Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Apr 08, 2009, 03:56 PM
RC_Kiwi is offline
Find More Posts by RC_Kiwi
Registered User
In was hoping to plug in separate servos. What i've done is swapped the Y lead to the flaps and changed the side of the servo arm . they move but I am going to have to shift the control horn. The push rod is on awkward angle at the moment. Thanks for your help anyway.
Last edited by RC_Kiwi; Apr 08, 2009 at 03:57 PM. Reason: Typo
Sign up now
to remove ads between posts
Old Apr 09, 2009, 01:00 PM
FlattyFlier is offline
Find More Posts by FlattyFlier
Team LightRC
FlattyFlier's Avatar
You'll probably have to put a 30* bend in the last inch of teh push rod so that it doesnt bind and hit the servo hatch cover. This shoudl all be covered in your manuel, if not, download the big one's manuel.
Old Apr 15, 2009, 10:31 PM
RC_Kiwi is offline
Find More Posts by RC_Kiwi
Registered User
Is that on the servo side or the control horn side? Thanks

KIWI
Old Apr 15, 2009, 11:37 PM
FlattyFlier is offline
Find More Posts by FlattyFlier
Team LightRC
FlattyFlier's Avatar
Nearest the servo arm.

If you can post a pic or two I can help you much better.
Old Apr 01, 2010, 05:06 PM
miramarrcf is offline
Find More Posts by miramarrcf
the one and only
for my rv-4, i have a y for alerons, and a reversible y for flats, the y for flaps are like $10, but with a flip of a switch, they go down the same way, and have a screw you turn for fine tuning
Old Feb 01, 2013, 01:46 AM
FlattyFlier is offline
Find More Posts by FlattyFlier
Team LightRC
FlattyFlier's Avatar
Had a couple PMs about this old bird so I found the thread. Bump to the top for the guys.

I sure miss this plane. The 91 was perfect power for scale flying but always kept me wanting more. The lights were disappointing. Strobes burnt out after just a few times flying with them and the rest of the lights weren't bright enough to see well enough unless it was pitch black out but then without a landing light orientation was hard and you can't see the runway. I did add landing lights just before I sold it. Never got to try them out.

I'm sure with LEDs nowa days it would be an easier mod and with better results but I wouldn't recommend it on a plane this size unless you have a lit runway or a friend with a spot light to lead the plane a bit.

I would really like to have another with a 20cc or 1.20 4 stroke


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion LD-4 Design and Build Thread Tom Harper Modeling Science 139 Dec 14, 2009 07:59 AM
Hydrofoam XXX Semi-scale- build thread dougmontgomery Foamies (Kits) 6 Aug 22, 2008 05:00 PM
LD-4 design and build thread under Modelling Science Arthur P. Aerial Photography 1 Jun 27, 2005 04:01 PM
Yippee! Greatplanes RV-4: Great parkflyer!!! J.Paul Parkflyers 7 Apr 21, 2005 08:53 AM
RV-4 building and flying thread jhawk169 Parkflyers 0 Nov 02, 2003 02:12 PM