Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Aug 17, 2008, 12:42 PM
paulyboy is offline
Find More Posts by paulyboy
Registered User
Question

Hardwire or Plugs??


i just recieved my ammo motor and thunder-bird esc ...the motor has plugs but the esc doesn't..should i hard wire them, or find a set of plugs for both of them..........or could you tell me the plugs to get for the esc that will fit the motor plugs.

thanks, paul
Sign up now
to remove ads between posts
Old Aug 17, 2008, 01:40 PM
pompebled is offline
Find More Posts by pompebled
Boaters are nice people.
Most motors come with a set of (female) plugs, you can solder onto your ESC.

In some pics the vendor has put them onto the males, so it looks a solid piece of brass, I'd check and if there's nothing, ask the vendor to get you some for free.

Regards, Jan.
Old Aug 17, 2008, 03:45 PM
paulyboy is offline
Find More Posts by paulyboy
Registered User
what do you mean by vendor,,,the place i ordered it from or the manufacturer?
Old Aug 17, 2008, 05:07 PM
pompebled is offline
Find More Posts by pompebled
Boaters are nice people.
Quote:
Originally Posted by paulyboy
what do you mean by vendor,,,the place i ordered it from or the manufacturer?
Both, the manufacturer 'should' provide them with the ESC, otherwise the vendor should add them as 'service'.
These connectors are usually sold in pairs. (male + female)

Just give it a try.

Otherwise take a caliper and measure the connectors diameter to know which connectors you need.

Regards, Jan.
Old Aug 17, 2008, 07:21 PM
paulyboy is offline
Find More Posts by paulyboy
Registered User
problem solved...found some pugs that will fit it


Thread Tools