Flasher 450 Helicopter - RC Groups
Thread Tools
This thread is privately moderated by bwoollia, who may elect to delete unwanted replies.
Sep 22, 2008, 11:03 PM
bwoollia's Avatar

Flasher 450 Helicopter

About the Helicopter
The Flasher 450 is a parts compatible clone of the Align T-Rex 450SE V2. It is constructed of a carbon synthetic fiber frame with CNC head and tail components. This is only my second helicopter, the first being a Blade CP Pro, so you may have to bear with my limited knowledge as I try to pass on my experience with this helicopter!

The Kit
I ordered the ARF version of this helicopter, which included everything you need, minus transmitter and receiver. The helo came kitted out with a generic (I think) gyro, motor, servos and 2200mAh LiPo battery. Everything came packed in a nice aluminum carrying case, which is a great convenience! The connectors were all hooked up except for the servos to the head. All this for $299 shipped!

Not much to say here. I had to program my DX6i radio to work with the helicopter, most of the information from that came from the radio's manual with a little help from Google and RCGroups. The fiberglass blades were well balanced, and required only a turn and a half or so to adjust tracking.

The overall quality of the kit seemed very high. Without having much experience with helicopters this model seemed well put together with good parts. There were a few concerns - the manual said that the motor should have a 12 or 13 tooth pinion, however after the motor seemed to bog down at high pitch I counted the teeth and I had a 14 tooth pinion. A quick phone call and some replacement pinions were put in the mail. Generally, the model flew well (much more stable than my Blade CP Pro!) with only minor trim. The gyro seems to hold heading very well, I'm sure there are better gyros out there you can upgrade to. I don't have much to compare it to, but the Flasher 450 seems very stable and responsive. It has flybar weights which can be positioned or removed to adjust the responsiveness. These came positioned at the outer position for the most stable flight out of the box.

I did have an inflight malfunction however! After flying a dozen or so batteries in the backyard, I took the model to my local flying field to try some level flight. It flew very well, until I got some uncommanded pitching up. I recovered a couple of times, however I was unable to land following a third occurrence and the model piled in. OUCH! A quick investigation revealed that the pitch servo was coming loose - one of the screws was missing and the other was loose. I was ANNOYED! Lesson learned however - checking for vibration while the spooling up is NOT a sufficient pre-flight. From now on I'm wiggling stuff and poking around before I lift off! I'm in the process of replacing all the servos with the trusty HXT-900, and I'll bolt them all down more securely from now on!

I'll put up some new photos when I get it all put back together. Overall, I'm impressed with this model, aside from the servo installation.
Latest blog entry: Crash Compilation
Sign up now
to remove ads between posts
Nov 16, 2008, 09:39 AM
Any new info on this bird? Would like to hear more about it.
Nov 16, 2008, 11:23 PM
Glider-man's Avatar
yeah tell us more pls!
Nov 17, 2008, 01:34 AM
bwoollia's Avatar

Bird is flying great. Check my YouTube page shortly for some forward flight action.

My general impression - still very happy with the helo. The "experts" at the field are impressed. It's essentially a T-Rex 450SE V2, the parts are of very good quality and fit together well. Compatibility seems good, although my major repair used CopterX parts.

The only parts that I don't think are of good quality are the servos and gyro (if you buy the electronics included kit). The gyro works okay, but is has a very fussy heading lock mode. You'll likely want to upgrade it. The motor and ESC seem good - ESC programs with a Turnigy programming card.

It seems to be holding together well! I haven't done the whole thing in Loctite yet (yes, I know I'm asking for it). Purchased from SN Hobbies.
Latest blog entry: Crash Compilation
Nov 17, 2008, 02:06 AM
Glider-man's Avatar
Thanks for that...!

Sorry to hear its needed repairs.. what broke and did it break easily?
Nov 17, 2008, 02:30 AM
Glider-man's Avatar


We have a pro!

How long have you been flying helis????! (you say you're an amateur)
Because in your movie that was like..., wellll... I don't know.... maybeee....... COMPLETELY PRO!!!!!!!!!!!

You know we have a bit in common, ...

I have a RCPowers plane (actually 2) so do you.
I wanted a Flasher 450, and you have one...
When i first saw the Flasher i said to my self I'll trade those servos for HXT 900's! And you did...

Keep up the good fliying!
Nov 17, 2008, 12:04 PM
bwoollia's Avatar
Actually - only been flying RC for a few months. Started while I was on a course away from home this summer (learning to fly full-sized military helicopters). I had flown some RC gliders and control line when I was much younger, and I'm just getting back into it. If you want to get better with the helis, get a sim! HeliSimRC is free and works well - I can't recommend it enough. If it weren't for that, the Flasher would be in pieces right now!

Thanks for your comments, good luck with your new helo if you get it!
Latest blog entry: Crash Compilation

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New Flasher 450 Helicopter f-14volador Mini Helis 8 Sep 02, 2009 10:52 PM
Question Hone 450 Helicopter Parts? sircrashesallot Mini Helis 13 Jul 19, 2008 07:52 PM
Discussion Kyosho Caliber 450 Helicopter flying video Michael Heer AMA Expo 0 Jan 23, 2008 11:27 PM
Discussion new 450 helicopter from China gblqc Electric Heli Talk 7 Mar 10, 2007 01:01 PM