Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by nephewkp, who may elect to delete unwanted replies.
Aug 26, 2008, 10:20 PM
Trader Rating: 5
lurking above the clouds

Turnigy Plush 60amp esc w/ programmer, Turnigy aerodrive C3548-800kV w/ spare shaft

I decided to run my supercub with the stock motor/gb so I am selling the motor and esc that I used to mod it.

I am selling the following:
Trunigy Aerodrive C3548-800kV motor with stock 3mm male bullet connector soldered on. I am including a spare shaft, mounting bracket, and prop shaft fitting w/spinner. The motor is in good condition with about 10 flights on it. the last flight with it ended up landing the plane on the roof of the radio shed following a failure of the sc wing (was flying too fast and folded the wing) so there is a little shingle tar on the spinner. $25 shipped

Turnigy Plush 60amp ESC with programming card. It has male Deans on it for power, and 3mm female bullet connectors that match the bullet connectors on the motor listed above. I also added some lengths of silicone insulated wire to the motor side of the esc to make it long enough for my installation. Flown for only 10 flights. The programming card allows you to instantly program the esc (including startup music) without using troublesome radio inputs. $40 shipped

I will sell all together for $60 shipped.

Sorry for the quality of the pics, my digital camera decided to stop taking photos. If I get it working, I will update with better quality pics. I have the stuff boxed and ready to go, so shipping will be fast.
Sign up now
to remove ads between posts
Aug 26, 2008, 11:45 PM
Trader Rating: 193
JSF pilot
flyingrandy55's Avatar
Was the motor run after the crash? Any wobble in motor shaft?

Aug 26, 2008, 11:59 PM
Trader Rating: 57
Registered User
Fune's Avatar
Pm sent
Aug 27, 2008, 07:47 AM
Trader Rating: 5
lurking above the clouds
Originally Posted by flyingrandy55
Was the motor run after the crash? Any wobble in motor shaft?

I ran the motor after the crash and it is fine. There a spare shaft included, so even if it was bent, you have everything you need to fix it.
Aug 27, 2008, 08:48 AM
Trader Rating: 43
I will take the ESC @ $40 shipped if still available. Let me know!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Turnigy Plush 80A esc problem jpinn Power Systems 12 Sep 05, 2009 10:14 AM
Sold **NIB Turnigy Plush 60amp ESC with program card. Free shipping!!** ronrandle Aircraft - Electric - Power Systems (FS/W) 1 Jul 08, 2008 09:14 PM
Sold Turnigy Plush-100A ESC NIB RV-4 flyer Aircraft - Electric - Power Systems (FS/W) 5 Apr 28, 2008 07:33 PM
Question Turnigy Plush 40A ESC - auto cell detect? pardus Power Systems 1 Mar 07, 2008 02:05 PM
( eolo setup ) mega 22/20/2 & ccs 60amp esc w/ pinion set ralphyfly Aircraft - Electric - Airplanes (FS/W) 2 Apr 26, 2004 08:21 PM