be ready with these 40" and 47"?


I'm looking for X-mas presents. The 55" Edge will be available by then?



CooHead
Sign up now
to remove ads between posts
Oct 26, 2008, 09:23 PM
Scott Stoops
sukhoi26mx's Avatar
Quote:
Originally Posted by CooHead
...so...the 55" Edge wont be ready with these 40" and 47"?


I'm looking for X-mas presents. The 55" Edge will be available by then?



CooHead
... all available at the same time, or roughly the same time. Ben and I shot photos for the 55" Edge manual today (albeit a couple of states apart). I expect that all three will be released before the end of November.

Scott
Oct 26, 2008, 09:26 PM
Team 3DHS
BoneDoc's Avatar
Doc,

I haven't had too much stick time on the 47" Edge, but from the little that I could glimmer, it basically expanded on all of the SHP's low and slow goodness. I can't comment on durability , but harriers, and other things like that are just awesome with the Edge.
Oct 26, 2008, 09:34 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
We expect to have the 55" Edges up for pre-order by the end of this week.
Oct 27, 2008, 10:37 PM
Team Extreme Flight
Doc Austin's Avatar
Are they here yet?


Quote:
Originally Posted by BoneDoc
Doc,

I haven't had too much stick time on the 47" Edge, but from the little that I could glimmer, it basically expanded on all of the SHP's low and slow goodness.
That's going to come in handy with my harrier and hover practise. I've really been working the harriers for awhile and it's actually been a lot of fun. I've seen the video of the little Edge and it looks like it really locks into a groove when you harrier it. Should be a good plane for me. I think it will compliment my SR and Velox really well. Those three seem like they would make a teriffic lineup.
Last edited by Doc Austin; Oct 27, 2008 at 10:44 PM.
Oct 28, 2008, 08:24 AM
Registered User
andy walling's Avatar
Is the 47" Edge designed around a 3s 2200 pack with a light motor and a 13x6.5 prop?

What is the weight of the air frame, if anyone knows? Thanks...
Oct 28, 2008, 08:55 AM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
It's similar in size and weight to the Velox and 47" SHP, and is recommended for 3S 2200mah for a light setup and 4S 2200 for a very powerful setup. I prefer the 3S setup, myself.
Oct 28, 2008, 09:19 AM
Team Extreme Flight
Doc Austin's Avatar
I'm going to go with the Torque 2818 and Thunder Power's new Pro-Lite 2600 packs. They weigh the same as a 2200 Extreme pack, so I'm getting the extra capacity with no weight gain.

I've also got some 3s 2200 extreme packs that have been laying around since my Mini Ultra Stick days (the dark ages). Since my 3D is getting better, I can probably get away with less punch out power, so I'll give it a shot.

With the 3s I can run a 14/7 because it's starting to get cool out, and that's 2.5 inches more prop than the 11.5/5 I'm running on 4s. That's going to give me a bunch more vectored thrust, and maybe that will keep me from getting into so much trouble to start with.

If I start to get into a heat problem, I can always scale back to a 13.6/5, and that's still a lot more diameter to spread the vectored thrust around. I've run 3s and this prop before, and even in the Florida summer it's a very safe combination.
Last edited by Doc Austin; Oct 28, 2008 at 09:24 AM.
Oct 29, 2008, 09:04 PM
Scott Stoops
sukhoi26mx's Avatar
New 47" Edge video

https://www.rcgroups.com/forums/show...0#post10839555

Lots of hijinx (Ben), great videography (thanks Ryan!), and average flying by yours truly.

Scott
Oct 29, 2008, 09:19 PM
ExtremeFlight - 3DHS - Legacy
blucor basher's Avatar
HA! Nice. You need to go lower in the blender next time. I didn't see any grass in the elevator balances.
Oct 29, 2008, 10:37 PM
Like a boss!
AllBread's Avatar
I told you it wouldn't be low enough for him!
Oct 29, 2008, 11:35 PM
Test your skills....fly IMAC!!
sun.flyer's Avatar
Quote:
Originally Posted by sukhoi26mx
New 47" Edge video

https://www.rcgroups.com/forums/show...0#post10839555

Lots of hijinx (Ben), great videography (thanks Ryan!), and average flying by yours truly.

Scott

Really nice flying Scott. Your DOD TR's were definately worth watching the video twice. Very impressive.

Tim
Oct 29, 2008, 11:42 PM
Fly Low or you'll never know!
RC4x4's Avatar
Nice flying Scott.
Good job at filming Ryan.

I think you have been lower Scott.


Cory
Oct 30, 2008, 01:28 AM
Team 3DHS
BoneDoc's Avatar
Awesome flying Scott... I wish I could fly average like you someday .

Gotta love the commentary also .
Oct 30, 2008, 03:07 AM
Registered User
andy walling's Avatar
How does the 47" edge compair to the Velox as far as no wing rock in upright harrier and ease of hovering. Looks pretty solid in the video but that's with Scott flying it.

He can hover a 747. Thanks...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 3D Hobby Shop 47'' Yak 54 Get Real 3D Flying 1869 Aug 11, 2011 08:39 PM
Article 3D Hobby Shop 47'' Yak 54 ARF Review Get Real 3D Flying 21 May 29, 2011 11:00 PM
Discussion 3D Hobby Shop 47" Katana sukhoi26mx 3D Flying 1279 Jul 31, 2010 08:41 PM
Discussion 3D Hobby Shop 47" Extra 300 SHP sun.flyer 3D Flying 8726 Feb 29, 2008 09:58 AM
Video 3D Hobby Shop 47" Extra SHP sukhoi26mx Electric Plane Talk 4 Mar 12, 2007 09:19 PM