New Products Flash Sale
Thread Tools
Old Jul 16, 2008, 06:01 PM
trinitygirl is offline
Find More Posts by trinitygirl
I Fly Kernow
trinitygirl's Avatar
Help!

crappy walkera 52 landing skids


hi all you guys out there can you help a girl with a problem, I am fairly new member to this group, I am currently flying a walkera52 heavily modified but since the all up weight of my girl as gone up to 176 grams due to the slot motor and stainless steel chassis i seem to be going through landing skids like they are going out of fashion. My heli as plenty of power and a good run time on the original lipo, i am flying with mad dog blades on the standard pinion supplied with the origanal motor, but anything other than a really soft touch down snaps the legs like butter.

can any of you guys out there recommend a better quality more flexable landing gear that will fit the walkera.
Sign up now
to remove ads between posts
Old Jul 16, 2008, 06:04 PM
tonyastro is offline
Find More Posts by tonyastro
3D VFX Artist
tonyastro's Avatar
http://www.micro-flight.com/Walkera%2052.htm

But that's a full frame upgrade. Yes I know what u mean. I snapped the right skid trying to hover, taped it back, hovered about 4 ft then snapped the left skid.
Old Jul 16, 2008, 06:08 PM
tonyastro is offline
Find More Posts by tonyastro
3D VFX Artist
tonyastro's Avatar
Since you already have a frame try this:

http://www.micro-flight.com/products.htm

Where did u get yr ss chassis?
Old Jul 16, 2008, 06:24 PM
trinitygirl is offline
Find More Posts by trinitygirl
I Fly Kernow
trinitygirl's Avatar
Hi tonyastro, Thank you. I used to work in engineering as a technician but i am now dabbling in glass and jewellery making so easy to put my skills to making a chassis, its just a bent up plate i am using the origanal side plates with the base section modified to enable a flat long full width s/s chassis its worked fine for a while now and put up with a lot of abuse from me i will see if i can post a pic for you
Old Jul 16, 2008, 06:55 PM
trinitygirl is offline
Find More Posts by trinitygirl
I Fly Kernow
trinitygirl's Avatar
Hi tonyastro one pic of modified chassis i have looked at your link thanks, looks promising but will have too find out the costs for shipping.

ps in the pic you will see i have lost most of the undergear but just finished a good flying session before darkness stopped play.
sorry its not a good pic but camera is a cheepy.
Old Jul 16, 2008, 07:06 PM
tonyastro is offline
Find More Posts by tonyastro
3D VFX Artist
tonyastro's Avatar
Where do you live. If you get it here:

http://www.rchobbyhelicopter.com/sto...#%20Helicopter

cost of shipping is $8 flat for U.S. Both sellers are regulars on this site. MarioIArguello and johnIn2SonAZ.
Old Jul 16, 2008, 07:23 PM
SebastianJ is offline
Find More Posts by SebastianJ
Droner
SebastianJ's Avatar
I use 5#10 skids on my 52#, a little beefier, super cheap and you only have to drill 4 holes for them to fit.

Walkera 52# brushless 2.4ghz. (2 min 26 sec)
Old Jul 16, 2008, 07:25 PM
tonyastro is offline
Find More Posts by tonyastro
3D VFX Artist
tonyastro's Avatar
Love that brushless sound. Like drilling teeth
Old Jul 16, 2008, 07:26 PM
trinitygirl is offline
Find More Posts by trinitygirl
I Fly Kernow
trinitygirl's Avatar
hi, bit more expensive for me i am in Cornwall England. but i must say i like the carbon fibre chassis upgrade, and the canopies on that site. I am in the middle of drawing up a full carbon fibre design for my second walkera, should be able to get enough for two from a A5 sheet of robotics grade 1mm carbon fibre for around 20.00 about 38usd
and thanks for the info byw
Old Jul 16, 2008, 07:32 PM
trinitygirl is offline
Find More Posts by trinitygirl
I Fly Kernow
trinitygirl's Avatar
hi bas10an nice flying sounds mighty different to mine mine just purrs he he, thanks for your advice will look into that one too, cheers
Old Jul 16, 2008, 09:51 PM
Fuddmeister is offline
Find More Posts by Fuddmeister
Registered User
If you want unbreakable skids then check these -Micro Heli Tuning

I've spent the last 8 or 9 months trying to break mine. They're not cheap when you add the postage, but you will save money in the long run.

The MIA frame kit looks good but he won't ship outside the US
Old Jul 17, 2008, 12:12 AM
sketchaholic is offline
Find More Posts by sketchaholic
Registered User
sketchaholic's Avatar
Quote:
Originally Posted by bas10an
I use 5#10 skids on my 52#, a little beefier, super cheap and you only have to drill 4 holes for them to fit.

http://www.vimeo.com/1104970?pg=embed&sec=1104970
Are the 5#10 skids much more durable? Nice flying by the way.
Old Jul 17, 2008, 04:03 AM
trinitygirl is offline
Find More Posts by trinitygirl
I Fly Kernow
trinitygirl's Avatar
hi Fuddmeister thank you for the info, shame about the Mia frame. I have had a look at micro heli tuning, the skids look cool, will be looking into this a bit more, cheers.
Old Jul 17, 2008, 06:43 AM
SebastianJ is offline
Find More Posts by SebastianJ
Droner
SebastianJ's Avatar
Quote:
Originally Posted by sketchaholic
Are the 5#10 skids much more durable? Nice flying by the way.
Thanks Sketch,

They are OK durable, from around 10-12 pretty hard crashes only one leg broke, I bought three sets of skids and they'll ensure me safe landings the rest of this summer.
And they look way cooler than stock

BTW:
It's a 2 cell setup if anyone should care, plenty power, 7-8 min. from a 500mah pack and 10-12 from a 900mah.
Old Jul 17, 2008, 08:03 AM
hugo-norway is offline
Find More Posts by hugo-norway
Registered User

landing skids


I have also bought the landing skids from micro heli tuning. Works wery well.

Hugo
Norway


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Walkera #52 landing skids for 5#5b rccary Coaxial Helicopters 5 Aug 31, 2007 09:07 PM
Build Log Custom Walkera 52/NR3D Micro skids! shrubba Micro Helis 2 May 17, 2007 05:09 PM
Logo 10, sucuring landing skids rickc Electric Heli Talk 9 Jul 01, 2002 01:06 PM
Logo Landing Skids Steph280 Electric Heli Talk 12 Mar 06, 2002 01:17 AM
Wanted - /30-sized heli landing skids... gstew Electric Heli Talk 3 Dec 29, 2001 06:08 AM