Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by JimDrew, who may elect to delete unwanted replies.
Old Jan 27, 2010, 01:56 PM
JimDrew is offline
Find More Posts by JimDrew
Xtreme Power Systems
No.
RCG Plus Member
Sign up now
to remove ads between posts
Old Jan 27, 2010, 03:39 PM
tashley is offline
Find More Posts by tashley
Aerial Images of Texas
tashley's Avatar
Doh!
Old Jan 27, 2010, 05:04 PM
JimDrew is offline
Find More Posts by JimDrew
Xtreme Power Systems
Only the Telemetry Stations need to be upgraded when upgrading to v3.x.
RCG Plus Member
Old Apr 11, 2010, 10:56 PM
TheSuper is offline
Find More Posts by TheSuper
I need a nap
TheSuper's Avatar
I am confused.

Why does the $39.95 upgrade say to send in the XDP unit. It says "You must return your transmitter module, receivers, XDP, and telemetry station if you want the full 3.x upgrade."
http://www.xtremepowersystems.net/pr...UPGRADE&cat=10

Am I misunderstanding something.
I'm planning on doing the upgrade since I have firmware version 2.1, 2.3 and 2.4 receivers.
Last edited by TheSuper; Apr 11, 2010 at 11:02 PM. Reason: url
Old Apr 12, 2010, 11:44 AM
JimDrew is offline
Find More Posts by JimDrew
Xtreme Power Systems
You can not upgrade from 2.x to 3.x, we have to do it as it requires a firmware upgrade to the RF module which can never be done in the field. The XDP must also be returned to be upgraded.
RCG Plus Member
Old Apr 13, 2010, 03:47 AM
fsharp is offline
Find More Posts by fsharp
Registered User
so now I should bring my extra XDP back from England for upgrade? it seems to work with 3.xx units at least for settings and flashing
Old Apr 13, 2010, 12:06 PM
JimDrew is offline
Find More Posts by JimDrew
Xtreme Power Systems
If it works with v3.x devices, then it already has the proper RF firmware.
RCG Plus Member
Old Apr 16, 2010, 12:44 PM
JimDrew is offline
Find More Posts by JimDrew
Xtreme Power Systems
New firmware update for receivers! With v3.8 we added the support code for Graupner's telemetry radios so that failsafe positions and types can be set via the transmitter, and also added a reboot notification. If the system reboots after power has been connected, the LED will continously flash orange. During this time, you can't program the failsafe positions and the voltage monitoring will not change the color of the LED - it will always be flashing orange until both the transmitter and receiver are powered off.
RCG Plus Member
Old Apr 16, 2010, 12:55 PM
JimDrew is offline
Find More Posts by JimDrew
Xtreme Power Systems
We released new RxDiag and XDP programs to support the new Nano series receivers. You can download the full installer or use the auto-update function.
RCG Plus Member
Old Apr 16, 2010, 01:03 PM
dennisjm is offline
Find More Posts by dennisjm
Proud RC Addict
Nanos shipped with 3.7 then?

One of these days I'm going to have to buy myself an updater I guess.
Old Apr 16, 2010, 05:34 PM
JimDrew is offline
Find More Posts by JimDrew
Xtreme Power Systems
Nano's have their own firmware version that is separate from the rest of the XtremeLink product line. They shipped with v1.0, Series II.
RCG Plus Member
Old Apr 16, 2010, 07:34 PM
dennisjm is offline
Find More Posts by dennisjm
Proud RC Addict
OK. so Nanos are still in field upgradeable though right, just no reason to upgrade them at this point?

I just got my 3 nanos in the mail. If I hurry I can fly a shelved plane before the end of the day
Old Apr 17, 2010, 03:44 AM
micmac is offline
Find More Posts by micmac
Registered User
I, having a problem during the update 3.8 i got a error. Now my 6 channel receiver is not working anymore what can i do?? i used the updater21.exe
Is there a recovery mode?
Old Apr 17, 2010, 06:06 AM
rbachmann is offline
Find More Posts by rbachmann
speed-boater
rbachmann's Avatar
Quote:
Originally Posted by micmac View Post
I, having a problem during the update 3.8 i got a error. Now my 6 channel receiver is not working anymore what can i do?? i used the updater21.exe
Is there a recovery mode?
press the shift key while searching for receiver devices and try the flash update again.

that worked fine for me. i had the same problem. See here.

Roland
Old Apr 24, 2010, 10:36 AM
Guiga is offline
Find More Posts by Guiga
Registered User
Quote:
Originally Posted by JimDrew View Post
New firmware update for receivers! With v3.8 we added the support code for Graupner's telemetry radios so that failsafe positions and types can be set via the transmitter, and also added a reboot notification. If the system reboots after power has been connected, the LED will continously flash orange. During this time, you can't program the failsafe positions and the voltage monitoring will not change the color of the LED - it will always be flashing orange until both the transmitter and receiver are powered off.
The MX-24 already has this resource?


Thread Tools