Ok, listed in chronological order. But most of what I build, I sell.
Original Honcho SCX10 with a Summit 2 Speed and Novak Havok
RC4WD Gelande D90 with extensive Styrene work and my first tube work
RC4WD Timberwolf that Crawlhog also owned for a while
The US Navy Veteran Berg
My first Hilux build on an SCX10
My second Honcho
My R1, bought built then I did a full rebuild
Lancer SF03Ra Rally Car
My favorite build and still the best runner I had, the JK Brute with a huge amount of Styrene work and tube work
Mississippi Hunting Truck Tribute Build, scratch built drop bed, opening tailgate and dog crate
My Class 1 Hilux on an SCX10, still a work in progress, brushless and rear leafs
My Mighty Mog
I also owned a couple well known trucks but I had no hand in building them.
The Silver Bullet Taco
My stock-ish AX-10 (as it was a few months ago)
Traxxas shocks ,moded the shell and moved the battery..
Now it's a full blown FOFFer..
Modded Proline tuber cage , 8.5t 4000kv Brushless motor/60 amp ESC ,
14t Pinion/54t Spur gears 32pitch , Traxxas Shocks , Traxxas 3.3 Rx box ,
Steel tranny gears and output , JunFac Drive shafts , 3cell 2200mAh Li-Po
Proline SandPaws on Axial moded rims..
New RTR Wraith
So, no one in Burnaby wanted to sell me the crawler I wanted to buy first, the Losi Micro 1/24 crawler. But a window of opportunity opened on Tuesday for me to instead head to the most Local (to me) of my LHS' and buy the RTR wraith that was staring at me.
I blame 4mods.
Took it out and got it dirty, then brought it home and did a few basic mods (moved the battery underneath the battery case to lower CG, moved the rear shocks full forward). Then my family said the crawler needed a driver. By the power of Greyskull I think I found one!
Last edited by Scurvy; Feb 12, 2012 at 10:10 AM. Reason: fixin' pictures.
Axial SCX Chassis.
Axial SCX/AX-10 Gearbox with HR steel Gears , Robinson Racing OutDrive.
Axial Spur gear cover (AX80078).
Axial SCX/AX-10 Axles.
Axial Over Drive 63t/14t Gears (AX30401) Front/Rear.
Axial SCX High Mount body post (AX80031).
Axial SCX Ride Height Ajusters .
Traxxas Revo/Slayer Pro Alloy GTR Shocks (5460x).
Traxxas Jato Shock springs GTR (0.9 Yellow) (5427).
Turnigy 2200mAh 3s 25c Li-Po.
Mtroniks Plasma45 6.5t (4400kv/rpm) Motor.
Turnigy TrackStar 1/10th Scale 60amp ESC.
Ansmann Racing 14t Pinion 32pitch.
Traxxas 54t Spur Gear 32pitch.
JunFac Universal Drive Shafts (J90026) for Gmade R1 (140mm max lenght).
Steering servo (BMS-660DMG+HS 14.2kg/.17sec) from Hobbyking.
Traxxas T-Max Alloy Servo Guard.
ST Racing Axial SCX/AX10 4 link plate (front and rear).
STRC Alloy C Hubs carriers.
STRC Alloy Steering knuckles.
ProLine D90 Landrover shell.
Custom made links.
Shock hoop braces= 2x 75mm
Front= Upper 86mm Axial Rod ends , Lower 100mm Axial Rod end.
Rear= Upper 91mm Axial Rod ends , Lower 106mm Traxxas Rod ends.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Post your maiden Voyage "JetiPro"||Lv2Fly||Foamies (Kits)||1||Jul 08, 2008 01:00 PM|
|The Blue Frog - Post your pictures & Feedback here!||Hippo||Foamies (Kits)||496||Feb 05, 2004 11:40 PM|
|Post your ideas for The E Zone here||jbourke||Site Chat||68||May 17, 2002 09:54 AM|
|Post your inverted chopper pictures here for a kick !!!||gmamo||Electric Heli Talk||19||Apr 09, 2002 03:13 PM|
|Post your heli specs||Dustin_v16||Electric Heli Talk||16||Feb 22, 2002 10:38 PM|