Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jun 18, 2008, 04:56 PM
HandyAndy is offline
Find More Posts by HandyAndy
autogyro andy
HandyAndy's Avatar
What am I looking for with the hang angle for the Kellet?
How is it checked as I have not done one before

Thanks Rich for your kind words.
Sign up now
to remove ads between posts
Old Jun 18, 2008, 05:03 PM
SafeLandings is offline
Find More Posts by SafeLandings
It was a GLITCH! Honestly!
SafeLandings's Avatar


Andy , Get the airframe completed first then you can add the engine servos etc..you can move the battery about to get the correct angle like on this photo..I would say about 14-18 degrees. I have found that it is better to be slightly nose heavy as I had all sorts of problems in the beginning which could have been caused by a tail heavy gyro!
Old Jun 18, 2008, 05:06 PM
HandyAndy is offline
Find More Posts by HandyAndy
autogyro andy
HandyAndy's Avatar
That was quick.

She does look good Rich.

I was thinking of using slightly smaller steel rod for the lower undercarrage arms, and save weight. What are you thoughts?
Old Jun 18, 2008, 05:10 PM
SafeLandings is offline
Find More Posts by SafeLandings
It was a GLITCH! Honestly!
SafeLandings's Avatar
They should be OK..just dont forget the hardwood blocks, it may be a good idea to face the blocks with 1/16" ply also and increase the stress area!
Old Jun 18, 2008, 05:12 PM
HandyAndy is offline
Find More Posts by HandyAndy
autogyro andy
HandyAndy's Avatar
Thats amazing I was thinking of doing that, great minds think alike they say.

Yes I will finish the body, and add the wood blocks.
I can get the angle of 18deg by moving the engine I hope.

I am getting there.
Last edited by HandyAndy; Jun 18, 2008 at 05:19 PM.
Old Jun 18, 2008, 05:21 PM
HandyAndy is offline
Find More Posts by HandyAndy
autogyro andy
HandyAndy's Avatar
Back to the wood cutting, catch you later..
Old Jun 18, 2008, 05:25 PM
SafeLandings is offline
Find More Posts by SafeLandings
It was a GLITCH! Honestly!
SafeLandings's Avatar
Quote:
Originally Posted by HandyAndy
Thats amazing I was thinking of doing that, great minds think alike they say.

Yes I will finish the body, and add the wood blocks.
I can get the angle of 18deg by moving the engine I hope.

I am getting there.

I would'nt say a great mind !! more like too many bad landings that the holes elongated!
Old Jun 24, 2008, 03:36 PM
HandyAndy is offline
Find More Posts by HandyAndy
autogyro andy
HandyAndy's Avatar
I am now starting on the covering.

Not sure which colours to use.
Its difficult to make a decicion when the best ones have been used by Dave and Rich.
Old Jun 24, 2008, 03:54 PM
imsofaman is offline
Find More Posts by imsofaman
Registered User
imsofaman's Avatar
Thanks Andy! Just use a scheme you will be able to see in the air and can find your orientation. I like checkers under the horizontal stab and bright colors ont top of it. That helps me a great deal.

Keep us posted........


Dave
Old Jun 25, 2008, 11:55 AM
SafeLandings is offline
Find More Posts by SafeLandings
It was a GLITCH! Honestly!
SafeLandings's Avatar
Andy,
Im looking forward to you colour scheme...light bright colours help me
I have stripped my Kellet today to investigate the crash damage suffered the other week..its worse that I thougt the mast has cracked somewhere around the area where the vertical fuz meets the horzontal fuz, the pitch servo has broken a mounting lug and as I was tesing the servos the Digital Hitec rudder servo went 'puff'...see photo. I will have to strip the covering back I think ...Oh well all my doing I suppose!
Have you seen the forcast for the weekend ...not good?

Rich
Old Jun 25, 2008, 01:17 PM
jodini is offline
Find More Posts by jodini
AND FOR MY NEXT TRICK....!
jodini's Avatar
AWESOME! Caught it in the action! Sorry about the servo man......
Old Jun 25, 2008, 03:59 PM
HandyAndy is offline
Find More Posts by HandyAndy
autogyro andy
HandyAndy's Avatar
Sorry to see the smoke Rich.
More ebay orders needed perhaps..

If its rain at the weekend then not good to be camping.
It always rains when its Wimbledon week, but not usually all day.
Old Jun 25, 2008, 04:49 PM
imsofaman is offline
Find More Posts by imsofaman
Registered User
imsofaman's Avatar
Rich....what is it with us and servos???? Crazy stuff! I rebuilt one last night, moving it by hand and stipped the gears AGAIN. Heavy handed I guess.

I hated seeing the puff of smoke from the photo...but I did that last week myself. The other night....I too install a digital servo on my Profile Kellett on the rudder. I had stripped my plasitc geared servo.


Carry on guys!

Andy....let's see that color scheme!!!!


Dave
Old Jun 26, 2008, 01:41 AM
SafeLandings is offline
Find More Posts by SafeLandings
It was a GLITCH! Honestly!
SafeLandings's Avatar
Andy,
At the moment it looks like Saturday will be the best day ....I will decide Friday I think!!
Rich
Old Jun 27, 2008, 12:00 PM
HandyAndy is offline
Find More Posts by HandyAndy
autogyro andy
HandyAndy's Avatar
Hello Rich
Yes the weather is very changeable. The wind may be too strong.

I have not finished my build, don't want to print the reasons why, but will talk when we next meet.

Have sent you a text to your phone, give me a call if you do go.

Andy


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Epoxy Paints in the UK geoff.sim Scale Kit/Scratch Built 5 Jul 21, 2008 01:34 PM
Promax 4014 in the UK geoff.sim Electric Plane Talk 6 Jun 30, 2001 06:44 AM
Is there anywhere in the UK as good as Hobby Lobby? trevsie Electric Plane Talk 10 Jun 13, 2001 03:54 AM
Where to buy Matched Cells in the UK grant_smith Electric Plane Talk 1 Jun 10, 2001 01:03 AM
Good sources of battery packs in the UK? Cush Electric Plane Talk 5 May 10, 2001 05:56 PM