Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 23, 2008, 10:55 PM
B.A.P is offline
Find More Posts by B.A.P
Registered User
Discussion

is there a brushless motor for a rc10 t3???


i just found a old rc10 t3 in my closet and i am starting to fix it back up but i just relized the engine was burnt out

so i was just wondering if there was a brushless motor that i could use and if so where can i get one for cheap

thanks for your help

-blake
Sign up now
to remove ads between posts
Old Jul 23, 2008, 11:28 PM
igotit is offline
Find More Posts by igotit
Registered User
no brushless setup is cheap man,your looking at almost $200 for a 1/10 sized brushless motor esc combo! your converting a nitro to electric,you will have to fabricate a motor mount,and put a different pitch gear setup on the tranny.iv done 5 brushless conversions from old nitro cars and trucks,nothing is cheap unless you can find esc motor combo under $100
Old Jul 23, 2008, 11:28 PM
igotit is offline
Find More Posts by igotit
Registered User
it would be cheaper and more efficent to buy a vxl rustler for under $300
Old Jul 23, 2008, 11:30 PM
igotit is offline
Find More Posts by igotit
Registered User
is your t3 electric or nitro?
Old Jul 23, 2008, 11:40 PM
B.A.P is offline
Find More Posts by B.A.P
Registered User
electric
Old Jul 23, 2008, 11:49 PM
B.A.P is offline
Find More Posts by B.A.P
Registered User
i also noticed that a brushless motor has 3 connectors and the engine that i have right now only has 2...so would i have to just buy a whole new kit
Old Jul 24, 2008, 12:09 AM
igotit is offline
Find More Posts by igotit
Registered User
you need a brushless esc motor combo,brushless motor requires a brushless esc,your looking at $200 for that,$160 at the lowest,unless you buy no name brand from ebay
Old Jul 24, 2008, 12:10 AM
adamak46 is offline
Find More Posts by adamak46
Adam
adamak46's Avatar
Quote:
Originally Posted by B.A.P
i also noticed that a brushless motor has 3 connectors and the engine that i have right now only has 2...so would i have to just buy a whole new kit
yes

i believe two are for power and the other is for control

kind of like a servo
Old Jul 24, 2008, 12:19 AM
B.A.P is offline
Find More Posts by B.A.P
Registered User
Quote:
Originally Posted by adamak46
yes

i believe two are for power and the other is for control

kind of like a servo
so if i do buy a whole new set up for it, would it be hard to put together because im not the best at working on cars, and this is like my first one that im actually truly putting together
Old Jul 24, 2008, 12:26 AM
igotit is offline
Find More Posts by igotit
Registered User
2 bolts for motor,install pinion and plug in esc to the reciever! simple!
Old Jul 24, 2008, 12:46 AM
B.A.P is offline
Find More Posts by B.A.P
Registered User
alrite so which motor would you suggest
Old Jul 24, 2008, 01:08 AM
adamak46 is offline
Find More Posts by adamak46
Adam
adamak46's Avatar
Quote:
Originally Posted by B.A.P
alrite so which motor would you suggest
novak motors are a good place to start link

and castle creations is my favorite link
Old Jul 24, 2008, 01:42 AM
igotit is offline
Find More Posts by igotit
Registered User
castle creations is the best start,good quality great value,awesome performance.
i use the traxxas vxl system,but id prefer a castle esc with the vxl motor!
Old Jul 24, 2008, 02:18 AM
TheTick is offline
Find More Posts by TheTick
Spoooooon!
TheTick's Avatar
I would just get this controller for $45 and one of their $20 motors. I'm using one of their xl motors and 100 amp controllers in my revo and it hauls.

http://www.hobbycity.com/hobbycity/s...verse_programm.
Old Jul 24, 2008, 02:24 PM
B.A.P is offline
Find More Posts by B.A.P
Registered User
Quote:
Originally Posted by adamak46
novak motors are a good place to start link

and castle creations is my favorite link
i think im going to go with the castle creations


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Is there a brushless motor for the Honey Bee CP, Hummingbird CP, etc? Tumbler Micro Helis 0 Mar 20, 2006 10:03 AM
Which brushless motor for Kyosho Spacewalker Michael in Toronto Electric Plane Talk 11 Jan 04, 2002 01:06 AM
Which MEGA brushless motor for LMH/Corona? Tom Viper Electric Heli Talk 5 Dec 29, 2001 10:35 AM
Brushless Motor for The Sky Scooter? Coyoteair Sport Planes 3 Oct 15, 2001 11:55 AM
jetti brushless motor for ecco8? johnpmartins Electric Heli Talk 7 Aug 06, 2001 09:26 PM