Thread Tools
May 26, 2001, 05:46 PM
Registered User

Foam cutting CNC software


Hi All
I have built a foam cutting CNC. I need the software that will controll the 4 stepper motors that move the XY tables in the correct direction. Does anyone know who makes this software?
Thanks
Sign up now
to remove ads between posts
May 27, 2001, 09:39 PM
Registered User
exempt's Avatar
I thought for sure that I saw some type of CNC software in a Micromark catalog once but upon inspection of my latest catalog I don't see it, they do have a bunch of accesories for this though. I bet if you call them they may be able to point you in the right direction. www.micromark.com
Sounds like a great project! I would love to do something like this someday.

Reagrds,
Scott
May 27, 2001, 11:41 PM
Registered User
Hey foam_man,
Bill Griggs Models carries cnc foam cutting software. http://www.griggsmodels.com/

Scott
May 28, 2001, 01:48 AM
pfg
pfg
Registered User
get a copy of "Nuts and Volts" - its not carried at many places but has exactly what you need - even free software for the actual cutter control. e-mail me if you have trouble and we'll find a way to get you the info. http://www.nutsvolts.com/

[This message has been edited by pfg (edited 05-28-2001).]
Sep 05, 2001, 08:42 PM
Registered User
Far4nugn's Avatar
foam_man, did you ever finish this project? I'm about to start he same thing and would like to know if you found a solution for the software.

I plan to use a pair of (2channel) controllers from www.steppercontrol.com and some small steppers I have around my shop.

Thanks!


Sep 06, 2001, 07:03 PM
Registered User
I actually use a machine similar to what you guys are looking for, but it is a very expensive hardware and software solution for a hobbyist.I can cut foam up to 2" thick. I normaly work with polyethelene, polyurethane and a depron like material. Check out the link to see what it looks like.
http://www.data-technology.com/dt2200.html
Sep 07, 2001, 01:37 AM
ultramega super star
stealthy's Avatar
I purchased a copy from a guy in france, I have the link if your still looking for software. I think the price was around $30-$40, I'm about to build my cnc foam cutter this month along with a cnc router.
Sep 07, 2001, 03:13 AM
Registered User
Hi Foam_man

Would you consider telling us how you built the machine???

Thanks
Stephen

[This message has been edited by wigham1 (edited 09-07-2001).]
Sep 07, 2001, 01:00 PM
Registered User
Far4nugn's Avatar
jrgii, the laser cutting machine on that site is most impressive! wow.

Stealthy, please post a link to the SW site if its not too much trouble.

Thanks!
Sep 07, 2001, 01:22 PM
Registered User
I built this type of foam cutting machine quite a few years ago, and wrote software to run it. It is written in a C like language, if you want to take a look at it. It runs the motors in short, straight paths, which cut a nice smooth path on the machine. To make the whole system work you need a decent CAD program to develop the shapes to cut, a pre-processor(simple Basic program) to convert the shapes into steps/motor, and then the cutter hardware and software.
Sep 08, 2001, 08:50 AM
Registered User
Far4nugn's Avatar
philc, I'd like to try it if thats ok. I was considering doing the same, but I have very little programming experience and only in VB. I use 3D Studio Max to create the shapes, or I can scan a print and 'vectorize' it with other software.

Thank a bunch!
Last edited by Far4nugn; Nov 20, 2012 at 08:26 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Foam Cutting CNC Machine Problems KOBE-DJ Modeling Science 0 Oct 10, 2006 08:59 AM
For Sale Hot wire Foam cutting CNC machine tbarnea Aircraft - General - Miscellaneous (FS/W) 0 Jun 19, 2006 02:42 AM
CNC foam cutting machines and software Intrex The Builders Workshop 2 Dec 01, 2003 05:21 AM
For Sale: foam cutting CNC foam_man Aircraft - Electric - Airplanes (FS/W) 16 Aug 28, 2002 08:41 PM
FS-Foam cutting CNC electronics foam_man Aircraft - Electric - Airplanes (FS/W) 6 Jun 07, 2002 12:46 AM