Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Maniac20, who may elect to delete unwanted replies.
Jun 02, 2008, 10:21 PM
Trader Rating: 27
Registered User

Dynam ESC Program Card

I have a Dynam ESC program card for sale. I sold the heli with the Dynam ESC and no longer have a use for this. It works for all Dynam brushless ESC's, but I don't know if it works with any other brands. It's so much easier to use than trying the stick method that never seems to work right. The available programming options are:

1. Brake: Off - when "On," a zero stick value will halt the main rotor and cause damage - more commonly used for fixed wing aircraft.

2. Outrunner/Normal: Please select which motor you are using – either outrunner motor, or an inrunner.

3. Cutoff: “Soft” is suggested for helicopters – slowly lowers rotor r.p.m. when battery voltage drops.

4. Linear: Sets up a progressive throttle curve that maxes out at full collective/throttle.

6. Logarithm: Advances throttle at a faster rate, allowing more r.p.m. at lower stick values - better suited for outrunner motors.

External 4.6V Power is only necessary when ESC does not have an internal BEC.

I'm asking $8 shipped OBO to the CONUS. Click on the thumbnail for a larger image. Thanks for looking.

Sign up now
to remove ads between posts
Jun 03, 2008, 02:57 AM
Trader Rating: 233
1 paycheck away from homeless
ghostmechanic's Avatar
Originally Posted by Maniac20
, but I don't know if it works with any other brands.
Yeah it'll work with Jeti's too.
Jun 03, 2008, 08:09 AM
Trader Rating: 27
Registered User
Good to know, thanks!
Jun 04, 2008, 09:08 PM
Trader Rating: 11
Registered User
Will you take paypal?
Jun 04, 2008, 09:23 PM
Trader Rating: 11
Registered User
I don't see a low voltage or Lipo/NiCd setting on the card. In the in manual I don't see anything about low voltage for Lipos. I wonder if the ESC is suitable for lipos....maybe I shouldn't use it. It's a Dynam 60A.
Jun 05, 2008, 09:26 AM
Trader Rating: 27
Registered User
I used it on a Dynam 25A on my HB King V2 with a lipo, but I can't vouch for the voltage that it cuts off at; I never measured them when it started to cut out the power. The program card manual says, "Default Voltage: Cut off is set to 0.9V per cell for NiXX, 3.0V per cell for Li-xx."
Jun 05, 2008, 11:23 AM
Trader Rating: 11
Registered User
payment sent....
Jun 05, 2008, 09:08 PM
Trader Rating: 27
Registered User
Sold to Bill.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted **WANTED** Dynam esc program card BowerR64 Aircraft - Electric - Power Systems (FS/W) 1 Apr 22, 2008 07:48 PM
Sold JP Models "LEXX" electric ARF kit with Phasor motor, Jeti 70A ESC, Program card NIB be69ar Aircraft - Electric - Airplanes (FS/W) 1 Jul 20, 2007 09:51 AM
For Sale 2 Brushless Motors, 2 ESCs, & ESC Program Card DBuck42 Aircraft - Electric - Power Systems (FS/W) 6 Jun 05, 2007 04:16 PM
Sold HW/HobbyWing ESC Program Card $7 Shipped timocharis Aircraft - Electric - Power Systems (FS/W) 2 May 04, 2007 06:15 PM
Wanted Jeti Brushless ESC Program Card JayGarcia Aircraft - Electric - Power Systems (FS/W) 2 Aug 18, 2006 09:39 PM