GWS NARO Super Digital servo 4Kg-cm 0.068Sec. at 6.0V - RC Groups
Thread Tools
Oct 07, 2008, 12:02 AM
Houng-wen Lin
GWS4CEO's Avatar
Discussion

GWS NARO Super Digital servo 4Kg-cm 0.068Sec. at 6.0V


GWS NARO Super Digital servos will be the highlight for next few shows!

A NARO Super D with metal gears weight 19g.

She will give 3.6Kg-cm 0.077Sec. at 4.8V;

4Kg-cm 0.068Sec. at 6.0V.

Many other in NARO size will be also up grade to be digitalized.

So, guys with this better performance from GWS NARO Super Digital servo, 3D flight can be more wild to do!

More information pls ask: service@gws.com.tw

Business inquiry: export@gws.com.tw
Sign up now
to remove ads between posts
Oct 15, 2008, 07:45 PM
Houng-wen Lin
GWS4CEO's Avatar
I hope GWS NARO Digital servos will set a new mile stone for RC servos industry again.

Although the copy cats will follow GWS pretty soon!

Wish the spec as below will be OK for you guys?

Oct 15, 2008, 11:46 PM
Registered User
From hobbies I started getting kits in Japanese, then German, now Chinese. So your chart actually is understandable to me, at least I think it is.
Oct 16, 2008, 05:16 AM
Gloves are awkward
ipjodan's Avatar
HS65MG's measure 12 x 24 x 24 mm at 11.2 grams

GWS super D's measure 12.7 x 27 x 26.65 mm at 19 grams

Dont think they will fit my rex without frame mods.

Im sticking with the Hitec's
Oct 16, 2008, 05:26 AM
LaurenceGough's Avatar
...
Last edited by LaurenceGough; Oct 21, 2008 at 03:42 AM.
Oct 16, 2008, 06:02 AM
Registered User
R.Lim's Avatar
Quote:
Originally Posted by Technex
I wouldn't buy anything from these guys, they like to spam though MSN messenger.
Use and install "anti spam"
Or run a "Mac" pc, then you will be freed from that nasty things
Oct 16, 2008, 06:19 AM
LaurenceGough's Avatar
...
Last edited by LaurenceGough; Oct 21, 2008 at 03:42 AM.
Oct 16, 2008, 01:59 PM
Houng-wen Lin
GWS4CEO's Avatar
Quote:
Originally Posted by Technex
I wouldn't buy anything from these guys, they like to spam though MSN messenger.
Sorry, I don't use MSN for promotion.

You can refuse to use GWS faster servo! Stay with whatever you like.

But the other smart flyer will find what is better for them. So, they can practice more tuff actions for 3D.

GWS NARO SUPER D will be the best for 400~500 helicopter!

Yet, May be GWS NARO SUPER F D can move faster by trade from torque. Could be 3 Kg-cm to earn 0.5 sec at 6V.
Oct 16, 2008, 02:03 PM
Houng-wen Lin
GWS4CEO's Avatar
Quote:
Originally Posted by ipjodan
HS65MG's measure 12 x 24 x 24 mm at 11.2 grams

GWS super D's measure 12.7 x 27 x 26.65 mm at 19 grams

Dont think they will fit my rex without frame mods.

Im sticking with the Hitec's
HS65MG's measure 2.2kg-cm 0.11sec

GWS super D's measure 4Kg-cm 0.065sec.
Oct 16, 2008, 02:13 PM
Houng-wen Lin
GWS4CEO's Avatar
A closer ref. with GWS SUPER D in Hi-tec should be:

HSG-5085MG 3.5Kg-cm 0.14sec 29X13X30mm at 21.3g $???
GWS super D 4Kg-cm 0.065sec. 27 x 12.7 x 26.65 mm at 19 grams $30 only!

GWS metal gears cut by Swiss machines! Accurate and less backlash.

What will be your choice?
Oct 16, 2008, 02:36 PM
Registered User
R.Lim's Avatar
Quote:
Originally Posted by Technex
Huh? Another classic Mac user I presume...
Yes indeed, just because I don't have to install any anti virus at alllllll
Oct 16, 2008, 02:40 PM
Registered User
R.Lim's Avatar
Quote:
Originally Posted by GWS4CEO
A closer ref. with GWS SUPER D in Hi-tec should be:

HSG-5085MG 3.5Kg-cm 0.14sec 29X13X30mm at 21.3g $???
GWS super D 4Kg-cm 0.065sec. 27 x 12.7 x 26.65 mm at 19 grams $30 only!

GWS metal gears cut by Swiss machines! Accurate and less backlash.

What will be your choice?
Hi,
I am using S9254 and S9257 for the rudder servo.
Can you tell me the improvement when I use your servo, GWS Super? Convince me please
Oct 16, 2008, 03:48 PM
LaurenceGough's Avatar
...
Last edited by LaurenceGough; Oct 21, 2008 at 03:42 AM.
Oct 17, 2008, 10:49 AM
Houng-wen Lin
GWS4CEO's Avatar

The plastic gears GWS NARO size digital servos cost you only $20. :)


Quote:
Originally Posted by R.Lim
Hi,
I am using S9254 and S9257 for the rudder servo.
Can you tell me the improvement when I use your servo, GWS Super? Convince me please
S9254 is a standard size servo weight 49g! 3.4kg 0.06sec at 4.8V plastic gears 40X20X36.6mm

S9257 26g 2.0kg 0.08sec at 4.8V plastic gears 35.5X15X28.6mm

GWS super D 4Kg-cm 0.065sec. at 6V metal gears cut by a Taiwan vendor who makes camera gears for Japanese name brands using Swiss euipments mechined!

GWS super D 3.6Kg 0.077sec at 4.8V 27 x 12.7 x 26.65 mm at 19 grams $30 only!

The plastic gears GWS NARO size digital servos cost you only $20.

How much are you paying for those S9254 and S9257? Yet, Futaba didn't say that is analog or digital amp?
Oct 20, 2008, 06:59 PM
Houng-wen Lin
GWS4CEO's Avatar
Dear Mr. R. Lim, I am waiting your opinions feed back about what I checked for you.

Hope that will help.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion GWS Naro HP-BB servo at 6V? robins22 GWS (Grand Wing Servo) 4 Jan 20, 2010 11:36 AM
EBAY - Sanwa Digital Servo 13Kg:cm hassro Boats (FS/W) 0 Feb 28, 2005 06:32 PM
EBAY - Sanwa Digital Servo 13Kg:cm hassro Cars - Cars and Parts (FS/W) 0 Feb 28, 2005 06:30 PM
F/S:[GWS ICS-300 ESC][3-GWS Naro HP/BB Servo's][GWS Naro STD Servo] LESLIEx317537 Aircraft - Electric - Airplanes (FS/W) 3 Jun 15, 2004 05:19 PM
FS: GWS Naro BB HP Servo - $12.50 shipped in U.S. LESLIEx317537 Aircraft - Electric - Airplanes (FS/W) 0 May 03, 2004 11:09 PM