Re-work of Sky-Cat completed - RC Groups
Thread Tools
This thread is privately moderated by jokeane, who may elect to delete unwanted replies.
Jul 21, 2008, 10:02 AM
"Spark Chaser"
jokeane's Avatar

Re-work of Sky-Cat completed

So I did a pretty significant re-work of the Sky-Cat after getting it home from the maiden flight. Found out that the glue I used for some of the assembly just wasn't working well at all. (Ultimate R/C Foam glue - go figure. Seems to work well on blucore and depron, but not Elapor.)

So I tore much of the plane apart, cleaned off the offending glue, repainted some spots and re-assembled it. For the re-assembly I used medium viscosity CA and kicker. This worked VERY well. All the Elapor joints feel much more solid. Also added a magnet for the battery hatch. I re-hinged the ailerons, I'm much happier with this hinging job than the last.

I dropped the prop down to an APC 11x8 - just to try it out for the next flight.

So it is all set for next flight. Weather seems crap today, but we shall see.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Multiplex Sky Cat babblefish Foamies (Kits) 35 Nov 03, 2003 11:07 AM
9.6V 800mAh Ni-MH Battery pack re-work Dmerino Batteries and Chargers 5 May 11, 2003 12:10 PM
I'm looking for Sky Cat info... Luigi Fuel Plane Talk 1 Oct 22, 2002 12:09 PM
Servo re-work rlt55 Power Systems 13 May 27, 2002 10:27 PM
Info on the new Multiplex Sky Cat ? PaulC Sport Planes 0 Mar 22, 2002 10:16 AM