Thread Tools
This thread is privately moderated by gp125racer, who may elect to delete unwanted replies.
Old Oct 19, 2008, 08:31 PM
gp125racer is offline
Find More Posts by gp125racer
Lipo abuser ... smoke on!
gp125racer's Avatar
Gallery

CMPro A6M Zero (.50)


My first electric conversion is completed. I successfully maidened it on Thursday 16 October, 2008. I chose this kit after seeing photos of it here on rcgroups.

The first thing I noticed about the kit was the quality of the fiberglass work for the $120 I paid for it from akmodels. Alex provided great customer support, and answered all the pre-sale questions I had in a timely fashion. This being my first kit of this size, Ill say the included hardware kits are of decent quality. I ended up using most of them, with the exception of a few screws nd fasteners.

The plane is powered by a turnigy 50-55B motor, spinning a Master Airscrew (MAS) 11x7 prop. 80A Turingy Plush ESC, 6s 4400mah packs (4x 3s 2200) positioned 2 in cowl area, 2 behind firewall. Fixed gear, as I hate fiddling with mechanical retracts (all retracts for that matter).

Maiden flight was a success, with the exception of the landing whcih resulted in bent gear. Result of pilot error (way too much speed on approach).
RCG Plus Member
Latest blog entry: D100
Sign up now
to remove ads between posts
Old Nov 07, 2008, 12:58 AM
jamesdr is offline
Find More Posts by jamesdr
Unrepentant Carnivore
jamesdr's Avatar
Nice! CMP has well finished models although they tend to be a handfull in the air. How was the speed with the setup?

Jim
Old Nov 09, 2008, 05:21 AM
gp125racer is offline
Find More Posts by gp125racer
Lipo abuser ... smoke on!
gp125racer's Avatar
Howdy Jim!

The speed was good, I'd say 60-70mph range with the 3 bladed prop. I just like how it looks with the 3 blades, otherwise I'm certain we could get more if I were willing to run a 2 blader

Don
RCG Plus Member
Latest blog entry: D100

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Looking for Mitsubishi A6M Zero 3-Views KSU Flyer Scale Kit/Scratch Built 5 Jul 18, 2008 10:50 PM
Mitsubishi A6M Zero JetTech Parkflyers 6 Nov 01, 2004 10:53 AM
Whoops! A6M Zero, 26.5" to start with! Adrian Britton Scale Kit/Scratch Built 91 Sep 07, 2004 08:50 AM
a6m Zero...My new 80oz toy!!! Henry V Slope 23 Jul 01, 2004 04:04 PM
Turning back the hands of time: A6M Zero in the Park genovia Parkflyers 30 Jun 29, 2003 07:58 PM