Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by AirX, who may elect to delete unwanted replies.
Oct 21, 2009, 06:55 AM
EDF rules... :)
AirX's Avatar
Hi Matt,

I am wokring on it...
I want to get the fuselage closed up before taking pictures of it again...
I still need to glas the radome for the fusleage, so it will be this week.

Eric B.
Sign up now
to remove ads between posts
Oct 28, 2009, 06:18 PM
EDF rules... :)
AirX's Avatar
Just adding pictures of the fuselage halves. Took a few days to get time with the software for the new camera.

Eric B.
Nov 15, 2009, 07:53 PM
EDF rules... :)
AirX's Avatar
Bought the rest of the servos and control hardware I need to finish this today. Will try and get more done this week.

Eric B.
Dec 05, 2009, 10:02 AM
Registered User

Opinion !


Hi Eric !

Thanks again for your help. Just had a look at your Blog and thought you might appreciate an opinion on your plane.

Superb design - vaguely reminds me of a Sabre ! ! !

Very nice and super sleek profile.

Regards . . . Eddie.
Dec 05, 2009, 06:44 PM
EDF rules... :)
AirX's Avatar
Hi Eddie,

The little D-model is coming along a little at a time. I do have more things to take pictures of to show. Might get to that tomorrow. Thanks for giving me a little boost to finish it.

Eric B.
Dec 12, 2009, 03:43 PM
EDF rules... :)
AirX's Avatar
Here is a couple pictures of the bonded fuselage. I spackled it, will sand it before adding the wings and stab.
You will notice the fixture under the fuselage, it is designed to set the wing, stab, and thrust line to the exact angles I used in the design.

Eric B.
Last edited by AirX; Dec 12, 2009 at 03:46 PM. Reason: added information
Dec 13, 2009, 06:43 PM
EDF rules... :)
AirX's Avatar
I put the nose on the airframe, and spakled and sanded most of it. Still needs a little work. The weight is 4oz ATM, all the parts on the scale shows about 7oz including battery.

Eric B.
Jan 03, 2010, 05:39 PM
Registered User
That thing looks nice!!
Jan 03, 2010, 06:49 PM
EDF rules... :)
AirX's Avatar
Hi son, good to see you posting..
I need to put the new pictures of what I have done since last posting.
If I feel better tomorrow I will find the camera and post them.

Eric B.
Jan 24, 2010, 09:39 AM
EDF rules... :)
AirX's Avatar
Tested the fan for installed thrust. The test stand thrust was ~5oz(5300 motor on 3s) the installed thrust came out @3.1oz this is with no cheaters.

Eric B.
Jan 25, 2010, 09:25 PM
Supersonic hover
Esprit440's Avatar
Not bad, I was getting about the same with my dud-tastic Sharpshooter which had a 5800 in it.

Is the fan pretty quiet tucked away in the fuse? I guess I'll have to wait for a maiden video to find out.

-Matt
Jan 25, 2010, 10:32 PM
EDF rules... :)
AirX's Avatar
Not as quiet as a straight thru inlet would be. This one has a little ess to it. Well at least I have a camera to take the video with now...

Eric B.
Feb 18, 2010, 05:37 PM
EDF rules... :)
AirX's Avatar

Update 02-18-2010


Well I have been working on the little F86D. Here are a couple of pictures of it. I have a canopy carved out for it but need to get some magnets to hold it, I should get some this weekend.

Eric B.
Feb 18, 2010, 08:40 PM
Supersonic hover
Esprit440's Avatar
Yeah this is a nice looking bird! Did you decide on a paint scheme yet?

-Matt
Feb 19, 2010, 06:46 AM
EDF rules... :)
AirX's Avatar
I am thinking of making it a "Texas ANG" scheme. I want to fly it first, I think the paint might put a little weight on it....

Eric B.

Thread Tools